MBIQ-P Tunning kit for PX-X3 / Syncdrive P2

Very easy installation - the tuning is simply plugged between the existing sensor cable and the engine and can be removed again if necessary.

After installation, the module will analyze the current speed profile, process it and - with active tuning - pass on manipulated values. Due to this functional principle, the e-bike display will "freeze" the displayed speed from a speed of approx. 12-13mph (20-22 km/h), so that the same value is always displayed (the total milles/kilometers displayed will then be correspondingly lower). A speed halving, as known from some other tuning tools, does not take place.

The functionality can be reprogrammed after installation without additional devices. By your own choise you can choose:

MODE 1: Tuning permanently activated (permanent motor support).

MODE 2: Tuning permanently deactivated (motor support up to 16mph (25 km/h)).

MODE 3: Tuning according to switch-on condition (via magnet, can be deactivated while driving!)

This MBIQ-P tuning kit is made to fit Yamaha PW-X3 & Giant Syncdrive Pro 2 motors. The module is compatible with all motor firmwares from the respective manufacturers.

The module simply has to be plugged in between the speed sensor and the motor controller. For an optimal connection, the tuning module has the same connectors as the existing sensor cable. If necessary, the MBIQ-P can be removed again at any time.

There are clear instructions how to install tuning kit and no special tools tools are needed. If you have any problems along the way, please feel free to contact us, we're here to help.

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use MBIQ-P products. Electric bikes equipped with MBIQ-P products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with MBIQ-P products can be used exclusively on private property and entirely at one’s own risk. The use of MBIQ-P may void the warranty of your ebike. We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

In case of updating the software of your e-bike, uninstall the tuning kit from the e-bike first, update the software and reinstall tuning kit back. Product's warranty does not cover eBike software updates. We recommend to contact us before updating the software.