SpeedBox B.Tuning 3.0 visiems Bosch varikliams be Smart sistemos

SpeedBox 3.0 B.Tuning mikroschema yra aukščiausios klasės produktas, puikiai optimizuotas galingiausiam važiavimui ir patirčiai. Ji sumažina greičio ribotuvą, kad galėtumėte mėgautis važiavimu neribotu greičiu. Dėka SpeedBox App mobiliosios programėlės galite stebėti ir saugoti visus savo kelionės parametrus savo telefono ekrane bet kur ir bet kada.

The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:

Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]

The tuning kit can be activated directly from the mobile application or on yours bike display. After pressing the 'WALK' or '+ - + - ' or 'WALK' and '+' buttons, a value of 6.2 mph or 9.9 kph is displayed and from now on you will be able to ride at a speed of 25mph (40 kph), 31mph (50 kph) and even more than 37mph (60 kph). As much as you can pedal!

At the first start, SpeedBox App will ask you to create a new PIN code to provide maximum security for your e-bike. This code will serve for everyday access to your App.

After creating your PIN code, SpeedBox App will ask you to set up your Service password. This will serve you in case you need to change the PIN code.

You can set the maximum speed pf an electric assistance by changing modes: Turbo - EMTB- Tour - Eco - Tour - EMTB - Turbo. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing 'WALK' button shortly or by turning the rear wheel 360° .

The value of 0.93 mph (1.5 kph) on the display corresponds with the limit of 9.3 mph (15 kph),
1.2 mph (2 kph) corresponds with the limit of 12.4 mph (20 kph),
1.5 mph (2.5 kph) corresponds with 15.5 mph (25 kph),
1.8 mph (3.0 kph) corresponds with 18.6 mph (30 kph),
6.1 mph (9.9 kph) corresponds with 61.5 mph (99 kph) etc.
The last displayed limit will be saved after 5 seconds of inactivity.

When using SpeedBox 3.0 B. Tunng with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 mph or 0.0 kph is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip.

Šis derinimo rinkinys yra suderinamas su visomis e-dviračiais; eMTB; eKalnų dviračiais, turinčiais Bosch variklį, pagamintą nuo 2014 iki 2023 metų. Įskaitant visus Active Line, Active Line Plus, Cargo Line, Performance Line, Performance Line Speed, Performance Line CX modelius, įskaitant 4-osios kartos variklius.

Suderinamas su ekranais:
- KIOX
- INTUVIA
- NYON
- PURION
- COBI

Suderinamas su varikliais (įskaitant Gen4):
- Active Line Plus
- Performance Line
- Performance Line CX Linija
- Performance Line Speed
- Cargo Line

Nesuderinamas su:
- Bosch Smart System

Atnaujinus savo e-dviračio programinę įrangą, pirmiausia pašalinkite SpeedBox iš e-dviračio, atnaujinkite programinę įrangą ir vėl įdiekite SpeedBox.

Jei jūsų e-dviratis turi Bosch Gen4 su Smart System, rekomenduojame SpeedBox 1.0 už Smart System (įskaitant Gen4) arba SpeedBox 1.0 B.Tuning už Smart System (įskaitant Gen4).
Jei jūsų ebike turi Bosch Smart sistemą su ratų magnetu, jums reikės SpeedBox 1.2 B.Tuning už Bosch (Smart System + Ratų Magnetas) arba SpeedBox 1.2 už Bosch (Smart System + Ratų Magnetas)

Prijungdami Tuning Kit prie e-dviračio, rasite spalvotus jungtis, kad diegimas būtų labai paprastas. Mes paruošėme išsamius nurodymus ir vaizdo įrašus, kad diegimas jums būtų lengvas. Mūsų tuning kit išardymas yra toks pat lengvas. Jei turite kokių nors problemų su diegimu ar išardymu, nedvejodami susisiekite su mumis.

Jei planuojate įdiegti SpeedBox ant visiškai naujo dviračio, įsitikinkite, kad juo važiuojate bent 0,6 mylios (1 km) prieš aktyvuojant tuning kit.

Diegimo vadovas:

Vaizdo įrašas, paaiškinantis Count Down funkciją:

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk.

The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

SpeedBox Products are thoroughly tested and we stand by their quality. SpeedBox provide Life Long warranty to all their Products!

If You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team

Warranty does not cover damage resulting from eBike software updates. Remove the tuning kit before updating the software. Check with us first to ensure the kit is compatible with your updated eBike. We cannot guarantee that the kit will function the same after updates. Please exercise caution. If your Speedbox tuning kit needs updating due to updated eBike software, please contact us at hi@twowheelsempire.com. Preliminary costs are 49£ + shipping costs.