{"title":"Shimano motor E-Bike Tuning Kits","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe have e-bike tuning kits that fit all Shimano motors. This includes EP8 and EP800, E7000, E8000, E6100, and E5000 motors. Just double-check your ebike's specs to make sure you get the right kit before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur top recommendations are:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/shimano-ep8-e8000-tuning-kits\/products\/e-bike-e-mtb-tuning-kit-peartune-3-0-for-shimano-ep8-2022\" data-mce-href=\"https:\/\/www.twowheelsempire.com\/collections\/shimano-ep8-e8000-tuning-kits\/products\/e-bike-e-mtb-tuning-kit-peartune-3-0-for-shimano-ep8-2022\"\u003e\u003cstrong\u003ePeartune EP8\u003c\/strong\u003e \u003c\/a\u003e for EP8 Shimano motors.\u003cstrong\u003e \u003c\/strong\u003ePeartune also offers options for \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/shimano-ep8-e8000-tuning-kits\/products\/e-bike-e-mtb-tuning-kit-peartune-mso-for-shimano-steps-e8000-with-di2\"\u003e\u003cstrong\u003eShimano E8000\u003c\/strong\u003e \u003c\/a\u003e with Di2 and \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/shimano-ep8-e8000-tuning-kits\/products\/e-bike-e-mtb-tuning-kit-peartune-mso-3-0-for-shimano-e8000-e6100-e6010-e6012-e5000-e7000-2018-2022\"\u003e\u003cstrong\u003eE8000 without Di2\u003c\/strong\u003e\u003c\/a\u003e. \u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/shimano-ep8-e8000-tuning-kits\/products\/speedbox-1-3-for-shimano-ep8\"\u003e\u003cstrong\u003eSpeedbox EP8\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/shimano-ep8-e8000-tuning-kits\/products\/e-bike-e-mtb-tuning-kit-peartune-3-0-for-shimano-ep8-2022\" data-mce-href=\"https:\/\/www.twowheelsempire.com\/collections\/shimano-ep8-e8000-tuning-kits\/products\/e-bike-e-mtb-tuning-kit-peartune-3-0-for-shimano-ep8-2022\"\u003e \u003c\/a\u003e for Shimano EP8 motors.\u003cstrong\u003e \u003c\/strong\u003eSpeedbox also offers for \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/shimano-ep8-e8000-tuning-kits\/products\/speedbox-1-2-for-shimano-e8000-e7000-e6100-e5000\"\u003e\u003cstrong\u003eShimano E8000\u003c\/strong\u003e \u003c\/a\u003e. \u003cmeta charset=\"UTF-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eChoose B.Tuning if you would like to see real data on the Speedbox app.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/shimano-ep8-e8000-tuning-kits\/products\/badassbox-4-for-shimano\"\u003eBadass box \u003c\/a\u003e \u003c\/strong\u003efor Shimano motors, which works with the latest EP801 motors. You just need to identify your speed sensor and choose the correct BadassBox tuning kit.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"e-bike-e-mtb-tuning-kit-peartune-mso-for-shimano-steps-e8000-with-di2","title":"Peartune MSO For Shimano Steps E8000, E7000, E6100, E5000 with Di2","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThis Peartune tuning kit removes the 16mph (25km\/h) speed limit, allowing the motor to help you at higher speeds. For these Shimano bikes, the speed limit is raised to \u003cb\u003e31mph (50km\/h).\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eReal speed will be displayed up to 14-15mph (22-25km\/h), at higher speeds the bike will show incorrect, slower than real speeds. \u003c\/b\u003e\n\n\u003ch3\u003eHow does the Peartune work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:\n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe tuning kit is designed to automatically activate when the eBike is powered on. When PearTune is active - you will be able to ride at a speed of 25 mph (40 km\/h) and even up to 31 mph (50 km\/h)!\n\u003cbr\u003e\u003cbr\u003e\n\nNOTE 1: Real speed will be displayed up to 14-15mph (21-25km\/h), at higher speeds the bike will show incorrect, slower than real speeds.\n\u003cbr\u003e\u003cbr\u003e\n\nNOTE 2: If the bike's lights are programmed to remain permanently ON, the tuning kit will not function. The tuning kit requires the lights to be OFF for activation.\n\u003cbr\u003e\u003cbr\u003e\n\n\nIf You can switch the lights ON and OFF - tuning kit can be deactivated by switching the lights ON. Your e-bike will then work the same as before installation of the chip.\n\u003cbr\u003e\u003cbr\u003e\n\nI don't have lights active but I want to be able to deactivate my tuning kit:\n\u003cbr\u003e\u003cbr\u003e\n\n Many bikes are delivered with the lights function inactive, which can be activated by any Shimano service upon request.\n\n\u003ch3\u003eIs this Peartune the right tuning kit for my bike?\u003c\/h3\u003e\nThis Peartune tuning kit is made to fit bicycles with the Shimano E8000 \/ E7000 \/ E5000 \/ E6002 \/ E6012 \/ E6100 motors \u003cb\u003ewith electronic gear shifting system Di2.\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\nIf your E-bike does not have a Di2 system, you would need \u003cb\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/e-bike-e-mtb-tuning-kit-peartune-mso-3-0-for-shimano-e8000-e6100-e6010-e6012-e5000-e7000-2018-2022\" target=\"_blank\"\u003ePeartune MSO 3.0 For Shimano E8000, E6100, E6010, E6012, E5000, E7000 without Di2\u003c\/a\u003e\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\nNot Compatible with Shimano EP8 motor, you would need \u003cb\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/e-bike-e-mtb-tuning-kit-peartune-3-0-for-shimano-ep8-2022\" target=\"_blank\"\u003ePeartune for Shimano EP8 motor.\u003c\/a\u003e\u003c\/b\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us. \n\u003cbr\u003e\u003cbr\u003e\nIf you are planning to install Peartune on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/MANUAL_-_Shimano_Panasonic_Bafang_UART_EN.pdf?v=1671527612\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF\u003c\/a\u003e\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides 2 years warranty to all their products.