{"title":"Speedfun E-Bike Tuning Kits","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSpeedFun is an Italian company that provides the widest range of e-bike tuning devices designed to unlock most engine brands and models.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHere's why eBike lovers are so fond of SpeedFun:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEffortless Installation: Their tuning kits are designed for a seamless \"plug \u0026amp; ride\" experience.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWarranty Assurance: Enjoy peace of mind with a 1-year warranty.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e\u003cspan\u003e Easily find the kit you need by filtering based on your specific motor type.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eKey differences between Speedfun tuning kit types:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp class=\"break-words\"\u003e\u003cstrong\u003eRibbele\u003c\/strong\u003e - shows real speed data on the display or app. More expensive than other models in the Furious Evo line. Features an easier method for tuning kit activation and deactivation, typically done via buttons on the display or handlebar control.\u003c\/p\u003e\n\u003cp class=\"break-words\"\u003e\u003cstrong\u003eFurious Evo\u003c\/strong\u003e - does not show real speed data on the display or app. Cheaper than the Ribbele line. Activation and deactivation of the tuning kit are done by lifting the rear wheel of your e-bike and spinning it with a strong pedal.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"speedfun-for-fazua","title":"SpeedFun Furious for Fazua Ride 50","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun FURIOUS for Fazua Ride 50 is a revolutionary tuning kit which suppresses the speed limiter of your electric bike. \n\u003cbr\u003e\u003cbr\u003e\nAfter installing your SpeedFun, your e-bike’s display will show real data up to 12mph (20km\/h) - at higher speeds, the display will show half speed and relative data making it possible, by simply multiplying in mind by two, the calculation of the actual speed and miles or kilometers traveled. \n\u003cbr\u003e\u003cbr\u003e\nThe motor's electric assistance switches off when reaching 30mph (50km\/h).\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choise, you do not need to do it everytime you turn On ebike. \n\u003cbr\u003e\u003cbr\u003e\nActivation and deactivation:\u003cbr\u003e\n- Turn the ebike off and on again. Do not move it or do other operations.\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal with the longest (hardest) gear engaged.\u003cbr\u003e\n- Let it run for a few seconds.\u003cbr\u003e\n- The system recognizes the acceleration and considers it as an activation or deactivation command (cyclically). Upon activation, the display shows the speed that change from real to halved in the manner described above. When deactivated, the display shows the speed change from halved to real and the bike returns to its original state.\n\n\u003ch3\u003eWhich SpeedFun Tuning Kit do I need?\u003c\/h3\u003e\nThis tuning kit is compatible with eBikes that have \u003cb\u003eFazua Ride 50 Motor\u003c\/b\u003e. And it works with any type of display.\n\u003cbr\u003e\u003cbr\u003e\nATTENTION!\u003cbr\u003e\nThis device is not compatible with Fazua Ride 60 motors. The product compatible with Fazua Ride 60 motors is available \u003ca href=\"\/en-lt\/products\/speedfun-furious-evo-easy-for-fazua-ride-60\"\u003eHere\u003c\/a\u003e\n\u003cbr\u003e\u003cbr\u003e\nEbike with Fazua Ride 50 motors where the Tuning Kit was successfully installed and tested:\u003cbr\u003e\n- Pinarello Nytro E-Road Bike\u003cbr\u003e\n- Lombardo E-Mugello Road\u003cbr\u003e\n- Cube Agree Hybrid C:62\u003cbr\u003e\n- Whistle Flow, Bianchi E-Doardo\u003cbr\u003e\n- Fantic Passo Giau\u003cbr\u003e\n- Focus Project Y\u003cbr\u003e\n- Maserati MC Corse\u003cbr\u003e\n- Atala E-Road Flow\u003cbr\u003e\n- Bottecchia BE 90 Pulsar E-Road carbon\u003cbr\u003e\n- Focus Raven 2\u003cbr\u003e\n- Whistle E-Road Flow\u003cbr\u003e\n- Cairn e-bike \u003cbr\u003e\n- Focus Paralane² e-road and Boardman ADV 8.9E Adventure Electric Bike.\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/FURIOUS-EVO-FAZUA-IT-EN-FR_compressed.pdf?v=1672836078\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/gS3NuD4Eyfs\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Fazua + container lid","offer_id":39290868826246,"sku":"TWE-SF-F+TWE-SF-F-C","price":159.0,"currency_code":"EUR","in_stock":true},{"title":"Fazua Tuning kit","offer_id":39290868859014,"sku":"TWE-SF-F","price":139.0,"currency_code":"EUR","in_stock":true},{"title":"Container Lid","offer_id":39338071949446,"sku":"TWE-SF-F-C","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/speedfun-furious-for-fazua-ride-50-twe-sf-f-1145467749.png?v=1741936461"},{"product_id":"speedfun-ghost-ebikemotion-x35-tuning-derestriction-kit-ebike-motor","title":"SpeedFun Ghost for Mahle Ebikemotion X35 and X35+","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nAfter the Tuning kit is installed - factory speed limit is removed! Due to the constructive characteristics of this type of motor it is possible to reach around 18\/19mph (29\/30 km\/h) depending on the ebike model and gearing.\n\u003cbr\u003e\u003cbr\u003e\nThe tuning kit for Ebikemotion X35 will be active right away after installation. If you do use app or display with your ebike, you will not be able to see real data. Assistance is slightly reduced beyond 16mph (25kmh).\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nThe tuning kit for Ebikemotion X35 will be active right away after installation. If you do use app or display with your ebike, you will not be able to see real data. Assistance is slightly reduced beyond 16mph (25kmh).\n\u003cbr\u003e\u003cbr\u003e\nAfter installing your SpeedFun, due to the constructive characteristics of this type of motor it is possible to reach around 18\/19mph (29\/30 km\/h) depending on the ebike model and gearing.\n\n\u003ch3\u003eWhich SpeedFun Tuning Kit do I need?\u003c\/h3\u003e\nThe Chip for Ebikemotion x35 SpeedFun Ghost is available in only one version:\u003cbr\u003e\n- Slim Version: this round section version measures ∅14 x 170 mm and is slightly flexible. It can be inserted partially or totally inside the tubes in the frame or be fixed externally. Before buying, please check the size on your ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eTuning kit was testes with these ebike models:\u003c\/b\u003e\u003cbr\u003e \n- Orbea Gain\u003cbr\u003e \n- Orbea Vibe H10, H10 Mud e H10 EQ\u003cbr\u003e \n- Orbea Vibe H30, Vibe H30, H30 Mud e H30 EQ\u003cbr\u003e \n- Olmo e.vento sport\u003cbr\u003e \n- SuperSix EVO Neo 3\u003cbr\u003e \n- Bianchi Aria\u003cbr\u003e \n- SuperSix EVO Neo 3\u003cbr\u003e \n- Bianchi Aria E-Road (to install the device you need to remove the cover that goes from the battery to the engine) \u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eKnown ebike models that have X35 motor:\u003c\/b\u003e\u003cbr\u003e\nARGON 18 Subito E-Gravel, \nARGON 18 Subito E-Road, \nASFALT GT2 Lounge Heritage, \nASFALT GT2 Lounge Urban, \nASFALT GT2 Sports Heritage, \nASFALT GT2 Sport Urban, \nBERGAMONT e-Sweep Sport, \nBERGAMONT e-Sweep Tour, \nBIANCHI e-Impulso Gravel, \nBIANCHI Aria e-Road, \nBIANCHI e-Impulso Road, \nBIXS District-E10, \nBIXS District-E20, \nBTWIN City Speed 900E, \nCANNONDALE Tesoro Neo SL, \nCANNONDALE Topstone Neo SL 1, \nCANNONDALE Treadwell Neo, \nCANNONDALE Quick Neo SL 1, \nCANNONDALE Quick Neo SL 1 Remixte, \nCANNONDALE Quick Neo SL 2, \nCINELLI Zydeco E-Mud, \nCYCLIK e-Relief, \nCYCLIK e-Relief 2, \nDESIKNIO Dopamine, \nDESIKNIO Serotonin, \nGT eGrade Bolt, \nGT eGrade Current, \nHOHEACHT LUMO Tereno Trapez, \nHOHEACHT LUMO Terra Diamant, \nHOHEACHT LUMO Terra Trapez, \nHOHEACHT LUMO Ripio, \nHOHEACHT LUMO Ripinio, \nKONRAD BIKES Urban Active, \nKONRAD BIKES Urban Comfort, \nKONRAD BIKES Urban Gravel, \nKONRAD BIKES Urban Tour, \nLAPIERRE e-Sensium 2.2, \nLAPIERRE e-Shaper 3.2, \nLEMOND Dutch, \nLEMOND Prolog, \nLOGO XD02, \nMERIDA eScultura 400, \nMERIDA eSilex, \nMERIDA eSpeeder, \nMERIDA eSpresso Urban, \nMILANO Agape, \nMILANO Pyt, \nMILANO Saudade, \nMILANO Sonder, \nMONDRAKER F-Play 24, \nMONDRAKER F-Play 26, \nMONDRAKER Play 20, \nMONDRAKER Play 24, \nMONDRAKER Play 26, \nMONOPOLE No. 1, \nMÖVE Airy, \nMÖVE Urban: Airy, \nMMR Tempo, \nMTB CYCLETECH Souplesse GP, \nMTB CYCLETECH Souplesse Lady, \nMTB CYCLETECH Souplesse Man, \nMV AGUSTA Amo R, \nMV AGUSTA Amo R11, \nMV AGUSTA Amo RR, \nMV AGUSTA Amo RR9, \nMV AGUSTA Amo RR10, \nMV AGUSTA AMO XT6, \nMV AGUSTA Cortina Edizione Limitata, \nMV AGUSTA SV Edizione Limitata, \nNEOWISE F3 Comet, \nORBEA Gain, \nORBEA Optima, \nORBEA Vibe, \nPRINCIPIA E-Gravel, \nRALEIGH Trace Electric, \nRIBBLE Endurance SL e-Hero, \nRIBBLE GRAVEL AL E, \nRIBBLE CGR AL e, \nRIBBLE Endurance SL e, \nRIBBLE Hybrid AL e Series, \nROSE Backroad Al Plus, \nROSE Sneak Plus, \nSALSA Confluence, \nSOUL CYCLES E-Spry Gravel, \nSOUL CYCLES E-Spry Sport, \nVAN RYSEL E-EDR AF, \nVAN RYSEL E-EDR AF WMN, \nVAN RYSEL E-GRVL AF HD, \nWILIER TRIESTINA Garda Hybrid, \nWINORA E-Flitzer, \nWILIER TRIESTINA Jena Hybrid, \nWILIER TRIESTINA Cento1 Hybrid\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\n\u003cb\u003eFollow these steps for the installation:\u003c\/b\u003e\u003cbr\u003e\n1. Remove the zip tie holding the connector cable.\u003cbr\u003e\n2. Unplug the connector. *DO NOT ROTATE THE CABLE WHILE UNPLUGGING*\u003cbr\u003e\n3. Slide the female connector wire into the frame (9-10cm.)\u003cbr\u003e\n4. Connect the Ghost tuning kit as shown. *PAY ATTENTION TO THE ARROWS*\u003cbr\u003e\n5. Secure the tuning kit using zip tie.\n\u003cbr\u003e\u003cbr\u003e\nIf you are planning to install SpeedFun on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the chip is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Instructions-Ghost-X35-bikemotion.pdf?v=1672909289\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF\u003c\/a\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/VmKz97EKI-I\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":39431229997190,"sku":"TWE-SF-GH","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/speedfun-ghost-for-mahle-ebikemotion-x35-and-x35-twe-sf-gh-1145468168.png?v=1741936415"},{"product_id":"speedfun-furious-evo-easy-per-brose-1","title":"SpeedFun Furious Evo Easy per Brose","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun FURIOUS for Brose is a revolutionary tuning kit which suppresses the speed limiter of your electric bike. \n\u003cbr\u003e\u003cbr\u003e\nAfter installing your SpeedFun, your e-bike’s display will show real data up to 12mph (20km\/h) - at higher speeds, the display will show half speed and relative data making it possible, by simply multiplying in mind by two, the calculation of the actual speed and miles or kilometers traveled.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. Maximum speeds of ~30mph (50km\/h) or even faster can be expected, depending on the bike and gearing.\n\u003cbr\u003e\u003cbr\u003e\nYou can choose the 'On\/Off' or 'Easy' tuning kit: \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003e'On\/Off' option\u003c\/b\u003e - The chip can be activated or deactivated anytime during the ride by pressing LIGHT BUTTON.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003e'Easy' option\u003c\/b\u003e - The chip is activated automatically when you turn your e-bike on.\n\n\u003ch3\u003eWhich SpeedFun Tuning Kit do I need?\u003c\/h3\u003e\nThis tuning kit can be installed on ebike with Brose in aluminum (Brose C, Brose T, Brose TF, Brose S) or with Brose motors in magnesium (Brose S Mag) and Continental motors.\n\u003cbr\u003e\u003cbr\u003e\nMostly mounted on ebike Axevo, Bergstrom, Besv, BH, Bikel, BMW, Bulls, Campus, Cheetah, Cucuma, Devinci, Diavelo, Douze Cycles, e-Framer, Elops, Fantic, Fischer, FXX Cycles, Head, Hercules, Innata, Kraft Stoff, Leaos, LeeCougan, Olmo, Olympia, M1 Sport Technik, Maxx, Nox Cycles, Neomuv, NSR, Pedal Power, Pedego, Pininfarina, Poison, Pragma Industries, QWIC, Rockrider (Decathlon), Rotwild, Sblocs, Specialized, Sunn, Triobike, VKT regardless of the type of display or side control of the ebike.\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nInstallation PDF:\u003cbr\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/FURIOUS-EVO-EASY-BROSE-IT-EN-FR_compressed.pdf?v=1739170987\"\u003e Easy version Install PDF\u003c\/a\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/FURIOUS-EVO-LUCI-BROSE-IT-EN-FR_compressed.pdf?v=1739170986\"\u003eOn\/Off version Install PDF\u003c\/a\u003e\u003cbr\u003e\n\n\u003cspan class=\"text-center\"\u003eInstallation video for Specialized Turbo Levo, Kenevo, Tero, Vado and Como\u003c\/span\u003e \n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/9MIor-n5s7w\" frameborder=\"0\" allowfullscreen=\"\" loading=\"lazy\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cspan class=\"text-center\"\u003eFor Brose S-Mag motors\u003c\/span\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/FahO7NdxtJk\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cspan class=\"text-center\"\u003eFor Specialized Turbo Levo\u003c\/span\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/-g4Wxt85Fh0\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"On\/Off","offer_id":40068586897542,"sku":"TWE-SF-F-LUCI","price":139.0,"currency_code":"EUR","in_stock":true},{"title":"Easy","offer_id":55245175685494,"sku":"TWE-SF-F-EASY","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-per-brose-twe-sf-f-easy-1145465413.jpg?v=1741936411"},{"product_id":"speedfun-furious-evo-easy-for-fazua-ride-60","title":"SpeedFun FURIOUS Evo easy+ for Fazua Ride 60","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun FURIOUS for Fazua is a revolutionary tuning kit which suppresses the speed limiter of your electric bike. \n\u003cbr\u003e\u003cbr\u003e\nAfter installing your SpeedFun, your e-bike’s display will show real data up to 12mph (20km\/h) - at higher speeds, the display will show half speed and relative data making it possible, by simply multiplying in mind by two, the calculation of the actual speed and miles or kilometers traveled. \n\u003cbr\u003e\u003cbr\u003e\nThe motor's electric assistance switches off when reaching 37mph (60km\/h).