Love For The Two Wheels

A smart Tuning Kit of the third generation with an option to set a speed limit of an e-bike of your own choice. After the chip is installed, your e-bike’s display will show real data, such as maximum and average speeds, daily mileage and cruising range.

Activation - by pressing 'WALK' or '+ - + - ' buttons.

Compatible with motors: Active Line, Active Line Plus, Performance Line and Performance Line CX, including motors of the 4th generation.

How does SpeedBox 3.0 work?

The tuning kit can be activated directly on your bike’s display. After pressing the 'WALK' or ' + - + - ' buttons, a value of 6.2 mph (9.9 kph) is displayed and from now on you will be able to ride at a speed of 25 mph (40 kph), 31 mph (50 kph) and even more than 37 mph (60 kph).

To deactivate the tuning kit, press the 'WALK' button again. The value of 1.6 mph (2.5 kph) will appear on your display and the speed limit will reset to 16 mph (25 kph). Your e-bike will then work the same as before installation of the chip.

You can set the maximum speed of an electric assistance by changing modes: Turbo - Sport - Tour - Eco - Tour - Sport - Turbo. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing WALK button shortly or by turning the rear wheel 360°. The value of 0.9 mph (1.5 kph) on the display corresponds with the limit of 9.3 mph (15 kph), 1.2 mph (2 kph) corresponds with the limit of 12.4 mph (20 kph), 2,5 corresponds with 15 mph (25 kph), 3,0 corresponds with 18.6 mph (30 kph), 9,9 corresponds with 61.5 mph (99 kph) etc. The last displayed limit will be saved after 5 seconds of inactivity.

When using SpeedBox 3.0 with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 mph/kph is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip.

Why not cheaper Speedbox 2.0?

Speedbox 3.0 for Bosch works with the latest Gen 4 Bosch motors, and on top of that they are undetectable by the workshop to keep the warranty safe. The same thing applies for older Gen 3 motors, but only with the latest update from Bosch. So if your bike is purchased on 2019 and later we would recommend choosing Speedbox 3.0. If the bike is early 2019 and older with no updates - Speedbox 2.0 will work fine.

Assembly

When connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.

Video explaining how to Install
Click Here

Video explaining Count Down function

Click Here

Which Speedbox Tuning Kit do I need?

This tuning kit is compatible with all eBikes; eMTB; eMountainBikes that have a Bosch Motor manufactured from 2014-2020. Including all Active Line, Active Line Plus, Performance Line and Performance Line CX models including motors of the 4th generation.

Legal

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

SpeedBox Products are thoroughly tested and we stand by their quality.

SpeedBox provide Life Long warranty to all their Products!

If You have any question, please do not hesitate to contact us.

Thank you for looking!

Two Wheels Empire Team

SpeedBox 3.0 for Bosch 2014 - 2021 Motor (including Gen4) ebike chip SB Bosch 3.0

SpeedBox 3.0 for Bosch 2014 - 2021 Motor (including Gen4) ebike chip SB

SpeedBox 3.0 for Bosch 2014 - 2021 Motor (including Gen4) ebike chip SB Bosch 3.0 with Crankpuller

SpeedBox 1.0 for Shimano E8000, E7000, E6100, E5000

Regular price £159.00 Save £-159.00

SpeedBox 1.0 Tuning Kit Compatible with all Shimano Steps motors E6100, E8000, E7000, E5000 from 2014 onwards, till the current one.

“Easy to fit and the bike flies now. Many thanks” - Mark

Product Features

SpeedBox 1.0 for Shimano Steps is a revolutionary tuning kit which suppresses the speed limiter of your electric bike.

After installing your SpeedBox, the display will show real values up to 13.67mph (22 kph)

Then the speed indicator gets stabilized and keeps on showing the same value even at higher speeds.

The motor's electric assistance switches off when reaching 30mph (50kph).

Activation by pressing the LIGHT Button. When the lights are OFF, the tuning kit is Activated. When the lights are ON, the tuning kit is deactivated. If you would like to use your tuning kit and lights together, you need to unplug the ride wire and secure it. Your tuning kit will be activated with the activation of your eBike.

All SpeedBox's come complete with an instruction manual, you can also find a video tutorial below.
If you have any questions regarding the setup please do not hesitate in contacting us, we are happy to help.

Which Speedbox Tuning Kit do I need?