\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides Lifetime warranty to all their products.","brand":"PearTune","offers":[{"title":"Default Title","offer_id":31792785064070,"sku":"PT-MSO-SH1-Di2","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/peartune-mso-for-shimano-steps-e8000-e7000-e6100-e5000-with-di2-pt-mso-sh1-di2-1145469378.jpg?v=1741936495"},{"product_id":"e-bike-e-mtb-tuning-kit-peartune-mso-3-0-for-shimano-e8000-e6100-e6010-e6012-e5000-e7000-2018-2022","title":"Peartune MSO 3.0 For Shimano E8000, E6100, E6010, E6012, E5000, E5100, E7000 without DI2","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThis Peartune tuning kit removes the 16mph (25km\/h) speed limit, allowing the motor to help you at higher speeds. For these Shimano bikes, the speed limit is raised to \u003cb\u003e31mph (50km\/h).\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eReal speed will be displayed up to 14-15mph (22-25km\/h), at higher speeds the bike will show incorrect, slower than real speeds. \u003c\/b\u003e\n\n\u003ch3\u003eHow does the Peartune work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:\n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe tuning kit is designed to automatically activate when the eBike is powered on. When PearTune is active - you will be able to ride at a speed of 25 mph (40 km\/h) and even up to 31 mph (50 km\/h)!\n\u003cbr\u003e\u003cbr\u003e\n\nNOTE 1: Real speed will be displayed up to 14-15mph (21-25km\/h), at higher speeds the bike will show incorrect, slower than real speeds.\n\u003cbr\u003e\u003cbr\u003e\n\nNOTE 2: If the bike's lights are programmed to remain permanently ON, the tuning kit will not function. The tuning kit requires the lights to be OFF for activation.\n\u003cbr\u003e\u003cbr\u003e\n\n\nIf You can switch the lights ON and OFF - tuning kit can be deactivated by switching the lights ON. Your e-bike will then work the same as before installation of the chip.\n\u003cbr\u003e\u003cbr\u003e\n\nI don't have lights active but I want to be able to deactivate my tuning kit:\n\u003cbr\u003e\u003cbr\u003e\n\n Many bikes are delivered with the lights function inactive, which can be activated by any Shimano service upon request.\n\n\u003ch3\u003eIs this Peartune the right tuning kit for my bike?\u003c\/h3\u003e\nThis Peartune tuning kit is made to fit bicycles with the Shimano E8000 \/ E7000 \/ E5000 \/ E5100 \/ E6001 \/ E6002 \/ E6010, E6012, E6020, E6100 \/ E6101 motors, with all displays compatible with these motors.\n\u003cbr\u003e\u003cbr\u003e\nNot Compatible with Shimano E8000 \/ E7000 \/ E5000 Di2 (electronic gear shifting system). For the ebikes with Di2 you would need \u003cb\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/e-bike-e-mtb-tuning-kit-peartune-mso-for-shimano-steps-e8000-with-di2\" target=\"_blank\"\u003ePeatune for Shimano with Di2.\u003c\/a\u003e\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\nNot Compatible with Shimano EP8 motor, you would need \u003cb\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/e-bike-e-mtb-tuning-kit-peartune-3-0-for-shimano-ep8-2022\" target=\"_blank\"\u003ePeartune for Shimano EP8 motor.\u003c\/a\u003e\u003c\/b\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us. \n\u003cbr\u003e\u003cbr\u003e\nIf you are planning to install Peartune on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/MANUAL_-_Shimano_Panasonic_Bafang_UART_EN.pdf?v=1671527612\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF\u003c\/a\u003e\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides 2 years warranty to all their products.\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides Lifetime warranty to all their products.","brand":"PearTune","offers":[{"title":"Default Title","offer_id":34703312945286,"sku":"PT-MSO-SH1","price":189.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/e-bike-e-mtb-tuning-kit-peartune-for-shimano-steps-e8000-e7000-e6100-e5000-with-di2-pt-mso-sh1-1145469142.jpg?v=1741936489"},{"product_id":"e-bike-e-mtb-tuning-kit-peartune-3-0-for-shimano-ep8-2022","title":"PearTune 3.0 for Shimano EP8, EP8-RS","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThis Peartune tuning kit removes the 16mph (25km\/h) speed limit, allowing the motor to help you at higher speeds. For these Shimano bikes, the speed limit is raised to \u003cb\u003e31mph (50km\/h).\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eReal speed will be displayed up to 14-15mph (21-25km\/h), at higher speeds the bike will show incorrect, slower than real speeds. \u003c\/b\u003e\n\n\u003ch3\u003eHow does the Peartune work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:\n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe tuning kit is designed to automatically activate when the eBike is powered on. When PearTune is active - you will be able to ride at a speed of 25 mph (40 km\/h) and even up to 31 mph (50 km\/h)!\n\u003cbr\u003e\u003cbr\u003e\n\nNOTE 1: Real speed will be displayed up to 14-15mph (21-25km\/h), at higher speeds the bike will show incorrect, slower than real speeds.\n\u003cbr\u003e\u003cbr\u003e\n\nNOTE 2: If the bike's lights are programmed to remain permanently ON, the tuning kit will not function. The tuning kit requires the lights to be OFF for activation.\n\u003cbr\u003e\u003cbr\u003e\n\n\nIf You can switch the lights ON and OFF - tuning kit can be deactivated by switching the lights ON. Your e-bike will then work the same as before installation of the chip.