PearTune MSO 4.0 Tuning kit for Avinox DJI M1

The PearTune MSO Avinox DJI M1 tuning chip is an add-on device developed by PearControl for ebikes with the Avinox drive system. with M1 version motors. It is used to remove the speed limitation of the electric bike pedaling at 25 km/h. The product is designed with minimal dimensions for easy installation in all electric bike models from all manufacturers on the market and for flawless cooperation with speed sensors in the original Avinox DJI system.

The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:

Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]

Activation/Deactivation can be done in this way:
• by pressing the – + – + button combination (i.e. 4 presses) , start from the TURBO assistance mode by pressing the MINUS button . Chip activation is indicated by the display of 19 km/h instead of the current speed for 2-3 seconds. Chip deactivation is indicated by the display of 12 km/h instead of the current speed for 2-3 seconds. Calibration is performed completely automatically when the chip is first turned on or off

Displaying values

When riding with the chip on, the e-bike display correctly displays the actual speed up to 22.9 km/h. After exceeding this value, the actual speed is displayed on the last two digits of the display, for example: 23.3 corresponds to a speed of 33 km/h, 24.2 corresponds to a speed of 42 km/h, etc.

The device is fully compatible with the Avinox DJI M1 motor and all displays available on the market for these motors. Fully compatible with the latest SW update.

When connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install Peartune on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.

Installation Guide:

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

Peartune products are thoroughly tested and we stand by their quality - Peartune provides Lifetime warranty to all their products.

Garantija neapima žalos, atsiradusios dėl eBike programinės įrangos atnaujinimų. Prieš atnaujindami programinę įrangą, pašalinkite derinimo rinkinį. Pirmiausia pasitikrinkite su mumis, kad įsitikintumėte, jog rinkinys yra suderinamas su jūsų atnaujintu eBike. Negalime garantuoti, kad rinkinys veiks taip pat po atnaujinimų. Prašome būti atsargiems.