{"product_id":"speedfun-ribelle-for-tq-hpr-120s","title":"SpeedFun Ribelle for TQ HPR 120S","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nSpeedFun RIBELLE is an electronic and intelligent e-bike tuning kit that does not require any external power supply.\n\u003cbr\u003e\u003cbr\u003e\nIt is designed for the TQ HPR 120S motors used on the Haibike Flyon to circumvent the speed block at 25 kmH, allowing to increase its active assistance up to speeds that can exceed 60 KmH  by fully exploiting the potential of the TQ HPR 120S motor.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribelle shows all the real data on the display.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribbele is equipped with a self-learning system to memorize all the parameters of the e-bike on which it is mounted. Therefore, no settings are required.\n\u003cbr\u003e\u003cbr\u003e\nSpeedup Ribbele is mounted in a very simple way by placing it between the speed sensor and the motor and between the display and the motor using original connectors that do not alter the characteristics of electrical resistance and water tightness.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribbele can be activated and deactivated with a sequence of keys (see instructions). Animated feedback is shown on the display whenever the on or off status is changed.\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nIt is activated by alternately inserting a sequence on the lever normally used to modulate the assistance level: Down - Up - Down - Up (Left - Right - Left - Right). An animation of the battery levels then appears on the display. A descending sequence indicates that the speed is limited to 25 km\/h (as per the original setting), while an ascending sequence indicates that the speed is unlocked.\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nIt is designed for the TQ HPR 120S motors used on the Haibike Flyon.\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-Montaggio-Ribelle-TQ-FLYON-Haibike_compressed.pdf?v=1741687664\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp class=\"text-center fw-bold\"\u003eInstallation Guide:\u003c\/p\u003e\n\u003cdiv style=\"padding-bottom:56.25%; position:relative; display:block; width: 100%\"\u003e\n    \u003ciframe width=\"100%\" height=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/2N5Uqmh1QiM?si=CfPqCaS1325NEmEH\" frameborder=\"0\" allowfullscreen=\"\" style=\"position:absolute; top:0; left: 0\"\u003e\n    \u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"Default Title","offer_id":55365513052534,"sku":"SF-TQ-HPR120S-RIBELLE","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-tq-hpr-120s-sf-tq-hpr120s-ribelle-1146201554.png?v=1741935372","url":"https:\/\/www.twowheelsempire.com\/en-lt\/products\/speedfun-ribelle-for-tq-hpr-120s","provider":"Two Wheels Empire","version":"1.0","type":"link"}