VOLspeed V2 Tuning Kit Compatible with all Yamaha PW-X / PW-X2 / PW-SE / PW-ST / PW-TE V2
VOLspeed V2 compatible with the following Yamaha motors PW-X / PW-X2 / PW-SE / PW-ST / PW-TE V2
The tuning kit can be activated directly on your eBike’s display or control. Before the first use of the Tuning Kit the setup must always be carried out first. The Set Up is by pressing ‘Arrows ↑ ↓ Up and Down’. You will find detailed instruction with your tuning kit.
Activation (model year 2018) - press ‘↑ ’ and hold in 2 seconds, Speed limit is displayed for 5 seconds. You can change the max speed you want to ride by pressing "arrow up" or "arrow down". You will find detailed instruction with your tuning kit.
Activation (model year 2019/2020) - choose the HIGH riding mode and press arrows ‘ ↓ ↑ ↓ ↑’. Speed limit is displayed for 5 seconds. You can change the max speed you want to ride by pressing "arrow up" or "arrow down". You will find detailed instruction with your tuning kit.
After the dongle is installed, your eBike display will show real data, such as maximum and average speeds, daily mileage and cruising range.
If your eBike manufacturer speed limit is set up to 16mph (25 km/h) or 28 mph (45 km/h) it will increase the speed limit up to 62 mph (99 km/h). But if it is set up to 20mph (32 km/h) this tuning kit will not work with your eBike. Tuning kit does not add extra power to your eBike, it removes speed limits.
Speed limits will be removed and you will be able to ride up to 61mph ( 99 km/h). If you raise the level of engine support only slightly, e.g. from 16mph to 21mph (25 km/h to 35 km/h), you can still drive very sporty, but at the same time benefit from moderate battery consumption.
Adjustable dynamic mode with reduced "wall effect" – that means the motor support does not stop so abruptly anymore when the maximum speed is reached. The result is a more pleasant driving experience, as you can drive with much more constant pedal force.
Please be aware that the Tuning kit does not add extra power to your eBike motor. It only removes speed limits and enables you to ride as fast as you can pedal.
The box is splash-proof.
All the tuning kits are carefully tested before sending it out to You.
Will VOLspeed V2 for Yamaha work with my eBike?
This VOLspeed tuning module is compatible with Yamaha PW-X / PW-X2 / PW-SE / PW-ST / PW-TE drive systems from all years of manufacture (also 2020).
- The module is also compatible with the brand new Yamaha 2020 drive systems (PW-X / PW-X2 / PW-SE / PW-ST / PW-TE).
- The new V2 module also supports S-Pedelecs and E Bikes reduced to 20 km/h.
- Compatible with the following displays: Display A (Side Switch), C (Multi Switch) and display X.
Not compatible with Yamaha Branded Bikes - Urban Rush, Cross Core, Cross Connect, YDX-Torc and Wabash.
We have prepared a detailed video to make installation easy for you. The device is installed invisibly on the drive motor from the outside. The installation is done with a little technical skill in 15-30 minutes. No cables have to be damaged or modified, the module is simply plugged in. The module is absolutely watertight because all of the electronics are encapsulated.
Yamaha PW-SE / PW-ST / PW-TE: 3 & 6 mm Allen wrench, ideally a torque ratchet.
Yamaha PW-X: 3, 5 & 6 mm Allen wrench, ideally a torque ratchet, chaining wrench.
If you have any troubles with installation or disassembly, do not hesitate to contact us.
If You are planning to install VOLspeed on brand-new eBike, make sure you ride it for at least 0.6miles (1km) before the Tuning Kit is activated.
In the event you purchase the incorrect item, we offer 30 days returns policy. Please ensure that the item is returned unopened and use a tracked delivery service.
VOLspeed Products are thoroughly tested and we stand by their quality.
If You have any questions, please do not hesitate to contact us.
Thank you for looking!
Two Wheels Empire Team
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of VOLspeed products. Electric bikes equipped with VOLspeed products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with VOLspeed products can be used exclusively on private property and entirely at one’s own risk. The use of VOLspeed may void the warranty of your eBike.
We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.
- Dimensions: 1.46" x 0.75" x 0.35" (3,7cm x 1,9cm x 0,9cm)
- Cable length: 5.5" (14cm)
- Weight: 0.88oz (0,025kg)
- Supply voltage: 12VDC
- Power consumption: 0,2W
Scope of delivery
- VOLspeed V2 tuning module for Yamaha E Bikes
- Installation and operating manual
- 2 cable ties