Is my Volspeed compatible with Bosch software?
We are constantly evaluating the functionality of our tuning modules with the different software versions from Bosch. An overview of the compatible software versions for our VOLspeed Bosch V2, V3 and V4 modules can be found in the following tables. All older software versions are also compatible.
| Motor Type | Software Version | Compatible | Remark |
| Active Line Gen2 from MY2014 | 1.8.6.0 | yes | |
| Active Line (Plus) Gen3 from MY2018 | 1.2.3.0 1.3.0.0 * 1.3.3.0 * |
yes | |
| Performance Line Gen3 from MY2020 | 1.2.3.0 1.3.0.0 * 1.3.3.0 * |
yes | |
| Performance Line (CX) Gen2 MY2014-2019 | 1.8.6.0 | yes | |
| Performance Line CX Gen4 from MY2020 | 1.0.3.0 1.1.0.0 * 1.1.2.0 * 1.1.5.0 * |
yes | V3 + V4 only |
| Cargo Line from MY2020 | 1.1.2.0 * 1.1.5.0 * |
yes | V3 + V4 only |
*) V2 and V3 only: We recommend setting a maximum speed limit of 35km/h to permanently prevent the tamper detection (error 504) from responding. A higher limit does not necessarily lead to the error, but increases the probability significantly.
| Display Type | Software Version | Compatible | Remark |
| Purion | 1.4.0.0 | yes | |
| Intuvia | 5.9.2.0 | yes | |
| Kiox | 4.0.2.0 | yes | |
| Nyon 1GB | 1.9.2.0 | yes | |
| Nyon 8GB | 2.9.2.0 | yes | |
| Nyon from MY2021 | 3.0.0.0 | yes | 2) |
| Smartphone Hub | 1.0.7.0 | yes | 1) |
| COBI.Bike | 1.16.4 | yes | 1) |
Leave a comment