\n\u003cbr\u003e\u003cbr\u003e\n\nI don't have lights active but I want to be able to deactivate my tuning kit:\n\u003cbr\u003e\u003cbr\u003e\n\n Many bikes are delivered with the lights function inactive, which can be activated by any Shimano service upon request.\n\n\u003ch3\u003eIs this Peartune the right tuning kit for my bike?\u003c\/h3\u003e\nThis Peartune tuning kit is made to fit all Shimano EP8 and EP8-RS motors, with all Shimano displays made for EP8 motors. Not compatible with Shimano EP801!\n\u003cbr\u003e\u003cbr\u003e\nWorks with the Giant Revolt E+ Di2 powered by Shimano EP8 (mind product options)\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNot Compatible\u003c\/b\u003e with Shimano E8000 \/ E7000 \/ E5000. You would need \u003cb\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/e-bike-e-mtb-tuning-kit-peartune-mso-3-0-for-shimano-e8000-e6100-e6010-e6012-e5000-e7000-2018-2022\" target=\"_blank\"\u003ePeatune for Shimano E8000 \/ E7000 \/ E5000.\u003c\/a\u003e\u003c\/b\u003e\nNot Compatible with Shimano EP801. You would need \u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/peartune-3-0-tuning-kit-for-shimano-ep801-and-ep6-motors\" target=\"_blank\"\u003ePearTune 3.0 for Shimano EP801\/EP6\u003c\/a\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nThe MSO can be activated or deactivated anytime using the bike menu's light control function. Refer to the bike manual for detailed instructions. If the lights are ON, PearTune MSO is OFF. When the lights are OFF, PearTune MSO is ON. If you disconnect the red power cable, PearTune MSO will be \"always ON,\" meaning it will activate automatically when you switch on your bike. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\u003cbr\u003e\nIf you are planning to install PearTune on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/MANUAL_-_Shimano_Panasonic_Bafang_UART_EN.pdf?v=1671527612\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF\u003c\/a\u003e\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides 2 years warranty to all their products.\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides Lifetime warranty to all their products.","brand":"PearTune","offers":[{"title":"Shimano EP8","offer_id":40365780041862,"sku":"PT-MSO-EP8","price":219.0,"currency_code":"EUR","in_stock":true},{"title":"Giant Revolt E+ EP8","offer_id":40365780074630,"sku":"PT-MSO-EP8+E","price":219.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/peartune-3-0-for-shimano-ep8-1145467663.jpg?v=1741936440"},{"product_id":"speedbox-1-2-b-tuning-for-shimano-e8000-e7000-e6100-e5000","title":"SpeedBox 1.2 B.Tuning for Shimano (E8000, E7000, E6100, E5000)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nFrom the ground up redesigned tuning chip for your e-bike with a Shimano motor – with a new design, completely new hardware and firmware, and Bluetooth technology to connect your e-bike with a mobile app.\n\u003cbr\u003e\u003cbr\u003e\nSpeedBox 1.2 B.Tuning offers a unique connection between your e-bike and mobile phone. This tuning chip is a top-notch product perfectly optimized for the most powerful ride and experience. It suppresses the speed limiter so you can enjoy your ride at unlimited speed. After pairing with the SpeedBox App mobile application, you will see real riding data on your phone’s display. You may also set the speed limit of your own choice. Monitor and store all the parameters of your trip on the display of your phone in any place, anytime.\n\n\u003ch3\u003eHow does SpeedBox 1.2B work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:\n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe SpeedBox 1.3 tuning chip enables you to suppress the speed limiter on your electric bike. This unlocks the power of the Shimano motor, allowing you to achieve unlimited speed. When in use, the actual speed will appear on your display up to 14 mph (23 km\/h).\n\u003cbr\u003e\u003cbr\u003e\nThe manufacturer recommends keeping the maximum speed for Giant models up to 21-22 mph (35 km\/h).\n\u003cbr\u003e\u003cbr\u003e\nTo see the correct speed and all riding data during your ride, refer to the SpeedBox App on your smartphone.\n\u003cbr\u003e\u003cbr\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/sb12bt_s-6c.jpg?v=1716196348\" class=\"img-fluid\"\u003e\n\u003cbr\u003e\u003cbr\u003e\nThis tuning chip is very easy to control - via mobile app or by turning on\/off the lights. If the lights are turned off, SpeedBox is activated. The chip can be easily deactivated by turning on the lights. A new feature in this SpeedBox version is the possibility of activating the double-click function in the app. By activating this function, the lights become independent of tuning. By double-clicking on the LIGHT button, the lights will flash, and the tuning will turn on. If you double-click on the button again, the tuning will turn off and the e-bike will work the same as without a chip.\n\u003cbr\u003e\u003cbr\u003e\nYou can set the preferable maximum speed limit in the app.\n\n\u003ch3\u003eWhich Speedbox Tuning Kit do I need?\u003c\/h3\u003e\nCompared to previous versions, this new product also plugs into the engine's E-Tube port. It is therefore necessary that the e-bike motor in which you are going to install the new version of SpeedBox for Shimano has one free E-Tube port. In case you do not have a free E-Tube port in the motor, please select “+E-Tube Port” variant. It is highly recommended to open the motor and refer to product pictures if you are uncertain about the situation under the cover.\n\u003cbr\u003e\u003cbr\u003e\nE-bikes, which do not have a free E-Tube port, are usually those with a Di2 electronic gear shifting system, or with a tube integrated Satellite System ON\/OFF Switch (EW-SW100, EW-SW300).