\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- If you want to be able to activate \/ deactivate the tuning kit, it is necessary to cut\/interrupt the blue wire in the shape of a slot that comes out of the black plastic body of the device.\u003cbr\u003e\nNB: secure the ends of the blue wire with electrician's tape to avoid unwanted contact.\n- Once this operation has been carried out, the speed release can be activated and deactivated once you need it. \u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\nActivation and Deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 18mph (30 km\/h) for a few seconds.\n\u003cbr\u003e\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eWhich SpeedFun Tuning Kit do I need?\u003c\/h3\u003e\nSpeedFun Furious Evo can be installed on e-bikes equipped with the Fazua Ride 60 system both with Fazua led HUB + Ring Control and with Fazua Control HUB mostly mounted on Riese and Muller, Canyon, Transition Bikes, Pivot Cycles, Wilier and Haibike Lyke. \n\u003cbr\u003e\u003cbr\u003e\nEbike with Fazua ride 60 system where the Furious Evo device has been successfully installed:\u003cbr\u003e\n– Canyon Roadlite:ON 8 LTD\u003cbr\u003e\n– Canyon Commuter:ON 8 LTD\u003cbr\u003e\n– Canyon Commuter:ON 8 LTD mid-step\u003cbr\u003e\n– Pivot Shuttle SL\u003cbr\u003e\n– Giant UBN Seven\u003cbr\u003e\n– Giant UBN Five\u003cbr\u003e\n– Wilier ultra hybrid\u003cbr\u003e\n– Haibike Lyke\u003cbr\u003e\n– Focus Jam2 SL\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/FURIOUS-EVO-EASY-FAZUA-Ride-60-IT-EN-FR.pdf?v=1672838903\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/gS3NuD4Eyfs\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Fazua Tuning kit","offer_id":40064637141126,"sku":"TWE-SF-F-R60","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/speedfun-furious-evo-easy-for-fazua-ride-60-twe-sf-f-r60-1145467953.jpg?v=1741936152"},{"product_id":"speedfun-furious-evo-easy-for-bosch-smart-system","title":"SpeedFun Furious Evo easy+ for Bosch Smart System","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\n\u003cp\u003eTuning module for the Bosch Smart System. Compatible with all Bosch drive systems that are equipped with the Smart System and whose motor support ends at 25km\/h (15.5mph) from the factory. Note: Bikes with rim magnet and ABS systems are not supported\u003c\/p\u003e\n\u003ch3\u003eHow does Speedfun work?\u003c\/h3\u003e\n\u003cp\u003eThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003eSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km] \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eActivation:\u003c\/b\u003e\u003cbr\u003e- Turn Off the ebike.\u003cbr\u003e- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e- Position the left pedal at 11:00. From now on, do not turn the rear wheel.\u003cbr\u003e- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003eThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition. \u003cbr\u003e\u003cbr\u003ePlease disable automatic updates in the eBike Flow App. And do not us flow app together with tuning kit.\u003c\/p\u003e\n\u003ch3\u003eIs this the tuning kit that I need?\u003c\/h3\u003e\n\u003cp\u003eThis tuning kit is compatible with Bosch Smart System. Bikes equipped with a rim magnet are not supported by the tuning. Not compatible with with e-bikes with Bosch ABS system as well. This device is not compatible with ebikes equipped with a GPS system (Bosch ConnectModule). The Smart System is most easily identified by the Intuvia 100 or Kiox 300 display type or the LED Remote control unit or the system controller.\u003c\/p\u003e\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\n\u003cp\u003eWhen connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us. If you are planning to install Speedfun on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-Bosch-Smart-System-IT-EN-FR_compressed.pdf?v=1709728451\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF \u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom: 56.25%; position: relative; display: block; width: 100%;\"\u003e\u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/H8xueWHvrSg?si=D-ONmXpt0_zFuGSV\" style=\"position: absolute; top: 0; left: 0;\"\u003e\n    \u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\n\u003cp\u003ePlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use Speedfun products. Electric bikes equipped with Speedfun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Speedfun products can be used exclusively on private property and entirely at one’s own risk. The use of Speedfun may void the warranty of your ebike. \u003cbr\u003e\u003cbr\u003eWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds. \u003cbr\u003eSpeedfun Products are thoroughly tested and we stand by their quality. Speedfun provide 1 year warranty to all their Products!\u003c\/p\u003e","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":40638888345734,"sku":"TWE-SF-B-SM","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-bosch-smart-system-twe-sf-b-sm-1145465351.jpg?v=1741935722"},{"product_id":"speedfun-furious-evo-f-easy-for-giant-syncdrive-core-life-pro-and-sport","title":"SpeedFun Furious Evo F easy+ for Giant Syncdrive Core, Life, Pro and Sport","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo F tuning device for Giant Syncdrive Core, Life, Pro and Sport (PW-X2) is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, having no communication with the display, it will show the altered data on the display starting from a certain threshold.\n\n\u003ch3\u003eHow does Speedfun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to\npedaling speed. This ensures smooth motor control without interruptions from speed limits.\nHowever, the achievable speed largely depends on the eBike model. The achievable speed can be calculated using a simple formula:\n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1,000,000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\nThe tuning kit can be activated directly on your bike’s controllers. After pressing the activation\nbuttons, you will be able to ride at speeds of 25 mph (40 km\/h), 31 mph (50 km\/h), and even\nmore than 37 mph (60 km\/h).\n\u003cbr\u003e\u003cbr\u003e\n\nSpeedFun Furious Evo F can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with Giant Syncdrive Core, Life, Pro and Sport (PW-X2) motors regardless of the type of display or side control of the ebike.\n\u003cbr\u003e\u003cbr\u003e\nThe Furious Evo F tuning device for Giant Giant Syncdrive Core, Life, Pro and Sport (PW-X2) can be activated\/deactivated in a very practical system (for more information see the instructions). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.\n\n\u003ch3\u003eWhich Speedfun Tuning Kit do I need?\u003c\/h3\u003e\n\u003cb\u003eCompatible with motor: \u003c\/b\u003eGiant SyncDrive Sport \/ Pro \/ Life \/ Core drive systems from model year 2017 with any display and handlebar control\n\u003cbr\u003e\u003cbr\u003e\nTested bike models:\u003cbr\u003e\n– Giant AnyTour E+ 3 GTS\u003cbr\u003e\n– Giant AnyTour E+ 3 LDS\u003cbr\u003e\n– Giant Fathom E+ Pro\u003cbr\u003e\n– Giant Fathom E+\u003cbr\u003e\n– Giant Talon E+\u003cbr\u003e\n– Giant Stance E+\u003cbr\u003e\n– Giant Reign E+\u003cbr\u003e\n– Giant Fathom E+ Pro 29\u003cbr\u003e\n– Giant Fathom E+ 29\u003cbr\u003e\n– Giant Talon E+ 29\u003cbr\u003e\n– Giant Trance X E+ Pro 29\u003cbr\u003e\n– Giant Stance E+\u003cbr\u003e\n– Giant Explore E+\u003cbr\u003e\n– Giant Roam E+\u003cbr\u003e\n– Giant Explore E+ Pro\u003cbr\u003e\n– Giant Explore E+\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting the Speedfun tuning kit to an e-bike, you will find matching connectors to\nmake the installation very simple. Below you will find a detailed guide how to install the tuning kit\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-F-Easy-PWX2-GIANT-IT-EN-FR_compressed.pdf?v=1723106480\" class=\"btn\" target=\"_blank\"\u003e\nInstallation guide PDF\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/Phsd-jZcFhw?si=03qs7nXblLPgp5UZ\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant Legal Note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use Speedfun products. Electric bikes equipped with Speedfun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Speedfun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of Speedfun may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nSpeedfun products are thoroughly tested and we stand by their quality. Speedfun provides 1 year warranty to all their Products!\n\u003cbr\u003e\u003cbr\u003e\nIf You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":41281443397766,"sku":"TWE-SF-G-CORE","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-f-easy-for-giant-syncdrive-core-life-pro-and-sport-twe-sf-g-core-1145466399.jpg?v=1741935581"},{"product_id":"speedfun-furious-evo-f-easy-for-giant-syncdrive-pro-2-and-syncdrive-sport-2","title":"SpeedFun Furious Evo F easy+ for Giant Syncdrive Pro 2 and Syncdrive Sport 2 and Pro3","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo F tuning device for Giant Syncdrive Pro 2,Pro3 and Syncdrive Sport 2 (motor Yamaha PW-X3) is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs \n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, having no communication with the display, it will show the altered data on the display starting from a certain threshold.\n\n\u003ch3\u003eHow does Speedfun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to\npedaling speed. This ensures smooth motor control without interruptions from speed limits.\nHowever, the achievable speed largely depends on the eBike model. The achievable speed can be calculated using a simple formula:\n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1,000,000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe tuning kit can be activated directly on your bike’s controllers. After pressing the activation\nbuttons, you will be able to ride at speeds of 25 mph (40 km\/h), 31 mph (50 km\/h), and even\nmore than 37 mph (60 km\/h).\n\u003cbr\u003e\u003cbr\u003e\n\nSpeedFun Furious Evo F can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with Giant Syncdrive Pro 2, Pro3 and Syncdrive Sport 2 motors regardless of the type of display or side control of the ebike.\n\u003cbr\u003e\u003cbr\u003e\nThe Furious Evo F tuning device for Giant Syncdrive Pro 2 and Syncdrive Sport 2 can be activated\/deactivated in a very practical system (for more information see the instructions). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eWhich Speedfun Tuning Kit do I need?\u003c\/h3\u003e\n\u003cb\u003eCompatible with motor: \u003c\/b\u003eGiant Syncdrive Pro 2 and Syncdrive Sport 2, Pro3 drive systems with any display and handlebar control\n\u003cbr\u003e\u003cbr\u003e\nTested bike models:\u003cbr\u003e\n– Giant Reign E+ 0\u003cbr\u003e\n– Giant Reign E+ 1\u003cbr\u003e\n– Giant Trance X E+ 1\u003cbr\u003e\n– Giant Trance X E+ 2\u003cbr\u003e\n– Giant Trance X Advance E+ 1\u003cbr\u003e\n– Giant Trance X Advance E+ 2\u003cbr\u003e\n– Giant Explore E+ Pro 0 GTS\u003cbr\u003e\n– Giant Explore E+ Pro STA\u003cbr\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting the Speedfun tuning kit to an e-bike, you will find matching connectors to\nmake the installation very simple. Below you will find a detailed guide how to install the tuning kit\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-F-Easy-PWX3-GIANT-IT-EN-FR_compressed.pdf?v=1723116034\" class=\"btn\" target=\"_blank\"\u003e\nInstallation guide PDF\n\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant Legal Note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use Speedfun products. Electric bikes equipped with Speedfun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Speedfun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of Speedfun may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nSpeedfun products are thoroughly tested and we stand by their quality. Speedfun provides 1 year warranty to all their Products!\n\u003cbr\u003e\u003cbr\u003e\nIf You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":41281845756038,"sku":"TWE-SF-G-PRO2","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-f-easy-for-giant-syncdrive-pro-2-and-syncdrive-sport-2-twe-sf-g-pro2-1145466392.jpg?v=1741935578"},{"product_id":"speedfun-furious-evo-easy-for-bosch-smart-system-with-rim-magnet","title":"SpeedFun Furious Evo easy+ for Bosch Performance Line CX, Race CX (gen. 4) Smart System with Rim Magnet","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Furious Evo easy + is a tuning for ebike equipped with a Bosch Smart System motor that allows you to remove the 25 km\/h speed block.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line CX (Gen 4 BES3) motors equipped with a magnet on the valve (Bosch Rim Magnet) regardless of the display or handlebar control.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line CX and Performance Line CX Race Limited Edition (gen.4 BES3) motors equipped with a magnet on the valve (Bosch Rim Magnet) with LED Remote\/System Controller command (also compatible with Led Remote + Kiox 300\/500, Intuvia 100, Purion 400 or System Controller + Mini Remote) or Purion 200.\n\n\u003ch3\u003eHow does Speedfun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eActivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11:00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the tuning kit that I need?\u003c\/h3\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line CX and Performance Line CX Race Limited Edition (gen.4 BES3) motors equipped with a magnet on the valve (Bosch Rim Magnet) with LED Remote\/System Controller command (also compatible with Led Remote + Kiox 300\/500, Intuvia 100, Purion 400 or System Controller + Mini Remote) or Purion 200. \u003cb\u003eBosch Gen4 motor codes start with BDU37**\u003c\/b\u003e If your eBike has no Rim Magnet, then you need to choose a different product. This device is not compatible with ebikes equipped with a GPS system (Bosch ConnectModule).