VOLspeed V2 Tuning Kit Compatible with all Giant Syncdrive Sport / Pro ebikes drive systems from model year 2017 onwards with RideControl EVO, CHARGE or ONE
VOLspeed V2 compatible with the following Giant Syncdrive Sport / Pro ebikes drive systems from model year 2017 onwards with RideControl EVO, CHARGE or ONE.
The tuning kit can be activated directly on your eBike’s display or control. Before the first use of the tuning module or after conversion to another bike the setup must always be carried out first. The Set up is by pressing „arrow down“ twice, afterwards „arrow up“ twice and „arrow down“ twice again. And you will see a 6.8 mph (11.1 kmh) speed display - it will show that the tuning kit is activated. You will find detailed instruction together with your tuning kit.
Next time when you turn On your eBike you would need only to activate the tuning kit by pressing Arrows Down and UP ‘ ↓↑↓↑’. You will find detailed instruction with your tuning kit.
Speed limit is displayed for 5 seconds. You can change the max speed you want to ride by pressing "arrow up" or "arrow down". You will find detailed instruction with your tuning kit.
Speed limits will be removed and you will be able to ride up to 61mph ( 99 km/h). If you raise the level of engine support only slightly, e.g. from 16mph to 21mph (25 km/h to 35 km/h), you can still drive very sporty, but at the same time benefit from moderate battery consumption.
After the dongle is installed, your eBike display will show real data, such as maximum and average speeds, daily mileage and cruising range.
If your eBike manufacturer speed limit is set up to 16mph (25 km/h) tuning kit will increase the speed limit up to 62 mph (99 km/h). If it is set 20mph (32 km/h) or 28mph (45 km/h) this tuning kit will not work with your eBike.
Note about eBikes with RideControl ONE. The settings of the VOLspeed module can usually be made very easily using the control buttons of the eBike. But eBikes with RideControl ONE are an exception: Since the ONE has no display, the settings of the module can only be made via the RideControl App. To be precise, the RideControl App is required for the setup of the tuning and for setting the speed limit. Alternatively, the Giant RideControl PLUS display can be used.
Adjustable dynamic mode with reduced "wall effect" – that means the motor support does not stop so abruptly anymore when the maximum speed is reached. The result is a more pleasant driving experience, as you can drive with much more constant pedal force.
Please be aware that the Tuning kit does not add extra power to your eBike motor. It only removes speed limits and enables you to ride as fast as you can pedal.
The box is splash-proof. All the tuning kits are carefully tested before sending it out to You.
Will VOLspeed V2 for Giant work with my eBike?
VOLspeed V2 compatible with the following Giant Syncdrive Sport / Pro
- This tuning module is compatible with E-Bikes or pedelecs with Giant Syncdrive Sport and Pro drive systems from model year 2017 onwards, the module works in combination with RideControl EVO, CHARGE or ONE.
- Compatible with remote control units from 2017 onwards.
- Not compatible with remote until 2016.
- Note about RideControl ONE: As RideControl ONE does not have a display, the RideControl App is required for the initial setup of the tuning and for setting the maximum supported speed.
We have prepared a detailed video to make installation easy for you. The device is installed invisibly on the drive motor from the outside. The installation is done with a little technical skill in 15-30 minutes. No cables have to be damaged or modified, the module is simply plugged in. The module is absolutely watertight because all of the electronics are encapsulated.
Tools required (using the example of a Full E+ 0 Pro). Please note that the required tools may differ for other eBike models. You can find detailed installation and operating instructions in the video below and instructions added below.
- Torx key TX20 / TX25 / TX30
- Allen key 6 mm
- Lockring tool for Giant / Yamaha PW-X
- ISIS crank puller
- Chain whip (optional)
VOLspeed V2 for Giant assembly video
If you have any troubles with installation or disassembly, do not hesitate to contact us.
If You are planning to install VOLspeed on brand-new eBike, make sure you ride it for at least 0.6miles (1km) before the Tuning Kit is activated.
All purchases will be dispatched the next day, if you will buy Your VOLspeed till 12 o'clock we will be dispatched on the same day.
First class, Tracked, 24 - 48hours Free delivery in the UK Mainland.
Free delivery within 3-5 business days in the EU and 7-10 business days in Rest of the World.
We can offer you Express delivery Worldwide for some extra Charge.
Two Wheels Empire is an official Partner of VOLspeed, buy with confidence from a trusted seller on eBay.
In the event you purchase the incorrect item, we offer 30 days returns policy. Please ensure that the item is returned unopened and use a tracked delivery service.
VOLspeed Products are thoroughly tested and we stand by their quality.
If You have any questions, please do not hesitate to contact us.
Thank you for looking!
Two Wheels Empire Team
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of VOLspeed products. Electric bikes equipped with VOLspeed products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with VOLspeed products can be used exclusively on private property and entirely at one’s own risk. The use of VOLspeed may void the warranty of your eBike.
We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.
- Dimensions: 1.46" x 0.75" x 0.35" (3,7cm x 1,9cm x 0,9cm)
- Cable length: 5.5" (14cm)
- Weight: 0.88oz (0,025kg)
- Supply voltage: 5VDC
- Power consumption: 0,2W
Scope of delivery
- VOLspeed V2 tuning module for Giant E Bikes
- Installation and operating manual
- 2 cable ties