{"product_id":"speedfun-furious-evo-easy-for-dapu-md250s-motors","title":"SpeedFun Furious Evo easy+ for Dapu MD250S motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nThe function of the Furious Evo tuning device for Dapu MD250S is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs.\n\u003cbr\u003e\u003cbr\u003e\nWhen the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. Compatible with Dapu MD250S motor mainly used by Cortina, Ekletta and many other.\n\u003cbr\u003e\u003cbr\u003e\nThe Furiosu Evo for Dapu MD250S tuning device can be activated\/deactivated in a very practical system (for more information see the instructions). The device is supplied plug and go ready to use and is installed in a very simple way thanks to the original connectors with which no physical modification of the ebike is necessary.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eCaution\u003c\/b\u003e\u003cbr\u003e\nThis device is compatible only and exclusively with ebikes equipped with a Dapu MD250S motor. Check the connectors before buying, if they don’t match the ones in the photo you probably have a Dapu MD250. You can find the correct product \n\u003ca href=\"\/en-lt\/products\/speedfun-furious-evo-easy-for-dapu-md250-motors\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \n\u003cbr\u003e\u003cbr\u003e\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\u003cbr\u003e- It is supplied ready to use in \"ALWAYS ON\" mode and cannot be deactivated.\u003cbr\u003e\n- If you want to be able to activate and deactivate the speed release function, you need to cut\/interrupt the jumper at the point indicated by the arrow (insulate both ends!). There is no way back after this. Read the activation and deactivation methods on the instructions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIMPORTANT Activation and deactivation:\u003c\/b\u003e\u003cbr\u003e\n- Turn Off the ebike.\u003cbr\u003e\n- Place the chain on the longest gear (the smallest rear sprocket).v\n- Position the left pedal at 11.00. From now on, do not turn the rear wheel.\u003cbr\u003e\n- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).\u003cbr\u003e\n- Raise the rear wheel, give a strong pedal. Let the wheel spin over 30 km\/h for a few seconds.\u003cbr\u003e\nThe system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.\n\n\u003ch3\u003eIs this the right tuning kit for my e-bike?\u003c\/h3\u003e\nSpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. Compatible with Dapu MD250S motor mainly used by Cortina, Ekletta and many other.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\nThis device is compatible only and exclusively with ebikes equipped with a Dapu MD250S motor. Check the connectors before purchasing, if they do not match those in the photo you probably have a Dapu MD250. You can find the correct product  \u003ca href=\"\/en-lt\/products\/speedfun-furious-evo-easy-for-dapu-md250-motors\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003cbr\u003e\u003cbr\u003e\nEbike with Dapu MD250S motor where the Furious Evo easy+ device has been successfully installed (this list is illustrative and not exhaustive)\u003cbr\u003e\n– Ekletta Bumpy\u003cbr\u003e\n– Rock Machine e-bike storm E70 29″\u003cbr\u003e\n– Rock Machine e-bike Storm INT e90-29\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-FURIOUS-EVO-EASY-DAPU-MD250S-IT-EN-FR_compressed.pdf?v=1741257186\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55344642949494,"sku":"SF-DAPU-MD250S","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-furious-evo-easy-for-dapu-md250s-motors-sf-dapu-md250s-1145465282.png?v=1741935398","url":"https:\/\/www.twowheelsempire.com\/en-lt\/products\/speedfun-furious-evo-easy-for-dapu-md250s-motors","provider":"Two Wheels Empire","version":"1.0","type":"link"}