\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\nIf you are planning to install Speedfun on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-BOSCH-RIM-MAGNET-IT-EN-FR_compressed.pdf?v=1728299608\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF \u003c\/a\u003e \u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use Speedfun products. Electric bikes equipped with Speedfun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Speedfun  products can be used exclusively on private property and entirely at one’s own risk. The use of Speedfun may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\nSpeedfun Products are thoroughly tested and we stand by their quality. \nSpeedfun provide 1 year warranty to all their Products!","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":53525392884086,"sku":"TWE-SF-B-SM-RIM","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-bosch-performance-line-cx-gen-4-smart-system-with-rim-magnet-twe-sf-b-sm-rim-1145465792.jpg?v=1741935481"},{"product_id":"speedfun-furious-evo-easy-for-bosch-performance-line-cx-gen-5-smart-system-with-rim-magnet","title":"SpeedFun Furious Evo easy+ for Bosch Performance Line CX (gen. 5) Smart System with Rim Magnet","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Furious Evo easy + is a tuning for ebike equipped with a Bosch Smart System motor that allows you to remove the 25 km\/h speed block.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line CX (gen 5) motors equipped with a magnet on the valve (Bosch Rim Magnet) regardless of the display or handlebar control.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line CX (gen.5) motors equipped with a magnet on the valve (Bosch Rim Magnet) with LED Remote\/System Controller command (also compatible with Led Remote + Kiox 300\/500, Intuvia 100, Purion 400 or System Controller + Mini Remote) or Purion 200.\n\n\u003ch3\u003eHow does Speedfun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eActivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11:00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the tuning kit that I need?\u003c\/h3\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line CX (gen.5) motors equipped with a magnet on the valve (Bosch Rim Magnet) with LED Remote\/System Controller command (also compatible with Led Remote + Kiox 300\/500, Intuvia 100, Purion 400 or System Controller + Mini Remote) or Purion 200. \u003cb\u003eBosch Gen5 motor codes start with BDU38**\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo is supplied ready to use, plug and go, can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed easily thanks to the compatible connectors. This device is not compatible with ebikes equipped with a GPS system (Bosch ConnectModule).\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\nIf you are planning to install Speedfun on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-BOSCH-RIM-MAGNET-CX-Gen-5-IT-EN-FR_compressed_20da4d8e-4a0c-4d8a-91ce-ef455695145c.pdf?v=1739253800\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF \u003c\/a\u003e \u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use Speedfun products. Electric bikes equipped with Speedfun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Speedfun  products can be used exclusively on private property and entirely at one’s own risk. The use of Speedfun may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\nSpeedfun Products are thoroughly tested and we stand by their quality. \nSpeedfun provide 1 year warranty to all their Products!","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":54829517701494,"sku":"TWE-SF-B-SM-CX-GEN5-RIM","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-bosch-performance-line-cx-gen-4-smart-system-with-rim-magnet-twe-sf-b-sm-rim-1145465792.jpg?v=1741935481"},{"product_id":"speedfun-furious-evo-easy-for-bosch-performance-line-sx-gen-4-smart-system-with-rim-magnet","title":"SpeedFun Furious Evo easy+ for Bosch Performance Line SX (gen. 4) Smart System with Rim Magnet","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Furious Evo easy + is a tuning for ebike equipped with a Bosch Smart System motor that allows you to remove the 25 km\/h speed block.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line SX (gen.4) motors equipped with a magnet on the valve (Bosch Rim Magnet) with LED Remote\/System Controller command (also compatible with Led Remote + Kiox 300\/500, Intuvia 100, Purion 400 or System Controller + Mini Remote) or Purion 200.\n\n\u003ch3\u003eHow does Speedfun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eActivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11:00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the tuning kit that I need?\u003c\/h3\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line SX (gen.4) motors equipped with a magnet on the valve (Bosch Rim Magnet) with LED Remote\/System Controller command (also compatible with Led Remote + Kiox 300\/500, Intuvia 100, Purion 400 or System Controller + Mini Remote) or Purion 200.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eATTENTION!\u003c\/b\u003e\u003cbr\u003e\nThis device is not compatible with ebikes equipped with a “classic” magnet on the spokes or brake disc. \u003cbr\u003e\nThis device is not compatible with ebikes equipped with the Bosch ABS system.\u003cbr\u003e\nThis device is not compatible with ebikes equipped with a GPS system (Bosch ConnectModule).\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\nIf you are planning to install Speedfun on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-BOSCH-RIM-MAGNET-SX-ALTO-IT-EN-FR_compressed.pdf?v=1732777646\" target=\"_blank\"\u003eInstallation instruction for motors with top attachments (BDU3142 and BDU3143) \u003c\/a\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-BOSCH-RIM-MAGNET-SX-DIAGONALE-IT-EN-FR_compressed.pdf?v=1732777739\" target=\"_blank\"\u003eInstallation and use instruction for motors with diagonal attachments (BDU3144 and BDU3145)\u003c\/a\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use Speedfun products. Electric bikes equipped with Speedfun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Speedfun  products can be used exclusively on private property and entirely at one’s own risk. The use of Speedfun may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\nSpeedfun Products are thoroughly tested and we stand by their quality. \nSpeedfun provide 1 year warranty to all their Products!","brand":"SpeedFun","offers":[{"title":"BDU3142","offer_id":54830812561782,"sku":"TWE-SF-B-SM-SX-BDU3142-BDU3143-RIM","price":249.0,"currency_code":"EUR","in_stock":true},{"title":"BDU3143","offer_id":54830812594550,"sku":"TWE-SF-B-SM-SX-BDU3142-BDU3143-RIM-2","price":249.0,"currency_code":"EUR","in_stock":true},{"title":"BDU3144","offer_id":54830812627318,"sku":"TWE-SF-B-SM-SX-BDU3144-BDU3145-RIM","price":249.0,"currency_code":"EUR","in_stock":true},{"title":"BDU3145","offer_id":54830812660086,"sku":"TWE-SF-B-SM-SX-BDU3144-BDU3145-RIM-2","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-bosch-performance-line-cx-gen-4-smart-system-with-rim-magnet-twe-sf-b-sm-rim-1145465792.jpg?v=1741935481"},{"product_id":"speedfun-furious-evo-easy-for-rocky-mountain-dyname-4-0","title":"SpeedFun Furious Evo Easy+ for Rocky Mountain Dyname 4.0","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Furious Evo easy+ for Rocky Mountain Dyname 4.0 is a revolutionary tuning kit which suppresses the speed limiter of your electric bike. \n\u003cbr\u003e\u003cbr\u003e\nWhen the device is active, the display will show the exact speed up to the threshold of approximately 15 KmH, beyond which a manipulated speed will always be shown below 25 KmH.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. Maximum speeds of ~30mph (50km\/h) or even faster can be expected, depending on the bike and gearing.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eWhich SpeedFun Tuning Kit do I need?\u003c\/h3\u003e\nThis speed unlocker is compatible with Rocky Mountain Dyname 4.0 motors from 2022 equipped with a 720Wh Powerplay battery and Jumbotron display. \u003cbr\u003e\u003cbr\u003e\nEbike with Rocky Mountain Dyname 4.0 motor where the Furious Evo easy+ device has been successfully installed (this list is illustrative and not exhaustive)\u003cbr\u003e\u003cbr\u003e\n\n– Altitude Powerplay Carbon 90 Rally Edition\u003cbr\u003e\n�� Altitude Powerplay Carbon 70\u003cbr\u003e\n– Altitude Powerplay Alloy 70\u003cbr\u003e\n– Altitude Powerplay Alloy 50\u003cbr\u003e\n– Altitude Powerplay Alloy 30 Coil\u003cbr\u003e\n– Instinct Powerplay Carbon 90\u003cbr\u003e\n– Instinct Powerplay Carbon 70\u003cbr\u003e\n– Instinct Powerplay Alloy 70\u003cbr\u003e\n– Instinct Powerplay Alloy 50\u003cbr\u003e\n– Instinct Powerplay Alloy 30\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us. If you are planning to install Speedfun on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-ROCKY-MOUNTAIN-DYNAME-4-IT-EN-FR_compressed.pdf?v=1736259142\" class=\"btn\" target=\"_blank\"\u003eInstallation guide PDF\u003c\/a\u003e\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55127440949622,"sku":"TWE-SF-RMD","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-rocky-mountain-dyname-4-0-twe-sf-rmd-1145465578.png?v=1741935438"},{"product_id":"speedfun-furious-evo-easy-for-ananda-m80-and-am80-agile","title":"SpeedFun Furious Evo easy+ for Ananda M80 and AM80 Agile (Gen.1)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo easy+ tuning device for Ananda M80 and Atala AM80 Agile (Gen. 1) motor is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a very high real speed with the motor active . The maximum speed limit will therefore be dictated by the motor power added to the power expressed by your legs\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nThis tuning is specifically designed for Ananda M80 and Atala AM80 Agile (Gen. 1) motors mounted mostly on Atala, Olympia, Nakamura (Intersport), Scrapper, Woodsun E-Reflex (Leclerc) ebikes. This tuning allows the active assistance to be increased up to speeds that can reach 60 km\/h, making full use of the motor.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eCompatible with:\u003c\/b\u003e\u003cbr\u003e\nMotors:\u003cbr\u003e\n- Ananda M80 BBTR Central Motor\u003cbr\u003e\n- Ananda M80 AGILE (Atala)\u003cbr\u003e\n- Nakamura M80\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eDisplay:\u003c\/b\u003e\u003cbr\u003e\n- Compatible with all display models\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNot Compatible with:\u003c\/b\u003e\nThis device is not compatible with Atala AM80 Agile (Gen. 2) motor. The product compatible with Atala AM80 Agile (Gen. 2) motor is available \u003ca href=\"products\/speedfun-furious-evo-for-ananda-m60-m81-m100-m230-motors\"\u003eHERE\u003c\/a\u003e\n\n\u003cbr\u003e\u003cbr\u003e\nE-bikes with Ananda M80 and Atala AM80 Agile (Gen. 1) motor where the Furious Evo easy+ device has been successfully installed: Atala Califfo ebike, Atala Clever 6.2 Lady e Clever 6.2 Man, Olympia Magnum man\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/FURIOUS-EVO-EASY-ANANDA-M80-IT-EN-FR_compressed.pdf?v=1741070718\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/e168Ov2453g?si=pdEReZc0PwyuD2mB\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55331480338806,"sku":"SF-AN-M80","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-ananda-m80-and-am80-agile-gen-1-sf-an-m80-1145465326.png?v=1741935413"},{"product_id":"speedfun-furious-evo-for-ananda-m60-m81-m100-m230-motors","title":"SpeedFun Furious Evo for Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a very high real speed with the motor active. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by your legs.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn the ebike off and on again. Do not move it or do other operations.\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal with the longest (hardest) gear engaged. Let it run for a few seconds.\u003cbr\u003e\n- The system recognizes the acceleration and considers it as an activation or deactivation command (cyclically). Upon activation, the display shows the speed that change from real to halved in the manner described above. When deactivated, the display shows the speed change from halved to real and the bike returns to its original state.\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nSpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebikes with Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) motors mounted mostly on Olympia ebikes (in this case often with the wording “Tuned by Olympia”) regardless of the type of display or side control of the ebike.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eCompatible with:\u003c\/b\u003e\u003cbr\u003e\nMotors:\u003cbr\u003e\n- Ananda M60 M81 M100 M230\u003cbr\u003e\n- Atala AM80 Agile (Gen. 2)\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eNot Compatible with:\u003c\/b\u003e\nThis device is not compatible with Atala AM80 Agile (Gen. 1) motor. The product compatible with Atala AM80 Agile (Gen. 1) motor is available \u003ca href=\"products\/speedfun-furious-evo-easy-for-ananda-m80-and-am80-agile\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\nE-bikes with Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) motors where the Furious Evo device was successfully installed:\u003cbr\u003e\n\u003cb\u003eAnanda M100 tuned by Olympia\u003c\/b\u003e\u003cbr\u003e\n– Olympia EX 900 and EX 900 Prime\u003cbr\u003e\n– Olympia Performer 900 and Performer 900 Prime\u003cbr\u003e\n– Olympia Mistral 900\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eAnanda M81 tuned by Olympia (100Nm)\u003c\/b\u003e\u003cbr\u003e\n– Olympia EX 900 Trail\u003cbr\u003e\n– Olympia Master 630 29″ or Master 630 26″\u003cbr\u003e\n– Olympia Explorer 630\u003cbr\u003e\n– Olympia Super Magnum man and Super Magnum comfort\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eOther ebikes M60 M81 M100 M230\u003c\/b\u003e\u003cbr\u003e\n– Nakamura Crossover XV\u003cbr\u003e\n– Puch E-Modern N7\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-ANANDA-M100-M81-IT-EN-FR_compressed.pdf?v=1741079040\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55335714292086,"sku":"SF-AN-M81","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-for-ananda-m60-m81-m100-m230-and-atala-am80-agile-gen-2-motors-sf-an-m81-1145465320.jpg?v=1741935411"},{"product_id":"speedfun-furious-evo-on-off-lights-for-askoll-ultra-c90a","title":"SpeedFun Furious Evo on\/off lights for Askoll Ultra C90A","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for Askoll Ultra C90A is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed that is always lower than 25 KmH in order to obtain a very high real speed with the motor active. