{"product_id":"speedfun-ribelle-for-tq-hpr50","title":"SpeedFun Ribelle for TQ HPR50 \/ TQ HPR 60 motors","description":"\u003ch3\u003eWhat does this Tuning Kit do?\u003c\/h3\u003e\nWhat is the SpeedFun Ribelle ebike tuning kit for TQ HPR50 TQ HPR 60?\nSpeedFun Ribelle is a tuning for ebikes with TQ HPR50 motor that allows you to increase the speed of the ebike by removing the block set at 25 kmH. With SpeedFun Ribelle, active assistance is increased up to speeds that can exceed 60 kmH (info), making full use of the mtors potential.\n\u003cbr\u003e\u003cbr\u003e\nThis speed release device for ebikes is designed for TQ HPR50 TQ HPR 60 motor regardless of the display installed on the ebike. This system is mostly used on Trek, Pinarello, BMC, Simplon, Mondraker, Fantic brand ebikes and many others.\n\u003cbr\u003e\u003cbr\u003e\nThe SpeedFun Ribelle ebike tuning shows all the real data on the display\/app and can be activated or deactivated by pressing a simple sequence of buttons directly from the ebike handlebar control or on display. The activation and deactivation of the device is indicated on the display. The release device is supplied with original connectors for quick and easy installation.\n\u003cbr\u003e\u003cbr\u003e\nSpeedFun Ribelle for TQ HPR50 TQ HPR 60 is available in two versions:\n\u003cbr\u003e\u003cbr\u003e\n– \u003cb\u003eVersion for ebikes with control on the handlebars:\u003c\/b\u003e compatible only and exclusively with ebikes equipped with a control to select the level of assistance on the handlebars\u003cbr\u003e\n– \u003cb\u003eVersion for ebikes without control on the handlebar:\u003c\/b\u003e compatible only and exclusively with ebikes without control to select the level of assistance on the handlebar (assistance selection only from HPR Display)\u003cbr\u003e\n\n\u003ch3\u003eHow does the SpeedFun work?\u003c\/h3\u003e\nThe tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula: \u003cbr\u003e\u003cbr\u003e\n\nSpeed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth \/ Rear Chainring Teeth * 60 [min\/h] \/ 1.000.000 [mm\/km]\n\u003cbr\u003e\u003cbr\u003e\n\nAfter installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated \/ deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike. \n\u003cbr\u003e\u003cbr\u003e\nIMPORTANT Activation and deactivation:\u003cbr\u003e\nTo activate or deactivate motor support above 25 km\/h it is necessary to type a different sequence depending on the variant of Ribelle device installed.\u003cbr\u003e\u003cbr\u003e\nWith Ribelle for Ebike WITH Control on the Handlebar: type the key sequence: - + - + (minus, plus, minus, plus).\u003cbr\u003e\u003cbr\u003e\nWith Ribelle for Ebike WITHOUT Control on the Handlebar: select assistance OFF and then UP, UP, UP.\u003cbr\u003e\u003cbr\u003e\nIf the procedure is successful, the following animation will be displayed on the speedometer:\u003cbr\u003e\n- If the speedometer rises from 1.1 km\/h to 9.0 km\/h, Ribelle is activated and the motor supports you even above 25 km\/h.\u003cbr\u003e\n- If the speedometer drops from 9.0 km\/h to 1.0 km\/h, Ribelle is deactivated and the motor supports you up to 25 km\/h.\u003cbr\u003e\nType the sequence without pauses. If necessary repeat the procedure\u003cbr\u003e\n\n\u003ch3\u003eIs this tuning kit right for my e-bike?\u003c\/h3\u003e\nCompatible with TQ HPR50 TQ HPR 60 motors only.\u003cbr\u003e\nE-bike with TQ HPR50 motor where the Ribelle device has been successfully installed this list is illustrative and not exhaustive:\u003cbr\u003e\u003cbr\u003e\n– Trek Fuel EXe 9.9 XX1 AXS\u003cbr\u003e\n– Trek Fuel EXe 9.9 XTR\u003cbr\u003e\n– Trek Domane+ SLR 9 AXS\u003cbr\u003e\n– Trek Domane+ SLR 9\u003cbr\u003e\n– Trek Fuel EXe 9.8 GX AXS\u003cbr\u003e\n– Trek Fuel EXe 9.8 XT\u003cbr\u003e\n– Trek Domane + SLR 7 AXS\u003cbr\u003e\n– Trek Domane+ SLR 6 AXS\u003cbr\u003e\n– Trek Domane+ SLR 7\u003cbr\u003e\n– Trek Fuel EXe 9.7\u003cbr\u003e\n– Trek Domane+ SLR 6\u003cbr\u003e\n– Trek Fuel EXe 9.5\u003cbr\u003e\n– Pinarello Nytro E9 Gravel\u003cbr\u003e\n– Pinarello Nytro E7 Gravel\u003cbr\u003e\n– Pinarello Nytro E5 Gravel\u003cbr\u003e\n– Scott Lumen eRIDE 910\u003cbr\u003e\n– Scott Lumen eRIDE 900\u003cbr\u003e\n– Scott Lumen eRIDE 900 SL\u003cbr\u003e\n– BMC Fourstroke AMP LT\u003cbr\u003e\n– BMC Fourstroke AMP LT one\u003cbr\u003e\n– BMC Fourstroke AMP LT two\u003cbr\u003e\n– BMC Fourstroke AMP LT three\u003cbr\u003e\n– BMC Roadmachine 01 AMP X\u003cbr\u003e\n– Simplon Rapcon Pmax TQ\u003cbr\u003e\n– Mondraker Neat RR\u003cbr\u003e\n– Mondraker Neat R\u003cbr\u003e\n– Fantic Rampage 1.2 Race\u003cbr\u003e\n– Fantic Rampage 1.2 Factory\u003cbr\u003e\n– Fantic Rampage 1.4 Race\u003cbr\u003e\n– Fantic Rampage 1.4 Sport\u003cbr\u003e\n– Fantic Rampage 1.4 Factory\u003cbr\u003e\n– Rotwild R.X275\u003cbr\u003e\n– Bergamont E-Vitess Elite\u003cbr\u003e\n– Bergamont E-Vitess Expert\u003cbr\u003e\n\n\u003ch3\u003eHow to Install this tuning kit?\u003c\/h3\u003e\nWhen connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.\n\u003cbr\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/Istruzioni-RIBELLE-TQ-HPR50-IT-EN-FR_compressed.pdf?v=1741614595\" target=\"_blank\" class=\"btn\"\u003eInstallation guide PDF\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eImportant legal note!\u003c\/h3\u003e\nPlease note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.\n\u003cbr\u003e\u003cbr\u003e\nThe use of SpeedFun may void the warranty of your ebike.\nWe strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.","brand":"SpeedFun","offers":[{"title":"For e-bikes with handlebar control","offer_id":55361769308534,"sku":"SF-TQ-HPR50-RIBELLE-HC","price":269.0,"currency_code":"EUR","in_stock":true},{"title":"For e-bikes without handlebar control","offer_id":55361769341302,"sku":"SF-TQ-HPR50-RIBELLE-NOHC","price":269.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/1515\/0434\/files\/speedfun-ribelle-for-tq-hpr50-1146044253.png?v=1741935375","url":"https:\/\/www.twowheelsempire.com\/en-lt\/products\/speedfun-ribelle-for-tq-hpr50","provider":"Two Wheels Empire","version":"1.0","type":"link"}