\n\u003cbr\u003e\u003cbr\u003e\nThis tuning kit is not compatible with EP8 motors. You would need \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/all\/products\/speedbox-1-3-for-shimano-ep8?variant=40053690105990\" target=\"_blank\"\u003eSpeedbox 1.3 for Shimano EP8\u003c\/a\u003e\n\u003cbr\u003e\u003cbr\u003e\nThis tuning kit is not compatible with EP801 and EP6 motors. You would need \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/all\/products\/peartune-3-0-tuning-kit-for-shimano-ep801-and-ep6-motors\" target=\"_blank\"\u003e Peartune for Shimano EP801 and EP6 motors.\u003c\/a\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWe use original connectors for the production of SpeedBox chips ensuring that the installation process is very simple and the chip is connected properly. We have also prepared detailed instructions and videos to make installation easy for you. Disassembly of the tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\nIf you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/SB12BT_S_connection.pdf?v=1669984337\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF \u003c\/a\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/DQaW6irHP6A\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedBox may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nSpeedBox Products are thoroughly tested and we stand by their quality. SpeedBox provide Life Long warranty to all their Products!\n\u003cbr\u003e\u003cbr\u003e\nIf You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team","brand":"Speedbox","offers":[{"title":"'+E Tube Port","offer_id":40053690171526,"sku":"SB12_S_BT_E8000+E","price":319.0,"currency_code":"EUR","in_stock":true},{"title":"Normal","offer_id":39802646298758,"sku":"SB12_S_BT_E8000","price":309.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/speedbox-1-2-b-tuning-for-shimano-e8000-e7000-e6100-e5000-1145468554.jpg?v=1741936372"},{"product_id":"speedbox-1-2-for-shimano-e8000-e7000-e6100-e5000","title":"SpeedBox 1.2 for Shimano (E8000, E7000, E6100, E5000)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nFrom the ground up redesigned tuning chip for your e-bike with a Shimano motor – with a new design and completely new hardware and firmware.\n\u003cbr\u003e\u003cbr\u003e\nThe SpeedBox 1.2 tuning chip allows you to suppress the speed limiter on your electric bike, unlocking the full power of the Shimano motor and enabling you to achieve unlimited speed.\n\u003cbr\u003e\u003cbr\u003e\nNote: The Speedbox App is an application specially designed for Speedbox B. Tuning products only. With a non-Bluetooth Speedbox product like this one, the Speedbox App is unavailable.\n\u003cbr\u003e\u003cbr\u003e\n\u003ca href=\"speedbox-1-2-b-tuning-for-shimano-e8000-e7000-e6100-e5000\"\u003eSpeedBox 1.2 B.Tuning for Shimano (E8000, E7000, E6100, E5000)\u003c\/a\u003e\n\n\u003ch3\u003eHow does SpeedBox 1.2 work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:\n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe SpeedBox 1.2 tuning chip enables you to suppress the speed limiter on your electric bike. This unlocks the power of the Shimano motor, allowing you to achieve unlimited speed. When in use, the actual speed will appear on your display up to 14 mph (23 km\/h).\n\u003cbr\u003e\u003cbr\u003e\nThe manufacturer recommends keeping the maximum speed for Giant models up to 21-22 mph (35 km\/h).\n\u003cbr\u003e\u003cbr\u003e\nIf you want to see correct speed and all riding data during your ride, we recommend choosing \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/all\/products\/speedbox-1-2-b-tuning-for-shimano-e8000-e7000-e6100-e5000?variant=40053690171526\" target=\"_blank\"\u003eSpeedBox 1.2 B.Tuning for Shimano \u003c\/a\u003e - you can see the real values in our SpeedBox App – right on the display of your phone.\n\u003cbr\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/sb12bt_s-6c.jpg?v=1716196348\" class=\"img-fluid\"\u003e\n\u003cbr\u003e\u003cbr\u003e\nThis tuning chip can be easily controlled with the LIGHT button. If the lights are off, SpeedBox is activated. The chip can be deactivated by turning on the lights. If your eBike does not have lights or the function is not active, or if you prefer your tuning kit to work independently of the lights, do not connect the red wire during installation. This will keep the tuning always activated.\n\n\u003ch3\u003eWhich Speedbox Tuning Kit do I need?\u003c\/h3\u003e\nCompared to previous versions, this new product also plugs into the engine's E-Tube port. It is therefore necessary that the e-bike motor in which you are going to install the new version of SpeedBox for Shimano has one free E-Tube port. In case you do not have a free E-Tube port in the motor, please select “+E-Tube Port” variant. It is highly recommended to open the motor and refer to product pictures if you are uncertain about the situation under the cover.\n\u003cbr\u003e\u003cbr\u003e\nE-bikes, which do not have a free E-Tube port, are usually those with a Di2 electronic gear shifting system, or with a tube integrated Satellite System ON\/OFF Switch (EW-SW100, EW-SW300).\n\u003cbr\u003e\u003cbr\u003e\nThis tuning kit is not compatible with EP8 motors. You would need \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/all\/products\/speedbox-1-3-for-shimano-ep8?variant=40053690105990\" target=\"_blank\"\u003eSpeedbox 1.3 for Shimano EP8\u003c\/a\u003e\n\u003cbr\u003e\u003cbr\u003e\nThis tuning kit is not compatible with EP801 and EP6 motors. You would need \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/all\/products\/peartune-3-0-tuning-kit-for-shimano-ep801-and-ep6-motors\" target=\"_blank\"\u003e Peartune for Shimano EP801 and EP6 motors.