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs.\n\u003cbr\u003e\nWhen the tuning device is active, since it has no communication with the display, it will show halved data on the display starting from a certain threshold.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\nThe Furious Evo tuning device for Askoll Ultra C90A can be activated\/deactivated by simply pressing the ebike light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate\/deactivate the tuning with a very practical system (for more information, see the instructions).\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nIt can be installed on ebikes with Askoll Ultra C90A motors, mostly installed on Focarini ebikes and many others, regardless of the type of display or side control of the ebike.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eCompatible with:\u003c\/b\u003e\u003cbr\u003e\n- Askoll Ultra C90A only\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-ASKOLL-ULTRA-C90A-IT-EN-FR_compressed.pdf?v=1741084532\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55335996522870,"sku":"SF-AS-UL-C90A","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-on-off-lights-for-askoll-ultra-c90a-sf-as-ul-c90a-1145465312.png?v=1741935409"},{"product_id":"speedfun-furious-evo-easy-for-bh-2exmag-and-bhz-by-seg-motors","title":"SpeedFun Furious Evo easy+ for BH 2EXMAG and BHZ by Seg motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for BH 2EXMAG and BHZ by Seg is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motr a speed always lower than 25 KmH in order to obtain a real speed with very high active engine. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs \n\u003cbr\u003e\nWhen the tuning device is active, since it has no communication with the display, it will show halved data on the display starting from a certain threshold.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).v\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nThis release device is specially designed for the BH 2EXMAG and BHZ by Seg motors used on BH iLynx Trail Carbon, BH iLynx Trail Carbon Pro, BH iLynx Race Carbon Pro, BH iLynx Race Carbon LT and BH Core Race Carbon regardless of the display or the handlebar control. \u003cbr\u003e\n\u003cb\u003eCompatible with:\u003c\/b\u003e\u003cbr\u003e\nBH 2EXMAG motors\u003cbr\u003e\nBHZ by Seg motors \u003cbr\u003e\u003cbr\u003e\nE-bike with BH 2EXMAG and BHZ by Seg engines where the Furious Evo easy+ device has been successfully installed (this list is illustrative and not exhaustive)\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eBH 2EXMAG\u003c\/b\u003e\u003cbr\u003e\n– BH iLynx Trail Carbon Pro 8.9\u003cbr\u003e\n– BH iLynx Trail Carbon Pro 8.8\u003cbr\u003e\n– BH iLynx Trail Carbon 8.7\u003cbr\u003e\n– BH iLynx Trail Carbon 8.6\u003cbr\u003e\n– BH iLynx Race Carbon Pro 7.9\u003cbr\u003e\n– BH iLynx Race Carbon Pro LT 7.8\u003cbr\u003e\n– BH iLynx Race Carbon LT 7.7\u003cbr\u003e\n– BH iLynx Race Carbon LT 7.6\u003cbr\u003e\n– BH Core Race Carbon 1.6\u003cbr\u003e\n– BH Core Gravelx Carbon 2.6\u003cbr\u003e\n– BH Core Gravelx 2.4\u003cbr\u003e\n– BH Core Gravelx 2.2\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eBHZ by Seg\u003c\/b\u003e\u003cbr\u003e\n– BH iLynx Trail\u003cbr\u003e\n– BH iLynx Race\u003cbr\u003e\n– BH iLynx Race Carbon\u003cbr\u003e\u003cbr\u003e\n\nThis device is not compatible with BH ebikes equipped with Dapu MD250 motors (also called BH Drive-1E 36V, BH 1E, BH 2E and BH 2ESMAG). For ebikes that mount this motor, the Furious Evo for Dapu MD250 is available (click here).\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-BH-IT-EN-FR_compressed.pdf?v=1741088515\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Red Connectors","offer_id":55336062091638,"sku":"SF-BH-2EXMAG-RED","price":149.0,"currency_code":"EUR","in_stock":true},{"title":"Black Connectors","offer_id":55336062124406,"sku":"SF-BH-2EXMAG-BLACK","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-bh-2exmag-and-bhz-by-seg-motors-1145465303.jpg?v=1741935407"},{"product_id":"speedfun-furious-evo-easy-for-dapu-md250-motors","title":"SpeedFun Furious Evo easy+ for Dapu MD250 motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo easy+ tuning device for Dapu MD250 (BH Drive-1E 36V, BH 1E, BH 2E, BH 2ESMAG, Megamo Central Motor, Megamo e-Gravel central motor, Central Motor DP, Megamo mid motor) is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed that is always lower than 25 KmH in order to obtain a very high real speed with the motor active. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by your legs \n\u003cbr\u003e\nWhen the tuning device is active, since it has no communication with the display, it will show halved data on the display starting from a certain threshold.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).v\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nCompatible with Dapu MD250 motor mainly used by the following ebike manufacturers:\u003cbr\u003e\n– BH Bikes under the names “BH Drive-1E 36V”, “BH Core”, “BH 1E”, “BH 2E” and “BH 2ESMAG”\u003cbr\u003e\n– Megamo under the names “Megamo Central Motor”, “Megamo Central Motor DP” and “Megamo Mid Motor”\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\nThis device is compatible only and exclusively with ebikes equipped with a Dapu MD250 motor. Check the connectors before purchasing, if they do not match those in the photo you probably have a Dapu MD250S. You can find the correct product \u003ca href=\"\/en-lt\/products\/speedfun-furious-evo-easy-for-dapu-md250s-motors\"\u003eHERE\u003c\/a\u003e \n\u003cbr\u003e\u003cbr\u003e\nThis device is not compatible with BH ebikes equipped with 2EXMAG motors. For ebikes that mount this motor, the appropriate tuning is available \u003ca href=\"\/en-lt\/products\/speedfun-furious-evo-easy-for-bh-2exmag-and-bhz-by-seg-motors\"\u003eHERE\u003c\/a\u003e\n\u003cbr\u003e\u003cbr\u003e\nEbike with Dapu MD250 motor where the Furious Evo easy+ device has been successfully installed (this list is illustrative and not exhaustive)\u003cbr\u003e\n– BH Atom\u003cbr\u003e\n– BH Lynx and BH iLynx\u003cbr\u003e\n– BH Atom Cross\u003cbr\u003e\n– BH Core\u003cbr\u003e\n– Megamo Ridon FS\u003cbr\u003e\n– Megamo Ridon 04\u003cbr\u003e\n– Megamo Ridon 10\u003cbr\u003e\n– Megamo Low Ridon 05\u003cbr\u003e\n– Megamo Kansas 24\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-DAPU-MD250-IT-EN-FR_compressed.pdf?v=1741092552\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55336221442422,"sku":"SF-DAPU-MD250","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-dapu-md250-motors-sf-dapu-md250-1145465299.jpg?v=1741935406"},{"product_id":"speedfun-ribelle-for-specialized-turbo-levo-sl-kenevo-sl-creo-sl-como-sl-and-vado-sl","title":"SpeedFun Ribelle for Specialized Turbo Levo SL, Kenevo SL, Creo SL, Como SL and Vado SL (SL 1.1, SL 1.2 motors)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Ribelle is a tuning for Specialized ebikes with SL 1.1 and SL 1.2 motor that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 km\/h, making full use of the motor’s potential.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively with Specialized SL 1.1 and SL 1.2 motors mounted on Specialized Turbo Levo SL, Kenevo SL, Creo SL, Como SL and Vado SL ebikes and TCU (CTU1), MasterMind TCU (TCU2 ) and MasterMind TCD.\n\u003cbr\u003e\u003cbr\u003e\nThe Ribelle tuning device for Specialized SL ebikes always shows real speeds and distances on the display, if present. It can be activated or deactivated by pressing a simple sequence of keys directly from the ebike handlebar control. Activation and deactivation of the device is signaled on the TCU.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribelle is equipped with original connectors thanks to which no physical modification of the ebike is necessary and they do not alter the characteristics of electrical resistance and water tightness.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\nType the sequence on the handlebar control: - + - +\u003cbr\u003e\nA feedback will be briefly displayed on the battery charge level. The charge increases to indicate the high speed setting. Charge drops to indicate speed setting 25 kmH.\u003cbr\u003e\nThe setting mode remains memorized even if the ebike is switched off.\u003cbr\u003e\u003cbr\u003e\nIt is possible to carry out this operation even when the bike is not equipped with a remote control on the handlebar. In this case, type the sequence on the top key of the TCU LED: Long press, quick press, long press, quick press.\u003cbr\u003e\u003cbr\u003e\nFeedback will be briefly displayed on the battery charge level. The charge rises to indicate the high speed setting. The charge drops to indicate the speed setting at 25 kmH.\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nSpeedFun Ribelle is a tuning for Specialized ebikes with SL 1.1 and SL 1.2 motors ONLY. Works with TCU, TCU Mastermind and TCD displays!\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eTested e-bikes with SpeedFun Ribelle for Specialized SL, this list is illustrative not exhaustive\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n– Specialized S-Works Turbo Kenevo SL\u003cbr\u003e\n– Specialized Turbo Kenevo SL Expert\u003cbr\u003e\n– Specialized Turbo Kenevo SL Comp\u003cbr\u003e\n– Specialized S-Works Turbo Levo SL\u003cbr\u003e\n– Specialized Turbo Levo SL Expert Carbon\u003cbr\u003e\n– Specialized Turbo Levo SL Comp Carbon\u003cbr\u003e\n– Specialized Turbo Levo SL Comp\u003cbr\u003e\n– Specialized S-Works Turbo Creo SL EVO\u003cbr\u003e\n– Specialized Turbo Creo SL Expert Carbon\u003cbr\u003e\n– Specialized Turbo Creo SL Comp Carbon Evo\u003cbr\u003e\n– Specialized Turbo Creo SL Comp Carbon\u003cbr\u003e\n– Specialized Turbo Creo SL Comp E5\u003cbr\u003e\n– Specialized Turbo Creo SL Comp E5\u003cbr\u003e\n– Specialized Turbo Como SL 4.0\u003cbr\u003e\n– Specialized Turbo Vado SL 5.0\u003cbr\u003e\n– Specialized Turbo Vado SL 4.0 Step-Through\u003cbr\u003e\n– Specialized Turbo Vado SL 4.0\u003cbr\u003e\n– Specialized Turbo Vado SL 4.0 Step-Through Equipped\u003cbr\u003e\n– Specialized Turbo Vado SL 3.0\u003cbr\u003e\n– Specialized Turbo Vado SL 3.0 Step-Through\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cb\u003eIMPORTANT:\u003cbr\u003e\nConnect the Mission Control app ONLY when the tuning device is DEACTIVATED\nIf the connection is made with tuning device ACTIVATED the app RECORDS THE TAMPERING\u003c\/b\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-SpeedFun-RIBELLE-SPECIALIZED-SL-e-CREO-IT-EN-FR_compressed.pdf?v=1741163369\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55339165417846,"sku":"SF-SPECSL-RIBELLE","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-specialized-turbo-levo-sl-kenevo-sl-creo-sl-como-sl-and-vado-sl-sl-1-1-sl-1-2-motors-sf-specsl-ribelle-1145465298.png?v=1741935404"},{"product_id":"speedfun-ribelle-for-specialized-turbo-levo-turbo-kenevo-and-turbo-tero-2-1-and-2-2-motors","title":"SpeedFun Ribelle for Specialized Turbo Levo, Turbo Kenevo and Turbo Tero (2.1 and 2.2 motors)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Ribelle is a ebike tuning for Specialized ebike that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle installed, active assistance is increased over 60 km\/h .\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively with Specialized 2.1 and 2.2 motor (officially “Turbo 2.1” and “Turbo Full Power System 2.2”) mounted on Turbo Levo and Turbo Kenevo e-bikes equipped with TCU (code TCU01) or MasterMind TCU (code TCU02), MasterMind TCD.\n\u003cbr\u003e\u003cbr\u003e\nThe Specialized Ribelle ebike tuning device always shows real speed and mileage on the display, if any. It can be activated or deactivated by pressing a simple sequence of keys directly from the ebike handlebar control. The activation and deactivation of the device is reported on the TCU.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribelle is a very small device, measuring only 49 x 16,5 x 7,5 mm. It is equipped with original connectors thanks to which no physical modification of the ebike is necessary and do not alter the characteristics of electrical resistance and water tightness. The SpeedFun speed release, specifically designed to be installed under the TCU, makes installation quick and easy without having to work in the motor area.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribelle for Specialzied thanks to its particular operating algorithm comes into operation when 16 km\/h is reached without the cyclist noticing any difference in assistance. It does not intervene in any way at low speeds. This important precaution has been implemented to avoid power losses, failures or “hiccup” operations.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\nType the sequence on the handlebar control: - + - +\u003cbr\u003e\nA feedback will be briefly displayed on the battery charge level. The charge increases to indicate the high speed setting. Charge drops to indicate speed setting 25 kmH.\u003cbr\u003e\nThe setting mode remains memorized even if the ebike is switched off.\u003cbr\u003e\u003cbr\u003e\nIt is possible to carry out this operation even when the bike is not equipped with a remote control on the handlebar. In this case, type the sequence on the top key of the TCU LED: Long press, quick press, long press, quick press.\u003cbr\u003e\u003cbr\u003e\nFeedback will be briefly displayed on the battery charge level. The charge rises to indicate the high speed setting. The charge drops to indicate the speed setting at 25 kmH.\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nSpeedFun Ribelle is a tuning for Specialized ebikes with Brose Specialized 2.1 and 2.2 motors ONLY. Works with TCU, TCU Mastermind and TCD displays!