{"product_id":"peartune-mso-4-0-for-giant-2017","title":"PearTune MSO 4.0 for Giant Syncdrive Sport \/ Pro \/ Life \/ Core motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe PearTune MSO 4.0 is a revolutionary tuning kit that suppresses the speed limiter of your\nelectric bike.\n\u003cbr\u003e\u003cbr\u003e\nAfter installing and activating your PearTune, the display will show actual values such as\nmaximum speed, average speed, daily distance traveled, and range. You can reach unlimited\nspeeds.\n\u003cbr\u003e\u003cbr\u003e\nThe display is not necessary to enjoy your new speed limit with PearTune. Once activated, the\ntuning kit supports speeds up to 99 km\/h (approximately 61.5 mph)! To be able to use all the\nfunctions of the tuning, the display of the total kilometers and the speed is required. If your\ne-bike does not have a display, you can retrofit the Ride Dash Plus, for example.\nNOTE: Do not use the Ride Control app as a display, as this app may prompt you to update the\nsoftware.\n\n\u003ch3\u003eHow does Peartune work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to\npedaling speed. This ensures smooth motor control without interruptions from speed limits.\nHowever, the achievable speed largely depends on the eBike model. The achievable speed can be calculated using a simple formula:\n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1,000,000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nThe tuning kit can be activated directly on your bike’s controllers. After pressing the activation\nbuttons, you will be able to ride at speeds of 25 mph (40 km\/h), 31 mph (50 km\/h), and even\nmore than 37 mph (60 km\/h).\n\u003cbr\u003e\u003cbr\u003e\nActivation involves one short press of the WALK button and\/or the [+ - + -], [- + - +], [+ + - -], or [- - + +] \/ (↑ ↓↑ ↓) buttons.\n\u003cbr\u003e\u003cbr\u003e\nIndication of activation\/deactivation is a displayed number, 9.9\/2.5 kph for a few seconds (or\nequivalent in mph).\n\u003cbr\u003e\u003cbr\u003e\nTo deactivate the tuning kit, press the same buttons again. Your e-bike will then operate as it did before the chip's installation.\n\u003cbr\u003e\u003cbr\u003e\nWith the new PearTune 4.0, you have greater control over your tuning kit than ever before. It\noffers features such as:\n\u003cul\u003e\n\u003cli\u003eAdjustable speed limit in preferred range settings\u003c\/li\u003e\n\u003cli\u003eChip lock settings\u003c\/li\u003e\n\u003cli\u003eOn\/Off or always ON settings\u003c\/li\u003e\n\u003cli\u003eTraveled distance calculation settings\u003c\/li\u003e\n\u003cli\u003eChip reset settings\u003c\/li\u003e\n\u003cli\u003ePreferred button for activation\/deactivation settings\u003c\/li\u003e\n\u003cli\u003eChip software version information settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to use Peartune Service Menu?\u003c\/h3\u003e\nBy default, PearTune MSO 4.0 is set to activation\/deactivation mode. The maximum speed is on\nunlimited settings, and activation\/deactivation can be done by pressing the WALK button or [+ -\n+ -] (starting from the highest assistance level, begin with [-]).\n\u003cbr\u003e\u003cbr\u003e\nTo change settings to your preference, download the latest chip service menu and follow the\nCHIP SERVICE MENU CONTROL PROCEDURE to enter the desired section.\n\u003cbr\u003e\u003cbr\u003e\nIf you need any help adjusting your settings, feel free to contact us. We're here to assist every\nstep of the way.\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/PearTune_MSO_manual_for_Service_menu_of_the_chip_EN_2024-01-05.pdf?v=1704438829\" class=\"btn\" target=\"_blank\"\u003eService menu manual\u003c\/a\u003e\u003c\/div\u003e\n\n\u003ch3\u003eWhich Peartune Tuning Kit do I need?\u003c\/h3\u003e\n\u003cb\u003eCompatible with motor: \u003c\/b\u003eGiant SyncDrive Sport \/ Pro \/ Life \/ Core drive systems from model year 2017 with displays EVO, EVO-SG, CHARGE, and PLUS along with control units ONE, DASH 2 IN 1-SG, ERGO-SG, and ERGO2-SG.\n\u003cbr\u003e\u003cbr\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/PRO_Core_Sport_Life.png?v=1713184330\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Giant_Displays.jpg?v=1713182718\" class=\"img-fluid\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNot Compatible with:\u003c\/b\u003e\u003cbr\u003e\nAll original Yamaha motors (PW, PW-X, PW-X2, PW-X3, PW-SE, PW-TE, PW-ST); you\nwould need \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/all\/products\/peartune-mso-4-0-for-yamaha-pw-se-pw-x-pw-te-pw-st-pw-x2-motors\" target=\"_blank\"\u003e PearTune 4.0 for Yamaha.\u003c\/a\u003e\n\u003cbr\u003e \nGiant SyncDrive motors before model year 2017.\n\u003cbr\u003e\nSyncDrive Pro2 from model year 2022 onwards; you would need \u003ca href=\"https:\/\/www.twowheelsempire.com\/collections\/all\/products\/peartune-mso-4-0-for-giant-ridecontrol-go\"\u003ePearTune MSO 4.0 for Giant Syncdrive Pro2 \/ Sport2 + RideControl GO\u003c\/a\u003e\n\n\u003ch3\u003eHow to install this Tuning kit?\u003c\/h3\u003e\nWhen connecting the PearTune tuning kit to an e-bike, you will find matching connectors to\nmake the installation very simple.\u003cbr\u003e\u003cbr\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Giant_SyncDrive.jpg?v=1713183335\"\u003e\n\u003cbr\u003e\u003cbr\u003e\nIf you are planning to install Peartune on a brand-new bike, make sure you ride it for at least 0.6\nmiles (1 km) before the chip is activated.\u003cbr\u003e\n1. Remove the plastic cover of the central drive from below. Connectors and cables are\nlocated under the engine.\u003cbr\u003e\n2. Disconnect the eight-pin connector between the display and the engine body and the\nthree-pin connector between the speed sensor and the engine body.\u003cbr\u003e\n3. Connect all four corresponding connectors on the MSO to the corresponding connectors\non the e-bike. All connectors are equipped with locks to prevent incorrect connections.\u003cbr\u003e\n4. Place the MSO in a suitable position, ensuring that cables are not bent or pinched when\nclosing the motor.\u003cbr\u003e\n\u003cbr\u003e\nIf you encounter any difficulties with installation or disassembly, do not hesitate to contact us.\n\n\u003ch3\u003eImportant Legal Note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.\n\u003cbr\u003e\u003cbr\u003e\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.\n\u003cbr\u003e\u003cbr\u003e\nPeartune products are thoroughly tested and we stand by their quality - Peartune provides Lifetime warranty to all their products.","brand":"PearTune","offers":[{"title":"Default Title","offer_id":40269416366214,"sku":"PT-MSO-4.0-G2","price":219.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/peartune-mso-4-0-for-giant-syncdrive-sport-pro-life-core-motors-pt-mso-4-0-g2-1145467413.png?v=1741935842","url":"https:\/\/www.twowheelsempire.com\/en-lt\/products\/peartune-mso-4-0-for-giant-2017","provider":"Two Wheels Empire","version":"1.0","type":"link"}