Mudhugger EVO Bolt On - Standart length front mudguard for FOX/Marzocchi
We’ve had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38’s and Rockshox ZEB (not compatible with 38mm offset ZEB) to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see link above) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2.
Minimum FORK OFFSET - 44MM
Also comaptable with Ohlins RXF and DH forks. Adapter bracket required, see link above.
Compatible with RS RECON GOLD & SILVER 35. Use the angle adjuster shim from the default fitting kit along with the 6mm bolt (sold serperatley). See link above.
PLEASE NOTE - For Downhill forks (not compatible with older 650b FOX 40's). You will still need to order the seperate adapter for Ohlins DH forks.
Length - 515mm total - Rear extension 330mm, front extension 185mm
Weight - 125g, without fittings.
Bolts directly to the back of the fork brace. Default FOX kit Supplied with rubber pads, bolts, washers and hex key to install to your FOX forks. For ZEB, new Domain, Recon, DVO and Ohlins an ADAPTER PACK is required, sold seperatley (see above).
See below for our 'How to fit video'
- More mud clearance.
- No more crown fouling at full compression.
- Optimum length, not too short, no longer than needed.
- Subtle kicker to keep length as short as possible without compromising spray protection.
- 100% recycled PP.
- Designed, made and packed in the UK.