\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eTested e-bikes with SpeedFun Ribelle for Brose Specialized 2.1 and 2.2 motors, this list is illustrative not exhaustive\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n– Specizlied Turbo Kenevo Expert\u003cbr\u003e\n– Specizlied Turbo Kenevo Comp\u003cbr\u003e\n– Specizlied Turbo Levo Hardtail Comp M5\u003cbr\u003e\n– Specialized Turbo Levo Hardtail M5\u003cbr\u003e\n– Specialized S-Works Turbo Levo\u003cbr\u003e\n– Specialized Turbo Levo Pro\u003cbr\u003e\n– Specialized Turbo Levo Expert\u003cbr\u003e\n– Specialized Turbo Levo Comp M5\u003cbr\u003e\n– Specialized Turbo Levo M5\u003cbr\u003e\n– Specialized Turbo Tero 5.0\u003cbr\u003e\n– Specialized Turbo Tero 4.0 EQ\u003cbr\u003e\n– Specialized Turbo Tero 4.0\u003cbr\u003e\n– Specialized Turbo Tero 3.0\u003cbr\u003e\n– Specialized Turbo Tero 3.0 Step-Through\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eImportant! Connect the Mission Control app ONLY when the tuning device is DEACTIVATED. If the connection is made with tuning device ACTIVATED the app RECORDS THE TAMPERING. Be careful! \n\u003c\/b\u003e\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-RIBELLE-BROSE-SPECIALIZED-V2-IT-EN-FR_compressed.pdf?v=1741170797\" target=\"_blank\" class=\"btn\"\u003eInstallation guide Brose Specialized\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-RIBELLE-BROSE-SPECIALIZED-V2-TERO-IT-EN-FR_compressed.pdf?v=1741170978\" target=\"_blank\" class=\"btn\"\u003eInstallation guide Turbo Tero\u003c\/a\u003e\n\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55339337056630,"sku":"SF-BSPEC-RIBELLE","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-specialized-turbo-levo-turbo-kenevo-and-turbo-tero-2-1-and-2-2-motors-sf-bspec-ribelle-1145465289.png?v=1741935403"},{"product_id":"speedfun-furious-evo-easy-for-specialized-turbo-levo-sl-kenevo-sl-creo-sl-como-sl-and-vado-sl-sl-1-1-sl-1-2-motors","title":"SpeedFun Furious Evo easy+ for Specialized Turbo Levo SL, Kenevo SL, Creo SL, Como SL and Vado SL (SL 1.1, SL 1.2 motors)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for Mahle Specialized SL 1.1 and Turbo SL 1.2 motors (Specialized Turbo Kenevo SL, Turbo Levo SL, Turbo Creo SL, Turbo Vado SL, Turbo Como SL and Turbo Vado SL) is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a very high real speed with the motor active. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, since it has no communication with the display, it will show halved data on the display starting from a certain threshold.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the e-bike is switched off. It can be installed on Specialized e-bikes with Mahle Specialized SL 1.1 motor (35Nm) and Turbo SL 1.2 (50Nm) mostly mounted on Turbo Kenevo SL, Turbo Levo SL, Turbo Creo SL, Turbo Vado SL, Turbo Como SL and Turbo Vado SL regardless of the type of display or command side of the e-bike.\n\u003cbr\u003e\u003cbr\u003e\nThe Furious Evo tuning device for Mahle Specialized SL 1.1 and Turbo SL 1.2 motor can be activated\/deactivated with a very practical system (for further information consult the instructions) and does not require activation of the motor light output. The device is supplied plug and go ready to use, it can be installed very simply thanks to the original connectors with which no physical modification of the e-bike is required.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\u003cbr\u003e\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nSpeedFun Ribelle is a tuning for Specialized ebikes with SL 1.1 and SL 1.2 motors ONLY. Works with TCU, TCU Mastermind, Mastermind H3 and TCD displays!\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eTested e-bikes with SpeedFun Ribelle for Specialized SL, this list is illustrative not exhaustive\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n– S-Works Turbo Kenevo SL\u003cbr\u003e\n– Turbo Kenevo SL Expert\u003cbr\u003e\n– Turbo Kenevo SL Comp\u003cbr\u003e\n– Turbo Levo SL Expert Carbon\u003cbr\u003e\n– Turbo Levo SL Expert Carbon\u003cbr\u003e\n– Turbo Levo SL Comp Carbon\u003cbr\u003e\n– Turbo Levo SL Comp Carbon\u003cbr\u003e\n– Turbo Levo SL Comp\u003cbr\u003e\n– S-Works Turbo Creo SL EVO\u003cbr\u003e\n– S-Works Turbo Creo SL\u003cbr\u003e\n– Turbo Creo SL Expert Carbon EVO\u003cbr\u003e\n– Turbo Creo SL Expert Carbon\u003cbr\u003e\n– Turbo Creo SL Comp Carbon EVO\u003cbr\u003e\n– Turbo Creo SL Comp Carbon\u003cbr\u003e\n– Turbo Creo SL Comp E5\u003cbr\u003e\n– Turbo Como SL 5.0\u003cbr\u003e\n– Turbo Como SL 4.0\u003cbr\u003e\n– Turbo Vado SL 4.0 Step-Through Equipped\u003cbr\u003e\n– Turbo Vado SL 4.0 EQ\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-SPECIALIZED-SL-e-CREO-IT-EN-FR_compressed.pdf?v=1741180132\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55339935334774,"sku":"SF-SPECSL-FE","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-specialized-turbo-levo-sl-kenevo-sl-creo-sl-como-sl-and-vado-sl-sl-1-1-sl-1-2-motors-sf-specsl-fe-1145465290.png?v=1741935401"},{"product_id":"speedfun-furious-evo-easy-for-specialized-turbo-levo-turbo-kenevo-and-turbo-tero-2-1-and-2-2-motors","title":"SpeedFun Furious Evo easy+ for Specialized Turbo Levo, Turbo Kenevo and Turbo Tero (1.1, 1.2, 2.0, 2.1 and 2.2 motors)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for Specialized is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, having no communication with the TCU\/TCD, it will show the halved data on any display (or app) starting from a certain threshold.\n\u003cbr\u003e\u003cbr\u003e\nThis device can be installed on Specialized Turbo Levo, Turbo Kenevo, Turbo Tero, Turbo Como and Turbo Vado ebike with Brose motor (officially “Turbo 1.1”, “Turbo 1.2”, 2.0, “Turbo 2.1” and “Turbo Full Power System 2.2”) equipped with TCU1\/TCU2 “MasterMind” or TCD. Also compatible with Specialized gen1 ebikes (ebike control on the battery).\n\u003cbr\u003e\u003cbr\u003e\nThe Furious Evo tuning device for Specialized can be activated\/deactivated at will with a very practical system (for further information, consult the instructions) and maintains the setting after the ebike is turned off.\n\u003cbr\u003e\u003cbr\u003e\nThe device is supplied plug and go ready to use and is installed in a very simple way thanks to the compatible connectors with which no physical modification of the ebike is necessary.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11:00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal (only one, by feet). Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nSpeedFun Ribelle is a tuning for Specialized ebikes with Brose Specialized 2.0, 2.1 and 2.2 motors ONLY. Works with TCU, TCU Mastermind and TCD displays!\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eTested e-bikes with SpeedFun Ribelle for Brose Specialized 2.0, 2.1 and 2.2 motors, this list is illustrative not exhaustive\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n– Specialized Turbo Kenevo Expert\u003cbr\u003e\n– Specizlied Turbo Kenevo Comp\u003cbr\u003e\n– Specizlied Turbo Levo Hardtail Comp M5\u003cbr\u003e\n– Specialized Turbo Levo Hardtail M5\u003cbr\u003e\n�� Specialized S-Works Turbo Levo\u003cbr\u003e\n– Specialized Turbo Levo Pro\u003cbr\u003e\n– Specialized Turbo Levo Expert\u003cbr\u003e\n– Specialized Turbo Levo Comp M5\u003cbr\u003e\n– Specialized Turbo Levo M5\u003cbr\u003e\n– Specialized Turbo Levo Comp Alloy G3\u003cbr\u003e\n– Specialized Turbo Levo Alloy G3\u003cbr\u003e\n– Specialized S-Works Turbo Levo G3\u003cbr\u003e\n– Specialized Turbo Levo Pro Carbon\u003cbr\u003e\n– Specialized Turbo Levo Expert G3\u003cbr\u003e\n– Specialized Turbo Levo Comp Carbon\u003cbr\u003e\n– Specialized Turbo Levo Comp Alloy\u003cbr\u003e\n– Specialized Turbo Levo Carbon\u003cbr\u003e\n– Specialized S-Works Turbo Levo Carbon\u003cbr\u003e\n– Specialized Turbo Tero 5.0\u003cbr\u003e\n– Specialized Turbo Tero 4.0 EQ\u003cbr\u003e\n– Specialized Turbo Tero 4.0\u003cbr\u003e\n– Specialized Turbo Tero 3.0\u003cbr\u003e\n– Specialized Turbo Tero 3.0 Step-Through\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-BROSE-IT-EN-FR_compressed.pdf?v=1741249882\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55344358228342,"sku":"SF-BSPEC-FE","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-specialized-turbo-levo-turbo-kenevo-and-turbo-tero-1-1-1-2-2-1-and-2-2-motors-sf-bspec-fe-1145465283.png?v=1741935399"},{"product_id":"speedfun-furious-evo-easy-for-dapu-md250s-motors","title":"SpeedFun Furious Evo easy+ for Dapu MD250S motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for Dapu MD250S is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. Compatible with Dapu MD250S motor mainly used by Cortina, Ekletta and many other.\n\u003cbr\u003e\u003cbr\u003e\nThe Furiosu Evo for Dapu MD250S tuning device can be activated\/deactivated in a very practical system (for more information see the instructions). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eCaution\u003c\/b\u003e\u003cbr\u003e\nThis device is compatible only and exclusively with ebikes equipped with a Dapu MD250S motor. Check the connectors before buying, if they don’t match the ones in the photo you probably have a Dapu MD250. You can find the correct product \n\u003ca href=\"\/en-lt\/products\/speedfun-furious-evo-easy-for-dapu-md250-motors\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).v\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nSpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. Compatible with Dapu MD250S motor mainly used by Cortina, Ekletta and many other.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\nThis device is compatible only and exclusively with ebikes equipped with a Dapu MD250S motor. Check the connectors before purchasing, if they do not match those in the photo you probably have a Dapu MD250. You can find the correct product  \u003ca href=\"\/en-lt\/products\/speedfun-furious-evo-easy-for-dapu-md250-motors\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003cbr\u003e\u003cbr\u003e\nEbike with Dapu MD250S motor where the Furious Evo easy+ device has been successfully installed (this list is illustrative and not exhaustive)\u003cbr\u003e\n– Ekletta Bumpy\u003cbr\u003e\n– Rock Machine e-bike storm E70 29″\u003cbr\u003e\n– Rock Machine e-bike Storm INT e90-29\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-DAPU-MD250S-IT-EN-FR_compressed.pdf?v=1741257186\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55344642949494,"sku":"SF-DAPU-MD250S","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-dapu-md250s-motors-sf-dapu-md250s-1145465282.png?v=1741935398"},{"product_id":"speedfun-ribelle-for-yamaha-booster-easy","title":"SpeedFun Ribelle for Yamaha Booster Easy (PW-S2, Display A)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Ribelle is a tuning for Yamaha Booster Easy that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 kmH, making full use of the motor’s potential.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively on Yamaha Booster Easy ebikes equipped with PW-S2 motor and Yamaha display A “sideswitch” display.\n\u003cbr\u003e\u003cbr\u003e\nThe tuning device Ribelle for Yamaha Booster Easy ebikes shows all real data on the display\/app. It can be activated or deactivated by pressing a simple sequence of keys and the activation\/deactivation of the device is indicated on the display. This tuning is equipped with original connectors for quick and easy installation.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nActivating and deactivating the speed unlock is achieved by typing the following key sequence: light, light.\u003cbr\u003e\nTo confirm activation, the figure 50 appears briefly on the display. (the motor assists beyond 50)\u003cbr\u003e\nTo confirm deactivation, the figure 25 appears briefly on the display (the motor assists up to 25)\u003cbr\u003e\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nThis speed release device is compatible only and exclusively with Yamaha Booster Easy ebikes equipped with Yamaha PW-S2 motor and Yamaha display\/control A “sideswitch”.\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-RIBELLE-YAMAHA-PW-X3-PW-S2-IT-EN-FR_compressed.pdf?v=1741266762\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55345191485814,"sku":"SF-Y-BE-RIBELLE","price":205.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-yamaha-booster-easy-pw-s2-display-a-sf-y-be-ribelle-1145465279.jpg?v=1741935396"},{"product_id":"speedfun-furious-evo-on-off-lights-for-yamaha-booster-easy-pw-s2-motor","title":"SpeedFun Furious Evo on\/off lights for Yamaha Booster Easy (PW-S2 motor)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for Yamaha Booster Easy ebikes is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a very high real speed with the motor active. The maximum speed limit will therefore be dictated by the motor power added to the power expressed by your legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, not having communication with the display, it will show the altered data on the display\/app starting from a certain threshold.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo can be installed only and exclusively on Yamaha brand Booster Easy ebikes equipped with a PW-S2 motor regardless of the type of display or lateral control of the ebike.\n\u003cbr\u003e\u003cbr\u003e\nThe device can be activated\/deactivated by simply pressing the ebike light button. If the ebike already has lights connected to the light output, or if it is not possible to use it, it will still be possible to activate\/deactivate tuning with a very practical system (for further information, consult the instructions). The device is supplied plug and go ready to use and can be installed very simply thanks to the original connectors with which no physical modification of the ebike is necessary.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11:00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nThis speed release device is compatible only and exclusively with Yamaha Booster Easy ebikes equipped with Yamaha PW-S2 motor regardless of the display. This tuning kit will not show real speed data on the display \/ app.