E-Moto OEM Parts

E-Moto OEM Parts

Filter
Complete black LBN rear master cylinder for the Talaria Sting MX5, with Talaria-branded lever and red-tipped switch lead
Close three-quarter view of the Sting MX5 master cylinder, showing the screwed reservoir cap and DOT 3 or DOT 4 warning
Talaria Sting MX5 Rear Brake Complete Master Cylinder (LBN)
54.08 GBP
Black Talaria Komodo side stand at full length, pivot lugs at one end and the flat foot at the other
Reverse of the Komodo side stand, showing the ribbed centre channel and the spring mounting boss
Talaria Komodo Side Stand
33.15 GBP
Complete Talaria Sting MX5 front brake master cylinder in black, with lever, bar clamp and red-capped switch lead
Close-up of the TALARIA-branded master cylinder body, sight glass and cap marked USE ONLY DOT3 OR DOT4
Talaria Sting MX5 Front Brake Complete Master Cylinder (LBN)
52.34 GBP
Black anodised upper handlebar clamp for the Talaria Komodo, outer face up with a bolt hole at each end
Underside of the Komodo upper handlebar clamp, showing the smooth half-round channel that grips the bar
Talaria Komodo Handlebar Upper Clamp
14.39 GBP
Black aluminium Talaria Komodo right foot peg from above, ringed with pointed stainless traction studs
Underside of the Talaria Komodo right foot peg, showing the forked mounting clevis stamped R
Talaria Komodo Right Aluminium Foot Peg – Black
29.65 GBP
Fastace fork guard Talaria MX3/MX4/LB - Left
Fastace fork guard Talaria MX3/MX4/LB - Left
Talaria Sting MX3 / MX4 / LB Fastace Fork Guard – Left
17.44 GBP
Black CNC left footpeg for the Talaria Sting, stainless grip pins ringing the platform and a threaded pivot stud
Talaria left footrest from the heel end, threaded stud and folding pivot clamp ahead of the toothed platform
Talaria Sting MX3 / MX4 / MX5 / XXX Left Footrest Assembly CNC – Black
41.00 GBP
Rectangular black label with the Talaria Sting logo in silver script, red adhesive backing tab at one corner
Talaria Sting MX5 Battery Pack Cover Label
5.67 GBP
Black CNC right footpeg for the Talaria Sting, grip pins across the platform and threaded stud at the pivot
Right footrest tipped to show the mount block face, its bolt holes and the threaded stud
Talaria Sting MX3 / MX4 / MX5 / XXX Right Footrest Assembly CNC – Black
41.00 GBP
Talaria Komodo fork protectors shown as a left and right pair with the small mounting clip beside them
Inner faces of the Talaria Komodo fork guards, showing the upper mounting bosses and the separate clip
Talaria Komodo Replacement Right Side Fork Protector
15.27 GBP
Zinc-plated coil side stand spring with an open hook at each end, for Talaria Sting MX4, Sting R and X3
Talaria Sting MX4 / Sting R / X3 Side Stand Springs
5.67 GBP
Talaria Sting R off-road tail light angled on white, red faceted lens under a clear cover with its wiring loom coiled above
Talaria Sting R tail light seen from behind at an angle, its two threaded mounting studs and slotted back plate facing up
Talaria Sting R Tail Light Offroad
34.90 GBP
Long matte black under-seat fender for the Talaria XXX, angled to show its raised fixing bosses and lipped end
Other side of the Talaria XXX under-seat cover, with notched cut-outs at the wide end and a moulded stamp patch
Talaria XXX Under-Seat Plastic Fender
24.42 GBP
Talaria MX3 L1E handlebar switch: split black clamp with a red ECO/SPORT rocker on top and a short wiring pigtail
Combination Switch to handlebar Talaria MX3 L1E
24.43 GBP
Black faceted battery pack holder cover for Talaria Sting MX3 and MX4, outer face angled up with two threaded bolt holes
Underside of the Talaria Sting MX3/MX4 battery cover, showing the hollow moulding, internal ribs and two-hole bolt plate
Talaria Sting MX3 / MX4 Battery Pack Holder Cover
16.57 GBP
Talaria Komodo rear fender reinforcing holder, a textured black bracket with a triangular cut-out and three bolt holes
The fender holder from the opposite side, its pressed centre rib running down the arm to the single-hole tab
Talaria Komodo Rear Fender Reinforcing Holder
13.08 GBP
Short zinc-plated Talaria kickstand pivot pin, threaded at one end with a hex collar and a stepped, grooved shank
Talaria Kickstand Spring Holding Pin B Short version
7.42 GBP
80/100-21 front inner tube for the Talaria Komodo, folded flat with its metal valve stem facing outward
Close-up of the front tube's rubber folds, showing the moulded seam ribbing and a faint blue guide stripe
Talaria Komodo Original Front Tire Tube 80/100-21
27.04 GBP
Black aluminium left foot peg for the Talaria Komodo, seen from above with steel traction screws ringing the open platform
Underside of the left Komodo foot peg, showing the hollow cast body and the notched seats for the grip screws
Talaria Komodo Left Aluminium Foot Peg – Black
29.65 GBP
Zinc-plated M6x1 battery cover pin for Talaria Sting MX3 and MX4, hex socket head with a threaded mid-section
Talaria Sting MX3 / MX4 Battery Pack Holder Cover Pin (M6x1)
5.67 GBP
Black steel headlight holder for the Talaria Sting, arched cut-out and four slotted mounting arms
Talaria headlight bracket from the other side, folded upright leg with two slotted bolt holes
Talaria Sting MX3 / MX4 / MX5 Headlight Holder
10.90 GBP
Black curved side kickstand leg for Talaria Sting MX3 and MX4, clevis pivot at the top and a flattened foot pad
Talaria Sting MX3 / MX4 Side Kickstand
26.17 GBP
Pair of glossy black Fastace fork guards for the Talaria Sting MX3, MX4 and LB, angled to show their lower mounting feet
Close-up of the fork guard's lower foot, two steel-lined bolt eyelets beside the moulded Fastace logo
Talaria Sting MX3 / MX4 / LB Fastace Fork Guard – Right
17.44 GBP
Surron Hyper Bee headlight at an angle, its oval lens on a winged black bracket with the plug lead and two fixing screws
Overhead view of the Surron Hyper Bee headlight lying lens-up, wiring tail and white connector above, mounting screws below
Surron Hyper Bee Headlight
15.70 GBP
Black rear mud guard for the Surron Hyper Bee laid outer face up, with two bolts and a small clamp bracket beside it
Underside of the Surron Hyper Bee rear mud guard, showing the ribbed clamp end, with the two bolts and bracket alongside
Surron Hyper Bee Rear Mud Guard
21.81 GBP
Zinc-plated steel chain adjuster block for the Surron Hyper Bee, angled to show the stepped axle slot and central bolt hole
Face-on view of the Surron Hyper Bee chain adjuster plate, flat and unmarked with its notched top tab and round axle bore
Surron Hyper Bee Chain Adjustment kit left and right
26.17 GBP
Slim black chain guard for the Surron Hyper Bee shown side-on, two bolt holes along it and one end still in its factory wrap
Surron Hyper Bee Chain Guard
13.96 GBP
Yellow front fender for the Surron Hyper Bee viewed from above, with the bagged mounting bolts and washers laid out next to it
Surron Hyper Bee Front Fender Yellow
26.17 GBP