\u003c\/a\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWe use original connectors for the production of SpeedBox chips ensuring that the installation process is very simple and the chip is connected properly. We have also prepared detailed instructions and videos to make installation easy for you. Disassembly of the tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\nIf you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/SB12BT_S_connection.pdf?v=1669984337\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF \u003c\/a\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/DQaW6irHP6A\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedBox may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nSpeedBox Products are thoroughly tested and we stand by their quality. SpeedBox provide Life Long warranty to all their Products!\n\u003cbr\u003e\u003cbr\u003e\nIf You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team","brand":"Speedbox","offers":[{"title":"'+E Tube Port","offer_id":40053690138758,"sku":"SB12_S_E8000+E","price":239.0,"currency_code":"EUR","in_stock":true},{"title":"Normal","offer_id":39802646331526,"sku":"SB12_S_E8000","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/speedbox-1-2-for-shimano-e8000-e7000-e6100-e5000-1145468562.jpg?v=1741936369"},{"product_id":"speedbox-1-3-for-shimano-ep8","title":"SpeedBox 1.3 for Shimano (EP8)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nFrom the ground up redesigned tuning chip for your e-bike with a Shimano motor – with a new design and completely new hardware and firmware.\n\u003cbr\u003e\u003cbr\u003e\nThe SpeedBox 1.3 tuning chip allows you to suppress the speed limiter on your electric bike, unlocking the full power of the Shimano motor and enabling you to achieve unlimited speed.\n\u003cbr\u003e\u003cbr\u003e\nNote: The Speedbox App is an application specially designed for Speedbox B. Tuning products only. With a non-Bluetooth Speedbox product like this one, the Speedbox App is unavailable.\n\u003cbr\u003e\u003cbr\u003e\n\u003ca href=\"speedbox-1-3-b-tuning-for-shimano-ep8\"\u003eSpeedBox 1.3 B.Tuning for Shimano (EP8)\u003c\/a\u003e\n\n\u003ch3\u003eHow does SpeedBox 1.3 work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nThe SpeedBox 1.3 tuning chip enables you to suppress the speed limiter on your electric bike. This unlocks the power of the Shimano motor, allowing you to achieve unlimited speed. When in use, the actual speed will appear on your display up to 14 mph (23 km\/h).\n\u003cbr\u003e\u003cbr\u003e\nThe manufacturer recommends keeping the maximum speed for Giant models up to 21-22 mph (35 km\/h).\n\u003cbr\u003e\u003cbr\u003e\nIf you want to see correct speed and all riding data during your ride, we recommend choosing SpeedBox 1.3 B.Tuning for Shimano - you can see the real values in our SpeedBox App – right on the display of your phone.\n\u003cbr\u003e\u003cbr\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/sb13_s-6c.jpg?v=1716193841\"\u003e\n\u003cbr\u003e\u003cbr\u003e\nThis tuning chip can be easily controlled with the LIGHT button. If the lights are off, SpeedBox is activated. The chip can be deactivated by turning on the lights. If your eBike does not have lights or the function is not active, or if you prefer your tuning kit to work independently of the lights, do not connect the red wire during installation. This will keep the tuning always activated.\n\n\u003ch3\u003eWhich Speedbox Tuning Kit do I need?\u003c\/h3\u003e\nCompared to previous versions, this new product also plugs into the engine's E-Tube port. It is therefore necessary that the e-bike motor in which you are going to install the new version of SpeedBox for Shimano has one free E-Tube port. In case you do not have a free E-Tube port in the motor, please select “+E-Tube Port” variant. It is highly recommended to open the motor and refer to product pictures if you are uncertain about the situation under the cover. \u003cbr\u003e\u003cbr\u003e\n\nE-bikes, which do not have a free E-Tube port, are usually those with a Di2 electronic gear shifting system, or with a tube integrated Satellite System ON\/OFF Switch (EW-SW100, EW-SW300).\n\u003cbr\u003e\u003cbr\u003e\nThis tuning kit does not support Shimano EP801 and EP6 motors. For Shimano EP801 and EP6 motors you would need \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/all\/products\/peartune-3-0-tuning-kit-for-shimano-ep801-and-ep6-motors\"\u003ePeartune for Shimano EP801 and EP6\u003c\/a\u003e\n\u003cbr\u003e\u003cbr\u003e\nFor the Shimano E8000, E7000, E6100, E5000 motors, you would need \u003cb\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/speedbox-1-2-for-shimano-e8000-e7000-e6100-e5000\" target=\"_blank\"\u003eSpeedbox Shimano 1.2 tuning kit. \u003c\/a\u003e\u003c\/b\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWe use original connectors for the production of SpeedBox chips ensuring that the installation process is very simple and the chip is connected properly. We have also prepared detailed instructions and videos to make installation easy for you. Disassembly of the tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\u003cbr\u003e\nIf you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the chip is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/j64faea9e7cd74-sb13-s-manual-en.pdf?v=1716194128\" class=\"btn\"\u003eInstallation guide\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/ES7kvsALX1c\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedBox may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nSpeedBox Products are thoroughly tested and we stand by their quality. SpeedBox provide Life Long warranty to all their Products!