\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-YAMAHA-PW-X3-HAIBIKE-IT-EN-FR_compressed.pdf?v=1741328618\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55350253617526,"sku":"SF-Y-BE-FE","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-on-off-lights-for-yamaha-booster-easy-pw-s2-motor-sf-y-be-fe-1145465246.png?v=1741935394"},{"product_id":"speedfun-ribelle-for-yamaha-moro-07","title":"SpeedFun Ribelle for Yamaha Moro 07 (PW-X3 motor with Interface X display)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Ribelle is a tuning for Yamaha Moro 07 ebikes that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 kmH (info), making full use of the motor’s potential.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively on Yamaha brand Moro 07 ebikes equipped with PW-X3 motor and Yamaha Interface X display\/control.\n\u003cbr\u003e\u003cbr\u003e\nThe Ribelle speed unlock device for Yamaha Moro 07 shows all the real data on the display\/app. It can be activated or deactivated by pressing a simple sequence of keys and the activation\/deactivation of the device is indicated on the display. This tuning is equipped with original connectors for quick and easy installation.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nActivating and deactivating the speed unlock is achieved by typing the following key sequence: light, light.\u003cbr\u003e\nTo confirm activation, the figure 50 appears briefly on the display. (the motor assists beyond 50)\u003cbr\u003e\nTo confirm deactivation, the figure 25 appears briefly on the display (the motor assists up to 25)\u003cbr\u003e\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nThis speed release device is compatible only and exclusively with Yamaha Moro 07 with Interface X display.\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-SpeedFun-ebike-tuning-SpeedFun-Ribelle-per-Yamaha-Moro-07.pdf?v=1741342854\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55350868279670,"sku":"SF-Y-M7-RIBELLE","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-yamaha-moro-07-pw-x3-motor-with-interface-x-display-sf-y-m7-ribelle-1146031995.png?v=1741935393"},{"product_id":"speedfun-furious-evo-f-easy-for-yamaha-moro-07-pw-x3-motor","title":"SpeedFun Furious Evo F easy+ for Yamaha Moro 07 (PW-X3 motor)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo F tuning device for Yamaha Moro 07 ebikes is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a very high real speed with the motor active. The maximum speed limit will therefore be dictated by the motor power added to the power expressed by your legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, not having communication with the display, it will show the altered data on the display\/app starting from a certain threshold.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo F can be installed only and exclusively on Yamaha brand Moro 07 ebikes equipped with a PW-X3 motor regardless of the type of display or handlebar control of the ebike.\n\u003cbr\u003e\u003cbr\u003e\nThe device can be activated\/deactivated with a very practical system (for further information see the instructions). It is supplied plug and go ready to use and can be installed very simply thanks to the original connectors with which no physical modification of the ebike is necessary.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nThis speed release device is compatible only and exclusively with Yamaha Moro 07 (PW-X3) regardless of the display\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-F-YAM-YAM-MORO-IT-EN-FR_compressed.pdf?v=1741345987\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55351061807478,"sku":"SF-Y-M7-FE","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-f-easy-for-yamaha-moro-07-pw-x3-motor-sf-y-m7-fe-1146031994.png?v=1741935391"},{"product_id":"speedfun-ribelle-for-yamaha-wabash-rt-and-crosscore-rc-pw-st-motor-with-interface-x-display","title":"SpeedFun Ribelle for Yamaha Wabash RT and CrossCore RC (PW-ST motor)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Ribelle is a tuning for Yamaha Wabash RT and CrossCore RC that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 kmH (info), making full use of the motor’s potential.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively on Yamaha Wabash RT and CrossCore RC ebikes equipped with PW-ST motor and Yamaha display A “sideswitch” display.\n\u003cbr\u003e\u003cbr\u003e\nThe tuning device Ribelle for Yamaha Wabash RT and CrossCore RC ebikes shows all real data on the display\/app. It can be activated or deactivated by pressing a simple sequence of keys and the activation\/deactivation of the device is indicated on the display. This tuning is equipped with original connectors for quick and easy installation.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nActivating and deactivating the speed unlock is achieved by typing the following key sequence: light, light.\u003cbr\u003e\nTo confirm activation, the figure 50 appears briefly on the display. (the motor assists beyond 50)\u003cbr\u003e\nTo confirm deactivation, the figure 25 appears briefly on the display (the motor assists up to 25)\u003cbr\u003e\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nThis speed release device is compatible only and exclusively on Yamaha Wabash RT and CrossCore RC ebikes equipped with PW-ST motor and Yamaha display A “sideswitch” display.\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-SpeedFun-ebike-tuning-SpeedFun-Ribelle-Yamaha-Wabash-RT-e-CrossCore-RC.pdf?v=1741347797\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55351191863670,"sku":"SF-Y-WRT\/CRC-RIBELLE","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-yamaha-wabash-rt-and-crosscore-rc-pw-st-motor-sf-y-wrt-crc-ribelle-1145486769.png?v=1741935390"},{"product_id":"speedfun-furious-evo-f-easy-for-yamaha-wabash-rt-and-crosscore-rc-pw-st-motor","title":"SpeedFun Furious Evo F easy+ for Yamaha Wabash RT and CrossCore RC (PW-ST motor)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo F tuning device for Yamaha Wabash RT and CrossCore RC ebikes is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with the engine active very high. The maximum speed limit will therefore be dictated by the engine power added to the power expressed by your legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, not having communication with the display, it will show the altered data on the display\/app starting from a certain threshold.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo F can be installed only and exclusively on Yamaha brand ebikes, Wabash RT and CrossCore RC models equipped with a PW-ST motor, regardless of the type of display or lateral control of the ebike.\n\u003cbr\u003e\u003cbr\u003e\nThe device can be activated\/deactivated with a very practical system (for further information see the instructions). It is supplied plug and go ready to use and can be installed very simply thanks to the original connectors with which no physical modification of the ebike is necessary.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nSpeedFun Furious Evo F can be installed only and exclusively on Yamaha brand ebikes, Wabash RT and CrossCore RC models equipped with a PW-ST motor, regardless of the type of display or lateral control of the ebike.\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-F-Easy-YAM-YAM-CROSSCORE-WABASH-IT-EN-FR_compressed.pdf?v=1741349124\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55351341220214,"sku":"SF-Y-WRT\/CRC-FE","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-f-easy-for-yamaha-wabash-rt-and-crosscore-rc-pw-st-motor-sf-y-wrt-crc-fe-1145486766.png?v=1741935388"},{"product_id":"speedfun-rebel-for-yamaha-pw-x-pw-x2-pw-se-pw-te-pw-st","title":"SpeedFun Ribelle for Yamaha PW-X, PW-X2, PW-SE, PW-TE, PW-ST","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nATTENTION!\nThis device is compatible with engines from 2019 onwards.\nDistinction between 2017\/18 engines and engines from 2019 onwards: The two engines are externally the same but the communication system becomes encrypted from 2019. Yamaha has chosen to reverse the sex of the connectors to avoid fitting old displays on new engines where they would not work.\n\u003cbr\u003e\u003cbr\u003e\nThe 2019 engine can be recognized because it normally mounts the “A” sideswitch and “C” displays.\nA unique way to distinguish it is to check the gender of the 5-way connector that connects the display (see image below).\u003cbr\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Riconoscere-2017-18-da-2019-uai-2880x625.png?v=1741350986\" class=\"img-fluid\"\u003e\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nActivating and deactivating the speed unlock is achieved by typing the following key sequence: light, light.\u003cbr\u003e\nTo confirm activation, the figure 50 appears briefly on the display. (the motor assists beyond 50)\u003cbr\u003e\nTo confirm deactivation, the figure 25 appears briefly on the display (the motor assists up to 25)\u003cbr\u003e\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nIt is designed for Yamaha PW-X, PW-X2, PW-SE, PW-TE and PW-ST engines from 2019 onwards with Yamaha display type A (Sideswitch) and type C\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-USO-RIBELLE-per-YAMAHA-PW-X-e-PW-SE.pdf?v=1741351215\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/EehTmortlqU?si=vPsQ2y7AhkuPpFCt\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55351480287606,"sku":"SF-Y-PW-X\/X2\/SE\/TE\/ST-RIBELLE","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-yamaha-pw-x-pw-x2-pw-se-pw-te-pw-st-sf-y-pw-x-x2-se-te-st-ribelle-1145486763.png?v=1741935386"},{"product_id":"speedfun-furious-evo-for-yamaha-pw-pw-x-pw-x2-pw-se-pw-te-pw-st-pw-ce-and-pw-c2","title":"SpeedFun Furious Evo for Yamaha PW, PW-X, PW-X2, PW-SE, PW-TE, PW-ST, PW-CE and PW-C2","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for Yamaha is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, having no communication with the display, it will show the altered data on the display starting from a certain threshold.\n\u003cbr\u003e\u003cbr\u003e\nThe Furious evo speed release device for Yamaha is compatible with Yamaha PW, PW-X, PW-X2, PW-SE, PW-TE, PW-ST, PW-CE and PW-C2 motor mostly installed on Haibike, Ghost ebikes , Lapierre, MBK, Winora, Gitane, Bixs, Rockrider (Decathlon) and many others regardless of the type of display or lateral control of the ebike.\n\u003cbr\u003e\u003cbr\u003e\nThe Furiosu Evo tuning device for Yamaha can be activated\/deactivated by simply pressing the ebike’s light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate\/deactivate the tuning with a very practical system (for more information see the instructions).\n\u003cbr\u003e\u003cbr\u003e\nThe device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nCompatible with Yamaha PW, PW-X, PW-X2, PW-SE, PW-TE, PW-ST, PW-CE and PW-C2 motors mostly mounted on Haibike, Yamaha, Ghost, Lapierre, MBK, Winora, Gitane, Bixs, Rockrider (Decathlon) and many more ebikes.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT\u003c\/b\u003e:This device is not compatible with Yamaha brand e-bikes (e.g. Yamaha Moro, CrossCore, Booster, Wabash etc.) \u003cbr\u003e\u003cbr\u003e\n\nE-bike with Yamaha PW, PW-X, PW-X2, PW-SE, PW-TE, PW-ST, PW-CE and PW-C2 motor where the Furious Evo device was successfully installed:\u003cbr\u003e\n– Haibike Xduro Nduro 8.0\u003cbr\u003e\n– Haibike Xduro Nduro 5.0\u003cbr\u003e\n– Haibike Xduro Nduro 10.0\u003cbr\u003e\n– Haibike Xduro Alltrail 6.0\u003cbr\u003e\n– Haibike Xduro Alltrail 5.0\u003cbr\u003e\n– Haibike Xduro Allmtn 8.0\u003cbr\u003e\n– Haibike Xduro Allmtn 5.0\u003cbr\u003e\n– Haibike Xduro Allmtn 10.0\u003cbr\u003e\n– Rockrider (Decathlon) E-EXPL 520\u003cbr\u003e\n– Haibike Nduro 7\u003cbr\u003e\n– Haibike Hardseven 10, 9, 8, ecc\u003cbr\u003e\n– Haibike Hardnine 10, 9, 8, ecc\u003cbr\u003e\n– Haibike Fullseven 9, 8, 7, ecc\u003cbr\u003e\n– Haibike Fullnine 10, 9, 8, 7, ecc\u003cbr\u003e\n– Haibike Dwnhll\u003cbr\u003e\n– Haibike Allmtn se e Allmtn cf se\u003cbr\u003e\n– Haibike Allmtn 7, 6, 5, ecc\u003cbr\u003e\n– Haibike Xduro Adventr FS\u003cbr\u003e\n– Haibike Xduro Adventr 6.0 e Xduro Adventr 5.0\u003cbr\u003e\n– Haibike Trekking 9, Trekking 9 Lowstep e Trekking 9 Lowstandover\u003cbr\u003e\n– Haibike Trekking 8, Trekking 8 Lowstandover\u003cbr\u003e\n– Haibike Trekking 7, Trekking 7 Lowstep e Trekking 7 Lowstandover\u003cbr\u003e\n– Haibike Trekking 6, Trekking 6 Lowstep e Trekking 6 Lowstandover\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-YAMAHA-IT-EN-FR_compressed.pdf?v=1741353179\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/otTsHRm-KvM?si=3WabDBPxN7NTllj3\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55351653663094,"sku":"SF-Y-PW-X\/X2\/SE\/TE\/ST-FE","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-for-yamaha-pw-pw-x-pw-x2-pw-se-pw-te-pw-st-pw-ce-and-pw-c2-sf-y-pw-x-x2-se-te-st-fe-1145486761.png?v=1741935384"},{"product_id":"speedfun-furious-evo-on-off-lights-for-yamaha-pw-x3-and-pw-s2","title":"SpeedFun Furious Evo on\/off lights for Yamaha PW-X3 and PW-S2","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for Yamaha PW-X3 and PW-S2 is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed that is always lower than 25 KmH in order to obtain a very high real speed with the motor active. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, since it has no communication with the display, it will show halved data on the display starting from a certain threshold.\n\u003cbr\u003e\u003cbr\u003e\nIt can be installed on ebikes with Yamaha PW-X3 and PW-S2 motor mostly installed on Haibike Nduro, AllMtn, Adventr FS and many others, regardless of the type of display or side control of the ebike.\n\u003cbr\u003e\u003cbr\u003e\nThe Furiosu Evo tuning device for Yamaha PW-X3 and PW-S2 ebikes can be activated\/deactivated by simply pressing the ebike light button. If the ebike already has the lights connected to the light output, or if it is not possible to use it, it will still be possible to activate\/deactivate the tuning with a very practical system (for more information, consult the instructions). The device is supplied plug and go ready to use it is very simple to install thanks to the original connectors with which no physical modification of the ebike is required.