This tuning kit is compatible with all eBikes; eMTB; eMountainBikes that have Shimano Motor E6100, E8000, E7000, E5000

Only for e-bikes without Di2 (electronic gear shifting system)!

If you need a tuning kit for Shimano E6000 we do have it too, please find it here or contact us directly.

Assembly

When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the chip is activated.

Find the installation here

Legal

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

SpeedBox Products are thoroughly tested and we stand by their quality. SpeedBox provide Life Long warranty to all their Products!

If You have any question, please do not hesitate to contact us.
Thank you for looking!
Two Wheels Empire Team

SpeedBox 1.0 for Shimano E8000, E7000, E6100, E5000 ebike chip SB

SpeedBox 2.0 for Giant 2017 - 2020

Regular price £159.00 Save £-159.00

SpeedBox 2.0 Tuning Kit Compatible with all Giant 2017 - 2020 Syncs Drive powered by Yamaha Motor

“Easy to fit and the bike flies now. Many thanks” - Mark

Product Features

SpeedBox 2.0 for Giant is a revolutionary tuning kit which suppresses the speed limiter of your electric bike.

After installing your SpeedBox, the display will show actual values such as maximum speed, average speed, distance travelled daily and range.

Activation - by pressing WALK

Once activated, the SpeedBox will enable you to reach speeds of up to 30mph (50kph) or even more! As much as you can pedaling!

All SpeedBox's come complete with an instruction manual, you can also find a video tutorial below.

If you have any questions regarding the setup please do not hesitate in contacting us, we are happy to help.

Which Speedbox Tuning Kit do I need?

This tuning kit is compatible with all Giant 2017-2020 E-Bikes; E-MTB; E-Mountain Powered by Yamaha Motor manufactured 2017-2020.

This tuning kit works even with the latest Giant 2021 only for these models: Talon and Liv. It doesn't work with Trance and Stance 2021 eBikes.

If you have Giant 2015-2016, you will need this Tuning Kit.

Assembly

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the chip is activated.

Find the installation video here

Legal

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

SpeedBox Products are thoroughly tested and we stand by their quality.

SpeedBox provide Life Long warranty to all their Products!

If You have any question, please do not hesitate to contact us.

Thank you for looking!

Two Wheels Empire Team

SpeedBox 2.0 for Giant 2017 - 2020 ebike chip SB

SpeedBox 2.0 for Giant 2017 - 2020 ebike chip SB Tuning Kit

SpeedBox 2.0 for Giant 2017 - 2020 ebike chip SB Tuning Kit with Crank Puller

SpeedBox 1.0 for Brose Specialized

Regular price £125.00 Save £-125.00

SpeedBox 1.0 Tuning Kit Compatible with all Brose Specialized motors

“Easy to fit and the bike flies now. Many thanks” - Mark

Product Features

SpeedBox 1.0 for Brose Specialized is a revolutionary tuning kit which suppresses the speed limiter of your electric bike.

After installing your SpeedBox Brose, the display will show half values speed.

Brose Specialized display Shows real values up to 13.67mph (22km/h). Then the speed indicator gets stabilised and keeps on showing the same value even at higher speeds. The motor's electric assistance switches off when reaching 30mph (50 km/h).

Activation - activated at all times.

All SpeedBox's come complete with an instruction manual, you can also find a video tutorial below.

If you have any questions regarding the setup please do not hesitate in contacting us, we are happy to help.

Which Speedbox Tuning Kit do I need?

This tuning kit is compatible with all eBikes; eMTB; eMountainBikes.

SpeedBox 1.0 Brose Specialized - Brose Specialized, Brose S and Brose S-MAG Motors.

If you have an e-bike with Brose motor, you will need this Tuning Kit.

Assembly

If You are planning to install SpeedBox on brand-new eBike, make sure you ride it for at least 0.6miles (1km) before the Tuning Kit is activated.

Installation is easy, you just need to remove the cover from the motor and attach the connectors. You will need a basic toolkit, some bikes may require a crank puller.

Find the installation video below:

SpeedBox 1.0 For Brose Specialized

Legal

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

SpeedBox Products are thoroughly tested and we stand by their quality.

SpeedBox provide Life Long warranty to all their Products!

If You have any question, please do not hesitate to contact us.

Thank you for looking!

Two Wheels Empire Team