Boost All

Filter
Talaria Komodo fork protectors shown as a left and right pair with the small mounting clip beside them
Inner faces of the Talaria Komodo fork guards, showing the upper mounting bosses and the separate clip
Talaria Komodo Replacement Right Side Fork Protector
17.21 EUR
Black aluminium left foot peg for the Talaria Komodo, seen from above with steel traction screws ringing the open platform
Underside of the left Komodo foot peg, showing the hollow cast body and the notched seats for the grip screws
Talaria Komodo Left Aluminium Foot Peg – Black
33.43 EUR
Talaria Komodo rear fender reinforcing holder, a textured black bracket with a triangular cut-out and three bolt holes
The fender holder from the opposite side, its pressed centre rib running down the arm to the single-hole tab
Talaria Komodo Rear Fender Reinforcing Holder
14.74 EUR
Talaria Sting R off-road tail light angled on white, red faceted lens under a clear cover with its wiring loom coiled above
Talaria Sting R tail light seen from behind at an angle, its two threaded mounting studs and slotted back plate facing up
Talaria Sting R Tail Light Offroad
39.34 EUR
Black faceted battery pack holder cover for Talaria Sting MX3 and MX4, outer face angled up with two threaded bolt holes
Underside of the Talaria Sting MX3/MX4 battery cover, showing the hollow moulding, internal ribs and two-hole bolt plate
Talaria Sting MX3 / MX4 Battery Pack Holder Cover
18.67 EUR
Black anodised upper handlebar clamp for the Talaria Komodo, outer face up with a bolt hole at each end
Underside of the Komodo upper handlebar clamp, showing the smooth half-round channel that grips the bar
Talaria Komodo Handlebar Upper Clamp
16.23 EUR
Black CNC right footpeg for the Talaria Sting, grip pins across the platform and threaded stud at the pivot
Right footrest tipped to show the mount block face, its bolt holes and the threaded stud
Talaria Sting MX3 / MX4 / MX5 / XXX Right Footrest Assembly CNC – Black
46.22 EUR
Black curved side kickstand leg for Talaria Sting MX3 and MX4, clevis pivot at the top and a flattened foot pad
Talaria Sting MX3 / MX4 Side Kickstand
29.50 EUR
-1%
Zinc-plated coil side stand spring with an open hook at each end, for Talaria Sting MX4, Sting R and X3
Talaria Sting MX4 / Sting R / X3 Side Stand Springs
6.39 EUR 6.33 EUR
Pair of glossy black Fastace fork guards for the Talaria Sting MX3, MX4 and LB, angled to show their lower mounting feet
Close-up of the fork guard's lower foot, two steel-lined bolt eyelets beside the moulded Fastace logo
Talaria Sting MX3 / MX4 / LB Fastace Fork Guard – Right
19.66 EUR
-1%
Short zinc-plated Talaria kickstand pivot pin, threaded at one end with a hex collar and a stepped, grooved shank
Talaria Kickstand Spring Holding Pin B Short version
8.35 EUR 8.23 EUR
Black steel headlight holder for the Talaria Sting, arched cut-out and four slotted mounting arms
Talaria headlight bracket from the other side, folded upright leg with two slotted bolt holes
Talaria Sting MX3 / MX4 / MX5 Headlight Holder
12.28 EUR
Fastace fork guard Talaria MX3/MX4/LB - Left
Fastace fork guard Talaria MX3/MX4/LB - Left
Talaria Sting MX3 / MX4 / LB Fastace Fork Guard – Left
19.66 EUR
Long matte black under-seat fender for the Talaria XXX, angled to show its raised fixing bosses and lipped end
Other side of the Talaria XXX under-seat cover, with notched cut-outs at the wide end and a moulded stamp patch
Talaria XXX Under-Seat Plastic Fender
27.52 EUR
80/100-21 front inner tube for the Talaria Komodo, folded flat with its metal valve stem facing outward
Close-up of the front tube's rubber folds, showing the moulded seam ribbing and a faint blue guide stripe
Talaria Komodo Original Front Tire Tube 80/100-21
30.49 EUR
PearTune MSO module for Shimano EP8 in black heat-shrink, with two short plug-and-play leads off the loom
PearTune 3.0 for Shimano EP8 without Di2 Still On Version
215.38 EUR
Exploded diagram of the Stark Varg MX rear wheel with the flanged shaft lock nut shaded dark at the outer end of the axle
Stark Varg MX Rear wheel shaft lock nut
19.58 EUR
Sold Out
Stark Varg MX rear wheel shown fitted, machined sprocket and gold chain over the hub with the tensioner block below
Stark Varg MX Rear wheel shaft
195.71 EUR
Rear wheel diagram for the Stark Varg MX with the rim lock shaded dark, its ribbed body moulded 2.15 above the stud and nut
Stark Varg MX Rim lock 2,15
19.58 EUR
Rear wheel diagram for the Stark Varg MX with the rubber rim plug shaded dark, a small cap beside the valve hole in the rim
Stark Varg MX Rim rubber plug
2.86 EUR
Sold Out
Exploded line drawing of the Stark Varg front hub, seal rings shaded black outboard of each bearing
Stark Varg Front Hub Bearing Seal Ring
7.47 EUR
Sold Out
Exploded line drawing of the Stark Varg front hub with the two wheel bearings shaded black
Stark Varg Front Hub Bearing
19.58 EUR
Grey Image Available Soon placeholder in place of a photo of the 18-inch Stark Varg MX Power Tube
Stark Varg MX Power Tube 18"
39.25 EUR
Ring of spoke nuts picked out in black around the rim of an exploded Stark Varg MX front wheel drawing
Stark Varg MX Spoke nut
2.94 EUR
Sold Out
Exploded line drawing of the Stark Varg MX front hub with the short foam centering bushing shaded dark on the axle
Stark Varg MX Front Hub Interior centering Bushing Foam
19.58 EUR
Sold Out
Exploded line drawing of the Stark Varg triple clamps with both steering head bearings shaded black on the stem
Stark Varg Steering head bearing (1 unit)
13.67 EUR
Sold Out
KYB rear shock for the Stark Varg EX, shown from the reservoir end with red and blue clicker adjusters and coil spring
Stark Varg EX KYB Rear shock 90-100 kg / 187-198 lbs
589.10 EUR
Sold Out
KYB rear shock for the Stark Varg EX, shown from the reservoir end with red and blue clicker adjusters and coil spring
Stark Varg EX KYB Rear shock 75/90 kg / 165-176 lbs
589.10 EUR