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nCompatible with Yamaha PW-X3 and PW-S2 regardless of the display.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT\u003c\/b\u003e:This device is not compatible with Yamaha brand e-bikes (e.g. Yamaha Moro, CrossCore, Booster, Wabash etc.) \u003cbr\u003e\u003cbr\u003e\n\nE-bike with Yamaha PW-X3 and PW-S2 motor where the Furious Evo device has been successfully installed. This list illustrative not exhaustive:\u003cbr\u003e\u003cbr\u003e\n– Haibike NDuro 8 Freeride\u003cbr\u003e\n– Haibike Nduro 7\u003cbr\u003e\n– Haibike Nduro 6\u003cbr\u003e\n– Haibike AllMtn 10\u003cbr\u003e\n– Haibike AllMtn 7\u003cbr\u003e\n– Haibike AllMtn 4\u003cbr\u003e\n– Haibike AllMtn 2\u003cbr\u003e\n– Haibike ADVENTR FS 10\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Photoroom_20250307_151854.png?v=1741353641\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55351718674806,"sku":"SF-Y-PW-X3\/S2-FE","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-on-off-lights-for-yamaha-pw-x3-and-pw-s2-sf-y-pw-x3-s2-fe-1146031993.png?v=1741935383"},{"product_id":"speedfun-rebel-for-yamaha-pw-x3-and-pw-s2","title":"SpeedFun Ribelle for Yamaha PW-X3 and PW-S2 motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Ribelle is a tuning for ebikes equipped with a Yamaha PW-X3 and PW-S2 motor that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 kmH (info), making full use of the motor’s potential.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible with Yamaha PW-X3 and PW-S2 motor with Yamaha display A “sideswitch”, Yamaha display C “multi-switch” and Yamaha Interface X used on Ghost, Haibike, Lapierre, MBK, Winora, Gitane, Bixs, Fantic and many more ebikes.\n\u003cbr\u003e\u003cbr\u003e\nThe Ribelle tuning device for Yamaha PW-X3 and PW-S2 ebikes shows all real data on the display\/app. It can be activated or deactivated by pressing a simple sequence of keys and the activation\/deactivation of the device is indicated on the display. This tuning is equipped with original connectors for quick and easy installation.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nActivating and deactivating the speed unlock is achieved by typing the following key sequence: light, light.\u003cbr\u003e\nTo confirm activation, the figure 50 appears briefly on the display. (the motor assists beyond 50)\u003cbr\u003e\nTo confirm deactivation, the figure 25 appears briefly on the display (the motor assists up to 25)\u003cbr\u003e\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\n\u003cb\u003eATTENTION! \u003c\/b\u003eThis device is not compatible with Yamaha brand ebikes (e.g. Yamaha Moro, CrossCore, Booster, Wabash etc.). This device is also not compatible with Giant e-bikes.\n\u003cbr\u003e\u003cbr\u003e\nE-bike with Yamaha PW-X3 and PW-S2 motor where the Ribelle device has been successfully installed, this list is illustrative and not exhaustive:\u003cbr\u003e\n– Haibike NDURO 8 Freeride\u003cbr\u003e\n– Haibike NDURO 7\u003cbr\u003e\n– Haibike NDURO 6\u003cbr\u003e\n– Haibike AllMtn 10\u003cbr\u003e\n– Haibike AllMtn 7\u003cbr\u003e\n– Haibike AllMtn 4\u003cbr\u003e\n– Haibike AllMtn 2\u003cbr\u003e\n– Haibike ADVENTR FS 10\u003cbr\u003e\n– Fantic XTF 1.5 Sport\u003cbr\u003e\n– Raymon TrailRay 140E 10.0\u003cbr\u003e\n– Raymon TrailRay 160E 9.0\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-RIBELLE-YAMAHA-PW-X3-PW-S2-IT-EN-FR_compressed_f1f6a066-034c-4d78-83a0-d65815c958cb.pdf?v=1741358897\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55351766024566,"sku":"SF-Y-PW-X3\/S2-RIBELLE","price":205.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-yamaha-pw-x3-and-pw-s2-motors-sf-y-pw-x3-s2-ribelle-1145503093.png?v=1741935381"},{"product_id":"speedfun-furious-evo-for-shimano-ep8-ep800","title":"SpeedFun Furious Evo for Shimano EP8 (EP800)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nWhat is the tuning for Shimano Ep8 (EP800) SpeedFun Furious Evo?\nThe function of the Furious Evo for Shimano Ep8 (EP800) tuning device is to electronically manipulate the rotation speed of the rear wheel and to communicate to the engine a speed always lower than 25 KmH, this allows to obtain a real speed with a very high active engine. The maximum speed limit is given by the power of the engine added to the power expressed by one’s legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the device is active, the display will show the exact speed up to about 20 KmH approx, beyond which a manipulated speed will always be shown below 25 KmH.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo can be activated and deactivated and maintains the setting even after the ebike is turned off. It can be installed on e-bikes with any type of display or side control as well as on e-bikes without a display or that mount the EW-EN100 wireless module.\n\u003cbr\u003e\u003cbr\u003e\nThe new technology of this tuning module for Shimano does not require the activation of the engine light output or interventions with diagnostics or apps. It is supplied plug and go ready to use and installs in a very simple way thanks to the connectors with which no physical modification of the ebike is necessary.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nCompatible with Shimano Ep8 (EP800)\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT\u003c\/b\u003e: not compatible with EP801 and EP600. Does not work with Shimano Di2 electronic derailleur.\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-SHIMANO-EP8-IT-EN-FR_compressed.pdf?v=1741606099\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55361280246134,"sku":"SF-S-EP8","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-for-shimano-ep8-ep800-sf-s-ep8-1146031990.png?v=1741935379"},{"product_id":"speedfun-furious-evo-for-shimano-steps-e5000-e6000-e6001-e6002-e6010-e6012-e6050-e6100-e7000-e8000-and-e8080-motors","title":"SpeedFun Furious Evo for Shimano Steps E5000 E6000 E6001 E6002 E6010 E6012 E6050 E6100 E7000 E8000 and E8080 motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed that is always lower than 25 KmH in order to obtain a very high real speed with the motor active. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs\n\u003cbr\u003e\u003cbr\u003e\nWhen the device is active, the display will show the exact speed up to the threshold of approximately 20 KmH, beyond which a manipulated speed will always be shown below 25 KmH.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is switched off. It can be installed on ebikes with any type of display or side control as well as on ebikes without a display or that mount the EW-EN100 wireless module.\n\u003cbr\u003e\u003cbr\u003e\nThe new technology of this tuning module for Shimano does not require the activation of the motor light output or interventions with diagnostics or apps. It is supplied plug and go ready to use it is very simple to install thanks to the connectors with which no physical modification of the ebike is required.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nThis release device is specially designed for Shimano Steps E5000 E6000 E6001 E6002 E6010 E6012 E6050 E6100 E7000 E8000 and E8080 motors with mechanical derailleur. Not compatible with Shimano Di2\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-SHIMANO-E8000-8080-7000-6100-6000-IT-EN-FR_compressed.pdf?v=1741612324\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55361321402742,"sku":"SF-S-E8000","price":188.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-for-shimano-steps-e5000-e6000-e6001-e6002-e6010-e6012-e6050-e6100-e7000-e8000-and-e8080-motors-sf-s-e8000-1146359079.png?v=1741935377"},{"product_id":"speedfun-ribelle-for-tq-hpr50","title":"SpeedFun Ribelle for TQ HPR50 \/ TQ HPR 60 motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nWhat is the SpeedFun Ribelle ebike tuning kit for TQ HPR50 TQ HPR 60?\nSpeedFun Ribelle is a tuning for ebikes with TQ HPR50 motor that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 kmH (info), making full use of the mtors potential.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device for ebikes is designed for TQ HPR50 TQ HPR 60 motor regardless of the display installed on the ebike. This system is mostly used on Trek, Pinarello, BMC, Simplon, Mondraker, Fantic brand ebikes and many others.\n\u003cbr\u003e\u003cbr\u003e\nThe SpeedFun Ribelle ebike tuning shows all the real data on the display\/app and can be activated or deactivated by pressing a simple sequence of buttons directly from the ebike handlebar control or on display. The activation and deactivation of the device is indicated on the display. The release device is supplied with original connectors for quick and easy installation.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribelle for TQ HPR50 TQ HPR 60 is available in two versions:\n\u003cbr\u003e\u003cbr\u003e\n– \u003cb\u003eVersion for ebikes with control on the handlebars:\u003c\/b\u003e compatible only and exclusively with ebikes equipped with a control to select the level of assistance on the handlebars\u003cbr\u003e\n– \u003cb\u003eVersion for ebikes without control on the handlebar:\u003c\/b\u003e compatible only and exclusively with ebikes without control to select the level of assistance on the handlebar (assistance selection only from HPR Display)\u003cbr\u003e\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nTo activate or deactivate motor support above 25 km\/h it is necessary to type a different sequence depending on the variant of Ribelle device installed.\u003cbr\u003e\u003cbr\u003e\nWith Ribelle for Ebike WITH Control on the Handlebar: type the key sequence: - + - + (minus, plus, minus, plus).\u003cbr\u003e\u003cbr\u003e\nWith Ribelle for Ebike WITHOUT Control on the Handlebar: select assistance OFF and then UP, UP, UP.\u003cbr\u003e\u003cbr\u003e\nIf the procedure is successful, the following animation will be displayed on the speedometer:\u003cbr\u003e\n- If the speedometer rises from 1.1 km\/h to 9.0 km\/h, Ribelle is activated and the motor supports you even above 25 km\/h.\u003cbr\u003e\n- If the speedometer drops from 9.0 km\/h to 1.0 km\/h, Ribelle is deactivated and the motor supports you up to 25 km\/h.\u003cbr\u003e\nType the sequence without pauses. If necessary repeat the procedure\u003cbr\u003e\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nCompatible with TQ HPR50 TQ HPR 60 motors only.\u003cbr\u003e\nE-bike with TQ HPR50 motor where the Ribelle device has been successfully installed this list is illustrative and not exhaustive:\u003cbr\u003e\u003cbr\u003e\n– Trek Fuel EXe 9.9 XX1 AXS\u003cbr\u003e\n– Trek Fuel EXe 9.9 XTR\u003cbr\u003e\n– Trek Domane+ SLR 9 AXS\u003cbr\u003e\n– Trek Domane+ SLR 9\u003cbr\u003e\n– Trek Fuel EXe 9.8 GX AXS\u003cbr\u003e\n– Trek Fuel EXe 9.8 XT\u003cbr\u003e\n– Trek Domane + SLR 7 AXS\u003cbr\u003e\n– Trek Domane+ SLR 6 AXS\u003cbr\u003e\n– Trek Domane+ SLR 7\u003cbr\u003e\n– Trek Fuel EXe 9.7\u003cbr\u003e\n– Trek Domane+ SLR 6\u003cbr\u003e\n– Trek Fuel EXe 9.5\u003cbr\u003e\n– Pinarello Nytro E9 Gravel\u003cbr\u003e\n– Pinarello Nytro E7 Gravel\u003cbr\u003e\n– Pinarello Nytro E5 Gravel\u003cbr\u003e\n– Scott Lumen eRIDE 910\u003cbr\u003e\n– Scott Lumen eRIDE 900\u003cbr\u003e\n– Scott Lumen eRIDE 900 SL\u003cbr\u003e\n– BMC Fourstroke AMP LT\u003cbr\u003e\n– BMC Fourstroke AMP LT one\u003cbr\u003e\n– BMC Fourstroke AMP LT two\u003cbr\u003e\n– BMC Fourstroke AMP LT three\u003cbr\u003e\n– BMC Roadmachine 01 AMP X\u003cbr\u003e\n– Simplon Rapcon Pmax TQ\u003cbr\u003e\n– Mondraker Neat RR\u003cbr\u003e\n– Mondraker Neat R\u003cbr\u003e\n– Fantic Rampage 1.2 Race\u003cbr\u003e\n– Fantic Rampage 1.2 Factory\u003cbr\u003e\n– Fantic Rampage 1.4 Race\u003cbr\u003e\n– Fantic Rampage 1.4 Sport\u003cbr\u003e\n– Fantic Rampage 1.4 Factory\u003cbr\u003e\n– Rotwild R.X275\u003cbr\u003e\n– Bergamont E-Vitess Elite\u003cbr\u003e\n– Bergamont E-Vitess Expert\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-RIBELLE-TQ-HPR50-IT-EN-FR_compressed.pdf?v=1741614595\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"For e-bikes with handlebar control","offer_id":55361769308534,"sku":"SF-TQ-HPR50-RIBELLE-HC","price":269.0,"currency_code":"EUR","in_stock":true},{"title":"For e-bikes without handlebar control","offer_id":55361769341302,"sku":"SF-TQ-HPR50-RIBELLE-NOHC","price":269.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-tq-hpr50-1146044253.png?v=1741935375"},{"product_id":"speedfun-furious-evo-easy-for-tq-hpr50","title":"SpeedFun Furious Evo easy+ for TQ HPR40, TQ HPR50  and TQ HPR60","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for TQ HPR50 is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with a very high active motor. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs.\n\u003cbr\u003e\u003cbr\u003e\nThis tuning kit is compatible with TQ HPR50 motor regardless of the display\/handlebar control installed on the e-bike. When tuning is active, the display (or app) will show the altered speed and km.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo is supplied ready to use, plug and go, can be activated and deactivated as desired and maintains the setting even after the ebike is turned off. It can be easily installed thanks to the original and\/or compatible connectors.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nThis tuning kit is compatible with TQ HPR50 and HPR60 motors regardless of the display\/handlebar control installed on the e-bike.