BadassBox 4 Brose

The contactless and wireless badassBox transmits a modified speed signal in order to override the speed limit of your e-bike – without interfering with the motor's electronic circuitry or software. There's no need to open the motor and there is no risk of damaging it, the BadassBox can be fitted or removed in seconds.

This tuning kit is made to fit bicycles with Brose motors; please check the speed sensor type to select the right kit:

You need the BadassBox 4 Brose if your speed sensor looks like this:



And you need the BadassBox 4 Brose CS if your speed sensor looks like this:



A quality product designed, engineered and manufactured in Germany.

The delivery includes the following parts:
- one badassBox 4 Brose
- one badassBox 4 housing cover
- one AAA battery
- one spoke magnet with thumb screw

The badassBox 4 Brose is fitted over the Brose speed sensor next to the rear wheel. When the snap-lock clicks into position, the badassBox is fitted securely to the sensor.­ For extra secure fitting, the badassBox can also be fastened with a zip tie.

Once the badassBox has been fitted onto the sensor, the spoke magnet must be offset to the casing edge in the direction of the snap-lock clasp. It's now ready for use.

Installation Guide:

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of BadassBox products. Electric bikes equipped with BadassBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with BadassBox products can be used exclusively on private property and entirely at one’s own risk. The use of BadassBox products may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

BadassBox products are thoroughly tested and we stand by their quality - Badass Box provides 2 years warranty to all their products.

In case of updating the software of your e-bike, uninstall the tuning kit from the e-bike first, update the software and reinstall tuning kit back. Product's warranty does not cover eBike software updates. We recommend to contact us before updating the software.