eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3 With Stock (eTracker) Hub
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3 With DT Swiss Hub
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3 With Hope Pro4 Hub
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3 With Stock (Mystery) Hub
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3
eBike Tuning Kit Planet3 for Giant Reign E+2Pro 2020 ebike chip Planet3
Planet3

eBike Tuning Kit Planet3 for Giant Reign E+ 2 Pro 2020

Regular price £149.00 Save £-149.00
18 in stock

 

Description

Planet3 is an easily installed and reversible way to derestrict your eBike. It uses a purely mechanical design utilizing a patent pending planetary gear set which makes it undetectable to the eBike's electronic gizmos and gives you full control over the choice of speed at which you want to ride your eBike. 

No more pushing through pudding after hitting the speed limit, virtually no maintenance and no worries. Just you and your eBike - the way it was meant to be!

PLANET3 is a planetary gear set which reduces the rotation speed of the magnet used by the wheel speed sensor three times. For every three full rotations of the rear wheel, the magnet completes just one full rotation - effectively making the bike think it's doing 1/3 the speed it is actually doing, thus increasing the pedal assist speed limit by a factor of 3. For the Specialized models sold on UK/EU market this translates into a speed limit increase from 15.5 to 47 mph (25 to 75 kmh), while the US and Canada models limit is raised from 20 to 60 mph.

Hub compatibility: 

Stock (eTracker) - Hub with wrench flats that requires a replacement end cap.

Stock (Mystery) - Hub with a smooth but conical lower profile. Already compatible with PLANET3.

DT Swiss - Any hub with a simple 19 mm diameter end cap profile (Roval, DT Swiss, Syntace, Stan's NEO).

Hope Pro4 - Comes with a CNC machined replacement end cap for the Hope Pro4 boost hub.

All hubs that come stock on Giant 2020 models (e-TR1, e-TRX, eTracker, Shimano FH-MT400-B). 

Brake disc compatibility: 

Stock - Whatever brake rotor comes stock on the bike.

Shimano XT - Shimano SM-RT76 or SM-RT86 two-piece rotor.

Magura - Magura MDR-C or MDR-P rotors are within the allowed thickness at the 6-bolt interface.

Hope Floating - Hope Floating two-piece rotor is compatible with the PLANET3 on Giant eBikes.

Most IS 6-bolt rotors on the market including Shimano XT & XT Ice Tech, SRAM Centerline and all other flat steel rotors. PLANET3 is not compatible with thick center carrier rotors such as Hope Saw and Floating rotors.

Physical damage by outside factors such as rock strikes, caught branches and sticks is not covered by warranty. Buyer accepts the risk that crashing or having a branch caught between a rotor and a frame can damage a plastic device and this will not be covered by warranty.

It is possible to purchase an extra Planet3 part if the buyer is willing to do so. Please, contact us about it.


Contents

1 x PLANET3 device consisting of sun gear, ring gear and 2 x planet gear (with magnets).
3 x M5x10 ISO 14580 bolt with pre-applied Loctite 268.
1 x replacement end cap for eTracker Boost hub (if applicable)

All Planet3 come complete with an instruction manual, you can also find a video tutorials below. 

If you have any questions regarding the setup please do not hesitate in contacting us, we are happy to help. 

Follow the installation Steps Below
 

Features

Material: Hybrid PLA
Gear ratio: 1,513:1 dual planet config; 3,03:1 single planet config
Planet: Ø12 x 1,5mm Neodymium N38
Weight: 25 g
Dimensions: Ø70,6 x 6,8mm

If you have Giant Reign E+ 0 Pro or E+ 1 Pro 2020, you would need this tuning kit: https://www.twowheelsempire.com/products/ebike-tuning-kit-planet3-for-giant-reign-e-0pro-and-e-1pro-2020

Legal

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use Planet3 products. Electric bikes equipped with Planet3 products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Planet3 products can be used exclusively on private property and entirely at one’s own risk. The use of Planet3 may void the warranty of your eBike.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds. 

If You have any questions, please do not hesitate to contact us.
Thank you for looking!
Two Wheels Empire Team

The procedure of installation is identical for the Rocky Mountain and Giant eBikes in almost all aspects.

Step one:

For the Giant you would receive a dual planet configuration. Be careful to remove the external position checking magnets after verifying that the internal ones are at 180° exactly.

