FAQ:

- Is my warranty safe with Speedbox 2.0?

Yes, Speedbox is undetectable by dealer, but using Speedbox may void your warranty if you service the bike with tuning kit installed. We highly recommend removing Speedbox before servicing your ebike at your local dealer.

- Is it safe to use on my motor and battery?

Yes. Ebike motors were designed to be unrestricted, the speed limits are in place due to legislation, not safety of the motor. They are safe to use.

- Will my range drop after installing tuning kit?

It depends on your riding alone. If you pedal over regular 16mph restricted speed - the motor will use more power and more battery. Our experience shows around 20% decreased range, but 80% more fun in the remaining range.

- Will the Speedbox 2.0 work with Bosch 85Nm update (2020 Gen4 Bosch Motors)?

No, it will not. Speedbox 2.0 is not compatible with 4gen Bosch Motor. You would need Speedbox 3.0 for your ebike.  

- Should I buy Speedbox 2.0 or Speedbox 3.0 ?

We recommend going for Speedbox 3.0 for all Bosch ebikes newer than 2019. If your bike is 2014-2018 - feel free to go with Speedbox 2.0 for Bosch.

- What is 503 error?

503 could mean few things - usually, it's either misaligned magnet with speed sensor on the rear wheel or bad connection from speed sensor. First please check alignment on the rear wheel, and then check if the connectors are not loose or if any speed sensor wires are damaged, that could happen during the installation. 

- Do I need a crank-puller to install the Speedbox?

Depends on your motor. Gen3/Gen2 (2014-2018) motors usually require a crank puller. You can choose to add a crank puller next to 'ADD TO CART' button.