{"product_id":"peartune-mso-4-0-for-brose-specialized-2-0-2-1-2-2-motors-2021-2022","title":"Peartune MSO 4.0 For Brose Specialized Turbo Levo 2.0 |2.0E | 2.1 | 2.2 Motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThis Peartune tuning kit removes the 16mph (25km\/h) speed limit, allowing the motor to help you at higher speeds. With the speed limit removed, 28-37mph (~45-60km\/h) can be expected, depending on the bicycle and gearing.\n\u003cbr\u003e\u003cbr\u003e\nAll readings like actual speed, max speed, average speed, distance etc. are correctly displayed.\n\n\u003ch3\u003eHow does the Peartune work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe tuning kit can be activated directly on your bike’s display. After pressing the \u003cb\u003e'WALK' or '+ - + -' buttons\u003c\/b\u003e, from now on you will be able to ride at a speed of 25 mph (40 km\/h), 31 mph (50 km\/h) and even more than 37 mph (60 km\/h). Or one long press of the '+' button in the case of 2.0E Vado. \n\u003cbr\u003e\u003cbr\u003e\nTo deactivate the tuning kit, press the 'WALK' or '+ - + -' buttons again. Your e-bike will then work the same as before installation of the chip.\n\u003cbr\u003e\u003cbr\u003e\nWith the new PearTune 4.0, you can set whether the tuning should automatically be ON or OFF when the e-bike is switched on.\n\u003cbr\u003e\u003cbr\u003e\nThe level of maximum motor support can be set individually with the + and - buttons, in 1mph (1 km\/h) steps.\n\u003cbr\u003e\u003cbr\u003e\nChip lock (\"Lock the Chip\" function): A feature that makes the tuning module virtually invisible. If the chip lock is activated by using the + and - buttons at the control element, the tuning chip is locked on the software side so that no one can recognize that a tuning tool has been installed on the e-bike. This means that the e-bike and display will function normally, and the tuning can no longer be switched on.\nThe chip lock can only be deactivated later, and again with a specific + and - key combination.\n\u003cbr\u003e\u003cbr\u003e\nWith PearTune 4.0 you can set an individual activation code. When switching on and off, the display briefly shows whether the tuning was actually activated or deactivated for confirmation.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/PT-MSO-Service-Menu.pdf?v=1694417736\" class=\"btn\" target=\"_blank\"\u003eService menu manual\u003c\/a\u003e\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eService menu video:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/mcyK7NXjML8\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eHow to use Peartune Service Menu?\u003c\/h3\u003e\nThe PearTune MSO 4.0 can be activated or deactivated anytime during the ride by short-pressing the LIGHT\/WALK button or [+ -]  buttons. Original function of these buttons remains unchanged. After activating PearTune - you will be able to ride at a speed of 25 mph (40 km\/h), 31 mph (50 km\/h) and even more than 37 mph (60 km\/h)!\n\u003cbr\u003e\u003cbr\u003e\nSpecialized:\nActivation: ONE short press of WALK button and\/or [+ - + -] buttons, or [- + - +], or [+ + - -]or [- - + +] \/ (↑ ↓↑ ↓) buttons or ONE LONG press of +\nIndication: displayed number 9.9\/4.0 for few seconds after activation\/deactivation (or equivalent in miles)\n\u003cbr\u003e\u003cbr\u003e\nBosch:\nActivation: ONE short press of WALK button and\/or [+ - + -] buttons, or [- + - +], or [+ + - -]or [- - + +] \/ (↑ ↓↑ ↓) buttons\nIndication: displayed number 9.9\/2.5 for few seconds after activation\/deactivation (or equivalent in miles)\n\u003cbr\u003e\u003cbr\u003e\nBosch Smart System: \nActivation: ONE short press of WALK button and\/or [+ - + -] buttons, or [- + - +], or [+ + - -]or [- - + +]\nIndication: displayed number around 19.0\/12.0 for few seconds after activation\/deactivation (or equivalent in miles)\n\u003cbr\u003e\u003cbr\u003e\nBrose:\nActivation: ONE short press of LIGHT button or TWO short press of LIGHT button and\/or [+ - + -] buttons, or [- + - +], or [+ + - -]or [- - + +] \/ (↑ ↓↑ ↓) buttons\nIndication: displayed number 9.9\/2.5 for few seconds after activation\/deactivation (or equivalent in miles)\n\u003cbr\u003e\u003cbr\u003e\nGiant:\nActivation: ONE short press of WALK button and\/or [+ - + -] buttons, or [- + - +], or [+ + - -]or [- - + +] \/ (↑ ↓↑ ↓) buttons\nIndication: displayed number 9.9\/2.5 for few seconds after activation\/deactivation (or equivalent in miles)\n\u003cbr\u003e\u003cbr\u003e\nGiant Ridecontrol GO:\nActivation: ONE short press of WALK button and\/or [+ - + -] buttons, or [- + - +], or [+ + - -]or [- - + +] \/ (↑ ↓↑ ↓) buttons\nIndication: displayed number 9.9\/2.5 for few seconds after activation\/deactivation (or equivalent in miles)\n\u003cbr\u003e\u003cbr\u003e\nYamaha PW-X3 PW-S2:\nActivation: TWO short press of LIGHT button\nIndication: displayed number 9.9\/2.5 for few seconds after activation\/deactivation (or equivalent in miles)\nInterfaceX no indication, only if any App for Yamaha e-bikes avalaible\u2028\u2028Yamaha PW-X\/SE\/TE\/X2\/CE\/ST\u2028Activation: TWO short presses of the LIGHT button\nIndication: displayed number 9\/2 for few seconds after activation\/deactivation (or equivalent in miles)\n\u003cbr\u003e\u003cbr\u003e\nTQ Flyon:\nActivation: ONE short press of LIGHTS button and\/or [+ - + -] buttons, or [- + - +], or [+ + - -]or [- - + +] \/ (↑ ↓↑ ↓) buttons\nIndication: displayed number 9.9\/2.5 for few seconds after activation\/deactivation (or equivalent in miles)\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/PearTune_MSO_manual_for_Service_menu_of_the_chip_EN_2024-01-05.pdf?v=1704438829\" class=\"btn\" target=\"_blank\"\u003eService menu manual\u003c\/a\u003e\u003c\/div\u003e\n\n\u003ch3\u003eIs this Peartune the right tuning kit for my bike?\u003c\/h3\u003e\nThis Peartune tuning kit is made to fit Specialized 2.0E \/ 2.1 \/ 2.2 motors with TCU, MasterMind and Mission Control displays\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us. \n\u003cbr\u003e\u003cbr\u003e\nIf you are planning to install Peartune on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.\n\n\u003cbr\u003e\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/-phWOTEzYuU\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides Lifetime warranty to all their products.","brand":"PearTune","offers":[{"title":"Default Title","offer_id":40060146811014,"sku":"PT-MSO-4.0-SP2.0E\/2.1\/2.2","price":239.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/products\/peartune-mso-4-0-for-brose-specialized-2-0-2-1-2-2-year-2021-2025-pt-mso-4-0-sp2-0e-2-1-2-2-1145467961.jpg?v=1741936167","url":"https:\/\/www.twowheelsempire.com\/en-lt\/products\/peartune-mso-4-0-for-brose-specialized-2-0-2-1-2-2-motors-2021-2022","provider":"Two Wheels Empire","version":"1.0","type":"link"}