SpeedFun Ribelle for Specialized Turbo Levo SL, Kenevo SL, Creo SL, Como SL and Vado SL (SL 1.1, SL 1.2 motors)

The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:

Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]

After installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated / deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike.

IMPORTANT Activation and deactivation:
Type the sequence on the handlebar control: - + - +
A feedback will be briefly displayed on the battery charge level. The charge increases to indicate the high speed setting. Charge drops to indicate speed setting 25 kmH.
The setting mode remains memorized even if the ebike is switched off.

It is possible to carry out this operation even when the bike is not equipped with a remote control on the handlebar. In this case, type the sequence on the top key of the TCU LED: Long press, quick press, long press, quick press.

Feedback will be briefly displayed on the battery charge level. The charge rises to indicate the high speed setting. The charge drops to indicate the speed setting at 25 kmH.

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.

The use of SpeedFun may void the warranty of your ebike. We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

Warranty does not cover damage resulting from eBike software updates. Remove the tuning kit before updating the software. Check with us first to ensure the kit is compatible with your updated eBike. We cannot guarantee that the kit will function the same after updates. Please exercise caution.