E-BIKE TUNING KIT Levociraptor for BROSE Specialized Creo, Vado and Levo SL 2020-2021 ebike chip Levociraptor
Levociraptor

E-BIKE TUNING KIT Levociraptor for BROSE Specialized Creo, Vado and Levo SL 2020-2021

£129.99 Save £-129.99
19 in stock


"Absolutely brilliant! took the bike out today and it’s like a motocross bike 💯" - George

Product Features

Compatible with:
- Brose Specialized LEVO SL, VADO SL and CREO SL 2020-2021 eBikes with the MAHLE motor. 
Removes speed limits up to 54 mph (86km/h).
- From now on you will be able to ride even at a speed over 25mph (40km/h), 30mph (50km/h) and even more than 37mph (60 km/h)  - as much as you can pedal! 

Tuning kit is always active after installation.
- The Levociraptor connects to your Specialized Levo, Vado or Creo SL via the TCU and speed calibration within BLEvo app allows you to retain accuracy of speed and distance. 

Easy Installation.
-The Levociraptor connects to your speed sensor cable. It is really simple to install it - just plug and play.

Will Levociraptor Brose Specialized for CREO, VADO and LEVO SL work with my eBike?

Compatible with all Brose Specialized CREO, VADO and LEVO SL 2020-2021 eBikes with the MAHLE motor. This tuning kit works with higher speed versions as well!
If you have Brose Specialized Levo or Kenevo  eBike 2019-2021, you will need this tuning kit.

Assembly

We have prepared detailed instructions, which you will receive together with the Tuning kit to make installation easy for you. You just need to remove the cover from the motor and attach the connectors. You will need a basic toolkit, some bikes may require a crank puller. 
If you have any troubles with installation or disassembly, do not hesitate to contact us.
If You are planning to install Levociraptor on brand-new eBike, make sure you ride it for at least 0.6miles (1km) before the Tuning Kit is activated. 

Product details

  • Size without cables - 1.18 x 0.78 x 0.19 in (3 x 2 x 0.5 cm)
  • Operating voltage - 5-15 V
  • Max. power consumption - 100 mA / 1.5 W
  • Weight - Approx. 14 g
  • The voltage within the tuning tool does not exceed 50 V
  • Warranty - 1 year

Legal

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Levociraptor products. Electric bikes equipped with Levociraptor products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Levociraptor products can be used exclusively on private property and entirely at one’s own risk. The use of Levociraptor may void the warranty of your eBike.
We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds. 

    You are responsible for any changes you make or attempt to make to your e-bike. Removal of the speed limiter in public places such as streets, squares and cycle paths is FORBIDDEN BY THE LAW. Therefore it is possible to remove the speed limit in places such as circuits, tracks and private properties. Mounting the device may void the factory warranty with the manufacturer. Trailwatts declines all responsibility for any damage caused to pedal assisted bicycles on which the SL speed module system is fitted. Trailwatts declines all responsibility for damage to persons or objects caused in any way linked to the use of SL Speed Module.

    1. Make sure bike is off and turning bike upside down is easiest for installation on Levo SL.

    2. Remove Bashguard cover bolt – T25 torx.

    3. Remove front motor/ guard bolt – T30 torx.
    4. Remove Upper motor bolt – T30.
    5. Loosen rear motor bolt (do not remove) – T30 torx.
    6. Drive side, Remove centre bolt(T20 torx) and thenremove front motor bolt – T30 torx.
    7. Bashguard/ motor cover can now be removed.
    8.Undo the centre bolt (T25 torx) and remove chainguide, remove upper motor bolt – 5mm Allen Key.
    9. Loosen rear motor bolt (4mm allen key) and pivot motor from front area to gain access to the speed sensor cable. Removal of rear wheel may be necessary to slacken 4mm bolt.
    10. Disconnect speed sensor cable from motor and connect to SL module and connect SL module to the motor noting the male to female fitment and check alignment before pushing connectors together.
    11. Place SL module within seat tube area and connector underneath the main battery leads (large gloss cables). The motor should refit smoothly, if any resistance please check cable position and refit.
    12.Re-install upper and front motor bolts loosely to assist with reversal of above steps to complete install.
    13. Once assembled, switch bike on and test ride. Always wear safety equipment especially a helmet.
    Specialized Vado Installation
    You are responsible for any changes you make or attempt to make to your e-bike. Removal of the speed limiter in public places such as streets, squares and cycle paths is FORBIDDEN BY THE LAW. Therefore it is possible to remove the speed limit in places such as circuits, tracks and private properties. Mounting the device may void the factory warranty with the manufacturer. Trailwatts declines all responsibility for any damage caused to pedal assisted bicycles on which the SL speed module system is fitted. Trailwatts declines all responsibility for damage to persons or objects caused in any way linked to the use of SL Speed Module.
    1. Make sure bike is turned off and turning bike upside down is easiest for installation on Vado SL.
    2. Undo Lower motor cover bolt – T25 torx and remove cover.
    3. Remove the front two motor bolts non drive side and loosen the rear bolt closest to chainstay – T30 Torx. 
    4. Remove chain from front chainring and undo all 4 bolts securing chainring to crank arm – M5 allen key.
    5. Remove the two front motor bolts and loosen the rear motor bolt closest to chainstay/ swingarm – T30 torx.
    6.Tilt the motor upwards and unplug the speed sensor cable which is closest to crank arm and connect SL module to the cable and connect female connector from SL module to motor noting the groove and pin alignment. Be careful when seating the connectors.
    7. Once SL module connected to motor, tuck the SL module above motor and lower motor to align bolt holes. Beware of cable routing and make sure no cables are pinched when lowering motor into place.
    8. Replace motor bolts loosely before tightening to factory specification. Make sure you tighten all 6 motor bolts.
    9. Re-attach Chainring and tighten chainring bolts making sure chainring is secured correctly. Re-instate chain.
    10. Fit motor cover.
    11. Switch bike on and test ride to confirm derestricted and no TCU errors.