\n\u003cbr\u003e\u003cbr\u003e\nIf You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team","brand":"Speedbox","offers":[{"title":"'+E Tube Port","offer_id":40053690105990,"sku":"SB13_S_EP8+E","price":239.0,"currency_code":"EUR","in_stock":true},{"title":"Normal","offer_id":39802645479558,"sku":"SB13_S_EP8","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/speedbox-1-3-for-shimano-ep8-sb13-s-ep8-1145468561.jpg?v=1741936365"},{"product_id":"speedbox-1-3-b-tuning-for-shimano-ep8","title":"SpeedBox 1.3 B.Tuning for Shimano (EP8)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nFrom the ground up redesigned tuning chip for your e-bike with a Shimano motor – with a new design, completely new hardware and firmware, and Bluetooth technology to connect your e-bike with a mobile app.\n\u003cbr\u003e\u003cbr\u003e\nSpeedBox 1.3 B.Tuning offers a unique connection between your e-bike and mobile phone. This tuning chip is a top-notch product perfectly optimized for the most powerful ride and experience. It suppresses the speed limiter so you can enjoy your ride at unlimited speed. After pairing with the SpeedBox App mobile application, you will see real riding data on your phone’s display. You may also set the speed limit of your own choice. Monitor and store all the parameters of your trip on the display of your phone in any place, anytime.\n\n\u003ch3\u003eHow does SpeedBox 1.3 B. Tuning work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nThe SpeedBox 1.3 tuning chip enables you to suppress the speed limiter on your electric bike. This unlocks the power of the Shimano motor, allowing you to achieve unlimited speed. When in use, the actual speed will appear on your display up to 14 mph (23 km\/h).\n\u003cbr\u003e\u003cbr\u003e\nThe manufacturer recommends keeping the maximum speed for Giant models up to 21-22 mph (35 km\/h).\n\u003cbr\u003e\u003cbr\u003e\nTo see the correct speed and all riding data during your ride, refer to the SpeedBox App on your smartphone.\n\u003cbr\u003e\u003cbr\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/sb13_s-6c.jpg?v=1716193841\" class=\"img-fluid\"\u003e\n\u003cbr\u003e\u003cbr\u003e\nThis tuning chip is very easy to control - via mobile app or by turning on\/off the lights. If the lights are turned off, SpeedBox is activated. The chip can be easily deactivated by turning on the lights. A new feature in this SpeedBox version is the possibility of activating the double-click function in the app. By activating this function, the lights become independent of tuning. By double-clicking on the LIGHT button, the lights will flash, and the tuning will turn on. If you double-click on the button again, the tuning will turn off and the e-bike will work the same as without a chip. \n\u003cbr\u003e\u003cbr\u003e\nYou can set the preferable maximum speed limit in the app.\n\n\u003ch3\u003eWhich Speedbox Tuning Kit do I need?\u003c\/h3\u003e\nCompared to previous versions, this new product also plugs into the engine's E-Tube port. It is therefore necessary that the e-bike motor in which you are going to install the new version of SpeedBox for Shimano has one free E-Tube port. In case you do not have a free E-Tube port in the motor, please select “+E-Tube Port” variant. It is highly recommended to open the motor and refer to product pictures if you are uncertain about the situation under the cover. \u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\nE-bikes, which do not have a free E-Tube port, are usually those with a Di2 electronic gear shifting system, or with a tube integrated Satellite System ON\/OFF Switch (EW-SW100, EW-SW300).\n\u003cbr\u003e\u003cbr\u003e\nThis tuning kit does not support Shimano EP801 and EP6 motors. For Shimano EP801 and EP6 motors you would need \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/all\/products\/peartune-3-0-tuning-kit-for-shimano-ep801-and-ep6-motors\"\u003ePeartune for Shimano EP801 and EP6\u003c\/a\u003e\n\u003cbr\u003e\u003cbr\u003e\nFor the Shimano E8000, E7000, E6100, E5000 motors, you would need \u003cb\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/speedbox-1-2-for-shimano-e8000-e7000-e6100-e5000\" target=\"_blank\"\u003eSpeedbox Shimano 1.2 tuning kit. \u003c\/a\u003e\u003c\/b\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWe use original connectors for the production of SpeedBox chips ensuring that the installation process is very simple and the chip is connected properly. We have also prepared detailed instructions and videos to make installation easy for you. Disassembly of the tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\u003cbr\u003e\nIf you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the chip is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/j64faea9e7cd74-sb13-s-manual-en.pdf?v=1716194128\" class=\"btn\"\u003eInstallation guide\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/ES7kvsALX1c\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedBox may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nSpeedBox Products are thoroughly tested and we stand by their quality. SpeedBox provide Life Long warranty to all their Products!\n\u003cbr\u003e\u003cbr\u003e\nIf You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team","brand":"Speedbox","offers":[{"title":"'+E Tube Port","offer_id":40053690073222,"sku":"SB13_S_BT_EP8+E","price":319.0,"currency_code":"EUR","in_stock":true},{"title":"Normal","offer_id":39802646200454,"sku":"SB13_S_BT_EP8","price":309.