Step two:

One difference to note is the eTracker boost hub. It requires a replacement end cap which relocates the wrench flats out of the way of the PLANET3 ring gear. You will receive this with your PLANET3 if you have selected an eTracker hub in the product configuration. As far as the replacement goes, you’ll need two 17 mm cone wrenches to remove the original and replace with the one you would receive (if the braking side is the one to come loose first). If the drive side becomes loose instead, then it’s a bit of a issue: cassette tool and chain whip are needed, remove the cassette, remove the drive side end cap, get a 12 mm allen key (rather huge), stick it in the axle, then remove the braking side end cap, use Loctite to re-fit and tighten the drive side while holding the other side with the aforementioned 12 mm allen, then finally fit the braking side replacement end cap that you would receive – also Loctite on the threads. Torque to use is like this: tighten until snug, then another 30°.

Step three:

We would recommend to pay attention to the installation depth of the ring gear too.

During your installation we would highly recommend for you to perform the empty device test as outlined at the end of the previous video. If there is no scraping sounds of plastic on plastic – you’re good to go, your frame is not at risk, you have correctly gauged the installation depth of the ring gear and PLANET3 should never wear out.

Be aware to be careful in the last step too when you put the wheel back into the bike. You could hit the PLANET3 ring gear against the frame or sensor when you’re aiming the disc into the calipers. So we recommend to do everything really gently during all installation process.

Two Wheels Empire stocks best selling items across Europe (Germany and Lithuania), United Kingdom, United States and Australia, so wherever you ride your eBike in the world we aim to ship the products from the nearest warehouse to you, so you can get it fastest, cheapest and without import taxes! 

DISPATCH TIME - All purchases will be dispatched next business day, if you will buy till 12 o'clock (UK time) it will be dispatched on the same day. Our service is available Monday – Friday. 

 

 UK 

FREE EXPRESS DELIVERY 

Royal Mail 48h delivery

Free tracked UK delivery on all orders over 99£!

Shipping cost - 9.99£ while purchasing less than 99£. 

Exact price and delivery time will be calculated at the Check Out.

* Most of the orders are shipped from the UK warehouse (some could be from the European warehouse). 

 

 EUROPE 

EXPRESS or FREE STANDARD TRACK & SIGNED shipping

DHL Express Next day delivery. Exact price and delivery time will be calculated at the Check Out. 

Free Standard Tracked & Signed Delivery by DHL Global Mail in 2-5 business days.

Free tracked Europe delivery on all orders over 99£!

Shipping cost - 9.99£ while purchasing less than 99£. 

* All orders are shipped from the European Warehouse. 

 

  US & CANADA 

EXPRESS or FREE STANDARD TRACK & SIGNED INTERNATIONAL shipping

DHL Express 3-4 business days delivery. Exact price and delivery time will be calculated at the Check Out. 

Free Standard Tracked & Signed Delivery by DHL Global Mail in 7-15 business days. 

Free tracked delivery on all orders over 99£! 

Shipping cost - 14.99£ while purchasing less than 99£. 

* Most of stock is kept in US warehouse, so if it is possible - we ship directly from the United States, delivery time 1-7 business days.

 

  AUSTRALIA & NEW ZEALAND 

EXPRESS or FREE STANDARD TRACK & SIGNED INTERNATIONAL shipping 

DHL Express 5-6 business days delivery. Exact price and delivery time will be calculated at the Check Out. 

Free Standard Tracked & Signed Delivery by DHL Global Mail in 7-15 business days. 

Free tracked delivery on all orders over 99£!

Shipping cost - 18.99£ while purchasing less than 99£.

* Most of the stock is kept in Australian warehouses, so if possible - we ship directly from Australia, delivery time 5-7 business days.

 

 REST OF THE WORLD 

EXPRESS or STANDARD TRACK & SIGNED shipping

DHL Express 2-6 business days delivery. Exact price and delivery time will be calculated at the Check Out. 

Free Standard Tracked & Signed Delivery by DHL Global Mail in 7-15 business days

Shipping cost - 18.99£ while purchasing less than 99£.

* wherever you ride your eBike in the world we aim to ship the products from the nearest warehouse to you, so you can get it fastest, cheapest and without import taxes!

 

ORDER RETURNS - You can return items that you are not happy with within 14 days after delivery. Please contact us at Hi@TwoWheelsEmpire.com for the return instruction.

CUSTOM TAXES AND DUTIES - Two Wheels Empire operates on a Delivered Duty Unpaid basis*.  However, Two Wheels Empire stock products in the United Kingdom, Germany, United States and Australia in order to ship from the nearest warehouses to you as a client in order to save on import taxes. For more information about where the products are shipped from please contact Hi@TwoWheelsEmpire.com .

* This means that any outstanding import duties, clearance fee’s, brokerage fees or other additional charges have to be paid by the customer upon delivery of your order. Contact your local customs authority for more information. The customer must take full liability for any parcels returned to Two Wheels Empire due to unpaid customs charges or ignored/unseen emails from your customs office or chosen carrier. Any postal charges, returned shipment costs, customs charges and handling fees will be deducted from any due refund or exchange request.