    Two Wheels Empire stocks best selling items across Europe (Germany and Lithuania), United Kingdom, United States and Australia, so wherever you ride your eBike in the world we aim to ship the products from the nearest warehouse to you, so you can get it fastest, cheapest and without import taxes! 

    DISPATCH TIME - All purchases will be dispatched next business day, if you will buy till 12 o'clock (UK time) it will be dispatched on the same day. Our service is available Monday – Friday. 

     

     UK 

    FREE EXPRESS DELIVERY 

    Parcel Force 24-48h delivery. 

    Free tracked UK delivery on all orders over 99£!

    Shipping cost - 9.99£ while purchasing less than 99£. 

    Exact price and delivery time will be calculated at the Check Out.

    * Most of the orders are shipped from the UK warehouse (some could be from the European warehouse). 

     

     EUROPE 

    EXPRESS or FREE STANDARD TRACK & SIGNED shipping

    DHL Express Next day delivery. Exact price and delivery time will be calculated at the Check Out. 

    Free Standard Tracked & Signed Delivery by DHL Global Mail in 2-5 business days.

    Free tracked Europe delivery on all orders over 99£!

    Shipping cost - 9.99£ while purchasing less than 99£. 

    * All orders are shipped from the European Warehouse. 

     

      US & CANADA 

    EXPRESS or FREE STANDARD TRACK & SIGNED INTERNATIONAL shipping

    DHL Express 3-4 business days delivery. Exact price and delivery time will be calculated at the Check Out. 

    Free Standard Tracked & Signed Delivery by DHL Global Mail in 7-15 business days. 

    Free tracked delivery on all orders over 99£! 

    Shipping cost - 14.99£ while purchasing less than 99£. 

    * Most of stock is kept in US warehouse, so if it is possible - we ship directly from the United States, delivery time 1-7 business days.

     

      AUSTRALIA & NEW ZEALAND 

    EXPRESS or FREE STANDARD TRACK & SIGNED INTERNATIONAL shipping 

    DHL Express 5-6 business days delivery. Exact price and delivery time will be calculated at the Check Out. 

    Free Standard Tracked & Signed Delivery by DHL Global Mail in 7-15 business days. 

    Free tracked delivery on all orders over 99£!

    Shipping cost - 18.99£ while purchasing less than 99£.

    * Most of the stock is kept in Australian warehouses, so if possible - we ship directly from Australia, delivery time 5-7 business days.

     

     REST OF THE WORLD 

    EXPRESS or STANDARD TRACK & SIGNED shipping

    DHL Express 2-6 business days delivery. Exact price and delivery time will be calculated at the Check Out. 

    Free Standard Tracked & Signed Delivery by DHL Global Mail in 7-15 business days. 

    Shipping cost - 18.99£ while purchasing less than 99£.

    * wherever you ride your eBike in the world we aim to ship the products from the nearest warehouse to you, so you can get it fastest, cheapest and without import taxes!

     

    ORDER RETURNS - You can return items that you are not happy with within 14 days after delivery. Please contact us at Hello@TwoWheelsEmpire.com for the return instruction.

    CUSTOM TAXES AND DUTIES - Two Wheels Empire operates on a Delivered Duty Unpaid basis*.  However, Two Wheels Empire stock products in the United Kingdom, Germany, United States and Australia in order to ship from the nearest warehouses to you as a client in order to save on import taxes. For more information about where the products are shipped from please contact Hello@TwoWheelsEmpire.com .

    * This means that any outstanding import duties, clearance fee’s, brokerage fees or other additional charges have to be paid by the customer upon delivery of your order. Contact your local customs authority for more information. The customer must take full liability for any parcels returned to Two Wheels Empire due to unpaid customs charges or ignored/unseen emails from your customs office or chosen carrier. Any postal charges, returned shipment costs, customs charges and handling fees will be deducted from any due refund or exchange request.