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/speedbox-1-3-b-tuning-for-shimano-ep8-sb13-s-bt-ep8-1145468560.jpg?v=1741936360"},{"product_id":"mbiq-p-tuning-kit-for-shimano-ep801-ep6-ep600-motors","title":"MBIQ-P tuning kit for Shimano EP801\/ EP801-RS \/ EP6 \/ EP600 motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThis MBIQ-P tuning kit removes the 16mph (25km\/h) speed limit, allowing the motor to help you at higher speeds. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eReal speed will be displayed up to 14-15mph (22-25km\/h), at higher speeds the bike will show incorrect, slower than real speeds. \u003c\/b\u003e\n\n\u003ch3\u003eHow does the MBIQ-P work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe MBIQ-P for Shimano EP801\/EP6\/EP600 mid-drive motors is a \"hybrid\" tuning module with two different manipulation modes. It was specifically developed for the latest generation of motors. In addition to the classic \"Freeze\" mode, there is also the innovative \"Damp\" mode.\n\u003cbr\u003e\u003cbr\u003e\nThe MBIQ-P module overrides the preset 25 km\/h speed limit, allowing the maximum speed to be individually adjusted as needed. No additional devices (e.g., a PC or smartphone) are required. The default setting allows a maximum speed of up to 34 km\/h.\n\u003cbr\u003e\u003cbr\u003e\nEasy installation: The existing speed sensor can be plugged in directly. The tuning features the same connectors as the existing sensor cable, allowing for easy integration between the speed sensor and the engine control unit.\n\u003cbr\u003e\u003cbr\u003e\nPlease note: To gain access to the corresponding connectors, the engine cover must be removed briefly.  Important: In some e-bike models the motor is integrated into the frame - in this case it must be completely removed to access the connections (e.g. ORBEA, ....).\n\u003cbr\u003e\u003cbr\u003e\nThe MBIQ-P is compatible with the manufacturers' common motor firmwares and is microcontroller-based.\n\u003cbr\u003e\u003cbr\u003e\n“Hybrid Tamper”\nInstead of the familiar FREEZE manipulation (freezing the speedometer at 25 km\/h), the MBIQ-P module uses a new, additional manipulation method, the DAMP mode. This \"damps\" the output manipulated speed according to an algorithm, reaching a final speed by a factor of X.\n\u003cbr\u003e\u003cbr\u003e\nNote: According to the manufacturer, the \"Freeze\" mode is disabled for the specified Shimano motors due to the manipulation detection of the motor software not recommended. However, the module is already set to DAMP mode (factory setting 1,35 = approximately 34 km\/h top speed).\n\u003cbr\u003e\u003cbr\u003e\nFunctionality\nThe current speed profile is analyzed, processed and - if tuning is activated - manipulated values ​​are output.\n\u003cbr\u003e\u003cbr\u003e\nDisplay in the e-bike display\nSteam mode: The output speed corresponds approximately to the actual speed, but damped by a preset, configurable factor. The factory setting is 1,35.\n\u003cbr\u003e\u003cbr\u003e\nHere's an example: Output value = 25 km\/h, actual top speed 33,75 km\/h. (25 * 1,35 = 33,75)\n\u003cbr\u003e\u003cbr\u003e\nFreeze mode: Up to a value of approximately 22 to 25 km\/h, the displayed speed roughly corresponds to the actual speed (varies depending on the system). At higher (real) speeds, the displayed value always remains around this range, but never higher than 25 km\/h.\n\u003cbr\u003e\u003cbr\u003e\nHere is an example: The displayed speed is 22 km\/h, but in reality the speed is around 40 km\/h, etc.\n\u003cbr\u003e\u003cbr\u003e\nThe total kilometers displayed are also lower for journeys with active tuning for the corresponding range.\nCustomer-programmable: The functionality of the tuning module can be programmed after installation without the need for additional equipment. For example, you can specify whether the tuning should be active permanently or only for the current ride (\"tuning based on power-on condition\"). The maximum speed can also be set. Programming is performed when the e-bike is started up using specific wheel movements. The sensor must be guided along the spoke magnet, which causes specific values ​​to appear on the display (see illustration below). Detailed operating instructions are included.\n\u003cbr\u003e\u003cbr\u003e\nImportant: In the delivery state, the MBIQ-P module is in DAMP mode with a set factor of 1,35This allows top speeds of up to approximately 34 km\/h. Adjusting the value\/mode is the owner's responsibility and may (but does not necessarily) lead to tamper detection. This is signaled by the error code: E295. If this code appears, the value\/mode must be adjusted back immediately.\n\u003cbr\u003e\u003cbr\u003e\nAttention! If error E295 is ignored multiple times, the entire drive unit will be locked and error E299 will be displayed. This can only be reversed by the dealer!\n\n\u003ch3\u003eIs this MBIQ-P the right tuning kit for my bike?\u003c\/h3\u003e\nMBIQ-P for Shimano EP801 \/ EP6 \/ EP600 – Compatibility.\u003cbr\u003e\nThis tuning module is only compatible with the following Shimano e-bike drives:\n\u003cbr\u003e\nEP801 \/ RS (DU-EP801) \/ also compatible with software version 4.3.0...\u003cbr\u003e\nEP6 \/ EP600 (DU-EP600) \u003cbr\u003e\nAlso compatible with Di2, although the automatic mode may react slightly differently due to the damping.\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nImportant instructions:\n\u003cbr\u003e\n-Due to the possible tuning detection, the operating mode Freeze is not recommended. Adjusting the multiplier in DAMP mode is also done at your own risk, as excessively high values ​​can lead to malfunctions (the default setting is 1,35, which corresponds to a maximum speed of approximately 34 km\/h).