\u003cbr\u003e\u003cbr\u003e\n\nEbike with TQ HPR50 motor where the Furious Evo easy + device has been successfully installed. This list illustrative not exhaustive:\u003cbr\u003e\u003cbr\u003e\n– Trek Fuel EXe 9.9 XX1 AXS\u003cbr\u003e\n– Trek Fuel EXe 9.9 XTR\u003cbr\u003e\n– Trek Domane+ SLR 9 AXS\u003cbr\u003e\n– Trek Domane+ SLR 9\u003cbr\u003e\n– Trek Fuel EXe 9.8 GX AXS\u003cbr\u003e\n– Trek Fuel EXe 9.8 XT\u003cbr\u003e\n– Trek Domane + SLR 7 AXS\u003cbr\u003e\n– Trek Domane+ SLR 6 AXS\u003cbr\u003e\n– Trek Domane+ SLR 7\u003cbr\u003e\n– Trek Fuel EXe 9.7\u003cbr\u003e\n– Trek Domane+ SLR 6\u003cbr\u003e\n– Trek Fuel EXe 9.5\u003cbr\u003e\n– Pinarello Nytro E9 Gravel\u003cbr\u003e\n– Pinarello Nytro E7 Gravel\u003cbr\u003e\n– Pinarello Nytro E5 Gravel\u003cbr\u003e\n– Scott Lumen eRIDE 910\u003cbr\u003e\n– Scott Lumen eRIDE 900\u003cbr\u003e\n– Scott Lumen eRIDE 900 SL\u003cbr\u003e\n– BMC Fourstroke AMP LT\u003cbr\u003e\n– BMC Fourstroke AMP LT one\u003cbr\u003e\n– BMC Fourstroke AMP LT two\u003cbr\u003e\n– BMC Fourstroke AMP LT three\u003cbr\u003e\n– BMC Roadmachine 01 AMP X\u003cbr\u003e\n– Simplon Rapcon Pmax TQ\u003cbr\u003e\n– Mondraker Neat RR\u003cbr\u003e\n– Mondraker Neat R\u003cbr\u003e\n– Fantic Rampage 1.2 Race\u003cbr\u003e\n– Fantic Rampage 1.2 Factory\u003cbr\u003e\n– Fantic Rampage 1.4 Race\u003cbr\u003e\n– Fantic Rampage 1.4 Sport\u003cbr\u003e\n– Fantic Rampage 1.4 Factory\u003cbr\u003e\n– Rotwild R.X275\u003cbr\u003e\n– Bergamont E-Vitess Elite\u003cbr\u003e\n– Bergamont E-Vitess Expert\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-TQ-HPR50-IT-EN-FR_compressed.pdf?v=1741686135\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55365250711926,"sku":"SF-TQ-HPR50-FE","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-tq-hpr50-sf-tq-hpr50-fe-1146185162.png?v=1741935374"},{"product_id":"speedfun-ribelle-for-tq-hpr-120s","title":"SpeedFun Ribelle for TQ HPR 120S","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun RIBELLE is an electronic and intelligent e-bike tuning kit that does not require any external power supply.\n\u003cbr\u003e\u003cbr\u003e\nIt is designed for the TQ HPR 120S motors used on the Haibike Flyon to circumvent the speed block at 25 kmH, allowing to increase its active assistance up to speeds that can exceed 60 KmH  by fully exploiting the potential of the TQ HPR 120S motor.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribelle shows all the real data on the display.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribbele is equipped with a self-learning system to memorize all the parameters of the e-bike on which it is mounted. Therefore, no settings are required.\n\u003cbr\u003e\u003cbr\u003e\nSpeedup Ribbele is mounted in a very simple way by placing it between the speed sensor and the motor and between the display and the motor using original connectors that do not alter the characteristics of electrical resistance and water tightness.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribbele can be activated and deactivated with a sequence of keys (see instructions). Animated feedback is shown on the display whenever the on or off status is changed.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nIt is activated by alternately inserting a sequence on the lever normally used to modulate the assistance level: Down - Up - Down - Up (Left - Right - Left - Right). An animation of the battery levels then appears on the display. A descending sequence indicates that the speed is limited to 25 km\/h (as per the original setting), while an ascending sequence indicates that the speed is unlocked.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nIt is designed for the TQ HPR 120S motors used on the Haibike Flyon.\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-Montaggio-Ribelle-TQ-FLYON-Haibike_compressed.pdf?v=1741687664\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/2N5Uqmh1QiM?si=CfPqCaS1325NEmEH\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55365513052534,"sku":"SF-TQ-HPR120S-RIBELLE","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-tq-hpr-120s-sf-tq-hpr120s-ribelle-1146201554.png?v=1741935372"},{"product_id":"speedfun-ribelle-for-bosch-not-bosch-smart-system","title":"SpeedFun Ribelle for Bosch (not Bosch Smart System)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Ribelle is a ebike tuning for Bosch motor that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to 60 km\/h\n\u003cbr\u003e\u003cbr\u003e\nThe SpeedFun Ribelle ebike tuning for Bosch always shows real data on the display and can be activated or deactivated by pressing a simple sequence of keys directly from the ebike handlebar control. The activation and deactivation of the device is indicated on the display.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribelle for Bosch thanks to its particular operating algorithm comes into operation when 16 km\/h is reached without the cyclist noticing any difference in assistance. It does not intervene in any way at low speeds. This important precaution has been implemented to avoid power losses, failures or “hiccup” operations.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribelle for Bosch  is available in two versions:\n\u003cbr\u003e\n\u003cb\u003e– Standard:\u003c\/b\u003e allows you to unlock the ebike over 25 Km\/h leaving the real data on the display.\u003cbr\u003e\n\u003cb\u003e– Standard plus:\u003c\/b\u003e same functions as the standard version but more:\u003cbr\u003e\nMax speed setting: you can set the max speed after which the motor stops to help.\u003cbr\u003e\n“Anti-theft” function: a sequence of keys can be activated to be entered within 10s of turning on the ebike (each device has its own sequence which is different from all the others). If the sequence is not entered correctly the ebike will turn off and will not assist.\u003cbr\u003e\nTorque curve modification: it is possible to choose between 3 different pre-set levels that modify the motor response.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eImportant notice:\u003c\/b\u003e\u003cbr\u003e\nCOBI display and SmartHub: the Ribelle Plus tuning device is compatible with COBI s SmartHub display but only allows the activation and deactivation of the release, all other features cannot be managed.\u003cbr\u003e\u003cbr\u003e\n“Personalized pedaling\/assistance personalization” mode: the Ribelle tuning device (both standard and plus) is not compatible with this feature offered by Bosch on Nyon displays (including the new Nyon 2021).\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nFrom any of the assistance modes, press the key sequence: minus , plus , minus, plus.\u003cbr\u003e\nA battery level animation appears briefly on the display. Battery fill sequence means unlocked speed. Battery drain sequence means locked speed as in original at 25km\/h.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nThis device is compatible with Intuvia, Purion, Nyon (including new Nyon 2021) and Kiox displays and can be installed on Bosch (BES2) motor:\u003cbr\u003e\n– Gen. 2 (Active, Performance and Performance CX 2014, 2015, 2016, 2017, 2018, 2019 and 2020)\u003cbr\u003e\n– Gen. 3 (Active Line, Active Line Plus 2018, 2019 and 2020)\u003cbr\u003e\n– Gen. 4 (Performance CX and Performance Line 2020 and 2021)\u003cbr\u003e\nSpeedFun Ribelle is a very small device, measuring only 38 x 16.5 x 7.5 mm. It is equipped with original connectors and does not change the characteristics of electrical resistance and water tightness.\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-tuning-SpeedFun-Ribelle-Bosch-compressed.pdf?v=1741692695\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/j7r7Ufw_x68?si=uAZ9ltq7CcFvxGwZ\" frameborder=\"0\" allowfullscreen=\"\" loading=\"lazy\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Standard","offer_id":55365769560438,"sku":"SF-B-BES2-RIBELLE","price":199.0,"currency_code":"EUR","in_stock":true},{"title":"Plus Standard","offer_id":55365769593206,"sku":"SF-B-BES2-RIBELLE+","price":205.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-bosch-not-bosch-smart-system-1146201551.png?v=1741935370"},{"product_id":"speedfun-furious-evo-for-bosch-not-bosch-smart-system","title":"SpeedFun Furious Evo for Bosch (not Bosch Smart System)","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning kit for Bosch is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH, this allows to obtain a real speed with a very high active motor. The maximum speed limit is given by the power of the motor added to the power expressed by one’s legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the device is active, the display will show the exact speed up to about 20 KmH approx, beyond which a manipulated speed will always be shown below 25 KmH.\n\u003cbr\u003e\u003cbr\u003e\nSpeedup Furious Evo can be activated and deactivated and maintains the setting even after the ebike is turned off. It can be installed on e-bikes with any type of display or side control as well as on e-bikes without a display.\n\u003cbr\u003e\u003cbr\u003e\nThe new technology of this tuning module for Bosch does not require the activation of the motor light output or interventions with diagnostics or apps. It is supplied plug and go ready to use and installs in a very simple way thanks to the connectors with which no physical modification of the ebike is necessary.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nThis tuning kit is compatible with Intuvia, Purion, Nyon, Kiox, Cobi and Smart Hub displays and can be installed on Bosch Gen. 1 (Bosch Classic), Gen. 2 (Active, Performance and Performance CX 2014, 2015, 2016, 2017, 2018, 2019 and 2020), Gen. 3 (Active Line, Active Line Plus 2018, 2019 and 2020) and Gen. 4 (Performance CX and Performance Line 2020 and 2021).\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNot compatible with Bosch Smart System\u003c\/b\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Furious-Evo-Shim-Bosch-Istruzioni_compressed.pdf?v=1741701745\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55366350274934,"sku":"SF-B-BES2-FE","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-for-bosch-not-bosch-smart-system-sf-b-bes2-fe-1146359080.jpg?v=1741935369"},{"product_id":"speedfun-furious-evo-easy-for-motinova-volans-and-motinova-pegasi","title":"SpeedFun Furious Evo easy+ for Motinova Volans and Motinova Pegasi","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo for Motinova Volans and Motinova Pegasi tuning device is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH, this allows to obtain a real speed with a very high active engine. The maximum speed limit is given by the power of the motor added to the power expressed by one’s legs\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\n- Turn off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet).\u003cbr\u003e\n- Give a strong pedal stroke (only one). Let the wheel spin over 30 km \/ h for a few seconds.\u003cbr\u003e\nThe system recognizes the rotation acceleration and interprets it as a command to activate or deactivate cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nSpeedFun Furious Evo can be installed on ebikes with Motinova Volans and Motinova Pegasi motors regardless of the type of display or side control of the ebike.\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-Easy-Motinova-Volans-Pegasi-IT-EN-FR_compressed.pdf?v=1745496782\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"White Connector","offer_id":56773493162358,"sku":"SF-MOTINOVA-FE-WHITE","price":139.0,"currency_code":"EUR","in_stock":true},{"title":"Black Connector","offer_id":56773493195126,"sku":"SF-MOTINOVA-FE-BLACK","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/SpeedFun-ebike-tuning-Furious-Evo-Motinova-Volans-Motinova-Pegasi_product_resized-scaled-uai-1440x1153.jpg?v=1745496208"},{"product_id":"speedfun-furious-evo-easy-for-bosch-performance-line-active-line-and-active-line-plus-gen-3-smart-system-with-rim-magnet","title":"SpeedFun Furious Evo easy+ for Bosch Performance Line, Active Line and Active Line Plus (gen. 3) Smart System with Rim Magnet","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun Furious Evo easy + is a tuning for ebike equipped with a Bosch Smart System motor that allows you to remove the 25 km\/h speed block.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line, Active Line and Active Line Plus (gen. 3) motors equipped with a magnet on the valve (Bosch Rim Magnet) with LED Remote\/System Controller command (also compatible with Led Remote + Kiox 300\/500, Intuvia 100, Purion 400 or System Controller + Mini Remote) or Purion 200.\n\u003cbr\u003e\u003cbr\u003e\n\n\u003ch3\u003eHow does Speedfun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eActivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).\u003cbr\u003e\n- Position the left pedal at 11:00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the tuning kit that I need?\u003c\/h3\u003e\nThis speed release device is compatible only and exclusively with Bosch Performance Line, Active Line and Active Line Plus (gen. 3) motors equipped with a magnet on the valve (Bosch Rim Magnet) with LED Remote\/System Controller command (also compatible with Led Remote + Kiox 300\/500, Intuvia 100, Purion 400 or System Controller + Mini Remote) or Purion 200.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eATTENTION!\u003c\/b\u003e\u003cbr\u003e\nThis device is not compatible with ebikes equipped with a “classic” magnet on the spokes or brake disc \u003cbr\u003e\nThis device is not compatible with ebikes equipped with the Bosch ABS system.\u003cbr\u003e\nThis device is not compatible with ebikes equipped with a GPS system (Bosch ConnectModule).\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\nIf you are planning to install Speedfun on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-BOSCH-RIM-MAGNET-Gen-3-IT-EN-FR_compressed.pdf?v=1750918391\" class=\"btn\" target=\"_blank\"\u003eInstallation Guide PDF \u003c\/a\u003e \u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use Speedfun products. Electric bikes equipped with Speedfun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Speedfun  products can be used exclusively on private property and entirely at one’s own risk. The use of Speedfun may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\nSpeedfun Products are thoroughly tested and we stand by their quality. \nSpeedfun provide 1 year warranty to all their Products!","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55828509720950,"sku":"TWE-SF-B-SM-GEN3-RIM","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-bosch-performance-line-cx-gen-4-smart-system-with-rim-magnet-twe-sf-b-sm-rim-1145465792.jpg?v=1741935481"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/collections\/Speedfun_tuning_kit.png?v=1694591239","url":"https:\/\/www.twowheelsempire.com\/en-lt\/collections\/speedfun.oembed","provider":"Two Wheels Empire","version":"1.0","type":"link"}