SpeedFun FURIOUS Evo easy+ for Fazua Ride 60

SpeedFun FURIOUS for Fazua is a revolutionary tuning kit which suppresses the speed limiter of your electric bike.

After installing your SpeedFun, your e-bike’s display will show real data up to 12mph (20km/h) - at higher speeds, the display will show half speed and relative data making it possible, by simply multiplying in mind by two, the calculation of the actual speed and miles or kilometers traveled.

The motor's electric assistance switches off when reaching 37mph (60km/h).

The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:

Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]

After installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated / deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike.

IMPORTANT Activation and deactivation:
- If you want to be able to activate / deactivate the tuning kit, it is necessary to cut/interrupt the blue wire in the shape of a slot that comes out of the black plastic body of the device.
NB: secure the ends of the blue wire with electrician's tape to avoid unwanted contact. - Once this operation has been carried out, the speed release can be activated and deactivated once you need it.


Activation and Deactivation:
- Turn off the ebike.
- Place the chain on the longest gear (the smallest rear sprocket).
- Position the left pedal at 11.00. From now on, do not turn the rear wheel.
- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).
- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet ..).
- Give a strong pedal stroke (only one). Let the wheel spin over 18mph (30 km/h) for a few seconds.

The system recognizes the rotation acceleration and interprets it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.

SpeedFun Furious Evo can be installed on e-bikes equipped with the Fazua Ride 60 system both with Fazua led HUB + Ring Control and with Fazua Control HUB mostly mounted on Riese and Muller, Canyon, Transition Bikes, Pivot Cycles, Wilier and Haibike Lyke.

Ebike with Fazua ride 60 system where the Furious Evo device has been successfully installed:
– Canyon Roadlite:ON 8 LTD
– Canyon Commuter:ON 8 LTD
– Canyon Commuter:ON 8 LTD mid-step
– Pivot Shuttle SL
– Riese & Muller UBN Seven
– Riese & Muller UBN Five
– Wilier ultra hybrid
– Haibike Lyke
– Focus Jam2 SL

When connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

Installation Guide:

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.

The use of SpeedFun may void the warranty of your ebike. We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

Warranty does not cover damage resulting from eBike software updates. Remove the tuning kit before updating the software. Check with us first to ensure the kit is compatible with your updated eBike. We cannot guarantee that the kit will function the same after updates. Please exercise caution.