\n\u003cbr\u003e\u003cbr\u003e\n-For the tuning to work properly with EP801 and EP6 drives, the ACC connection must be activated! Unfortunately, this is not the case for all models.If the ACC connection cannot be activated, the module can also be connected to the lights. The disadvantage of this solution is that activation via the lights is not possible, and the lights must always be on.\n\u003cbr\u003e\u003cbr\u003e\n-Speed-based assistance systems such as electronic Di2 shifting also receive the manipulated signals for processing and must be adjusted accordingly. Proper functioning cannot be guaranteed in general!\n\u003cbr\u003e\u003cbr\u003e\n“Anti-tuning” ready\u003cbr\u003e\nThe MBIQ-P is compatible with common engine firmwares from manufacturers. The manipulated values ​​do not affect the engine software's evaluation.\n\u003cbr\u003e\u003cbr\u003e\nEasy installation - The tuning is simply plugged between the existing sensor cable and the motor. If necessary, it can be removed again to restore the e-bike to its original condition.\nCompatible connectors - The tuning module has the same connectors for an optimal connection.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/BA-MBIQ_Shimano_EP801_600.de.en_2.pdf?v=1762246005\" class=\"btn\"\u003e INSTALLATION GUIDE PDF\u003c\/a\u003e\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/8e103d175b9e43a79067c871de4f408f.mp4\" target=\"_blank\" class=\"btn\"\u003eProgramming video\u003c\/a\u003e\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of MBIQ-P products. Electric bikes equipped with MBIQ-P products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with MBIQ-P products can be used exclusively on private property and entirely at one’s own risk. The use of MBIQ-P products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nMBIQ-P products are thoroughly tested and we stand by their quality - MBIQ-P provides 2 years warranty to all their products.","brand":"MBIQ-P","offers":[{"title":"Default Title","offer_id":56231734968694,"sku":"TWE-MBIQ-P-EP801","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/520ce58952500f4df6c6df8904d1d97b8c9167c7.jpg?v=1757321221"},{"product_id":"peartune-3-0-for-shimano-ep8-still-on-version","title":"PearTune 3.0 for Shimano EP8 without Di2 Still On Version","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThis Peartune tuning kit removes the 16mph (25km\/h) speed limit, allowing the motor to help you at higher speeds. For these Shimano bikes, the speed limit is raised to \u003cb\u003e31mph (50km\/h).\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eReal speed will be displayed up to 14-15mph (21-25km\/h), at higher speeds the bike will show incorrect, slower than real speeds. \u003c\/b\u003e\n\n\u003ch3\u003eHow does the Peartune work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:\n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe tuning kit is designed to automatically activate when the eBike is powered on. When PearTune is active - you will be able to ride at a speed of 25 mph (40 km\/h) and even up to 31 mph (50 km\/h)!\n\u003cbr\u003e\u003cbr\u003e\n\nNOTE 1: Real speed will be displayed up to 14-15mph (21-25km\/h), at higher speeds the bike will show incorrect, slower than real speeds.\n\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eIs this Peartune the right tuning kit for my bike?\u003c\/h3\u003e\nThis Peartune tuning kit is made to fit all Shimano EP8 and EP8-RS motors without Di2, with all Shimano displays made for EP8 motors. Not compatible with Shimano EP801!\n\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eNot Compatible\u003c\/b\u003e with Shimano E8000 \/ E7000 \/ E5000. You would need \u003cb\u003e\u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/e-bike-e-mtb-tuning-kit-peartune-mso-3-0-for-shimano-e8000-e6100-e6010-e6012-e5000-e7000-2018-2022\" target=\"_blank\"\u003ePeatune for Shimano E8000 \/ E7000 \/ E5000.\u003c\/a\u003e\u003c\/b\u003e\nNot Compatible with Shimano EP801. You would need \u003ca href=\"https:\/\/www.twowheelsempire.com\/products\/peartune-3-0-tuning-kit-for-shimano-ep801-and-ep6-motors\" target=\"_blank\"\u003ePearTune 3.0 for Shimano EP801\/EP6\u003c\/a\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nThe MSO can be activated or deactivated anytime using the bike menu's light control function. Refer to the bike manual for detailed instructions. If the lights are ON, PearTune MSO is OFF. When the lights are OFF, PearTune MSO is ON. If you disconnect the red power cable, PearTune MSO will be \"always ON,\" meaning it will activate automatically when you switch on your bike. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\u003cbr\u003e\nIf you are planning to install PearTune on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/MANUAL_-_Shimano_Panasonic_Bafang_UART_EN.pdf?v=1671527612\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF\u003c\/a\u003e\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides 2 years warranty to all their products.\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides Lifetime warranty to all their products.","brand":"PearTune","offers":[{"title":"Default Title","offer_id":58112743407990,"sku":"PT-MSO-3.0-SH-EP8-X","price":219.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/7839-1_peartune-mso-3-0-still-on--shimano-ep8.webp?v=1781780673"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/collections\/Shimano_Ep8_2cc5c8e6-9a5c-4291-90f9-39279f301c56.jpg?v=1694676470","url":"https:\/\/www.twowheelsempire.com\/en-lt\/collections\/shimano-motor-e-bike-tuning-kits.oembed","provider":"Two Wheels Empire","version":"1.0","type":"link"}