Frequently Asked Questions
SpeedBox 3.0 is third generation with an option to set a speed limit of an e-bike. Deresticts your e-bike to reach maximum speeds! After the chip is installed, your e-bike’s display will show real data, such as maximum and average speeds, daily mileage and cruising range.
The tuning kit can be activated directly on your bike’s display. After pressing the 'WALK' or ' + - + - ' buttons, a value of 6.2 mph (9.9 km/h) is displayed and from now on you will be able to ride at a speed of 25 mph (40 km/h), 31 mph (50 km/h) and even more than 37 mph (60 km/h).
To deactivate the tuning kit, press the 'WALK' button again. The value of 1.6 mph (2.5 km/h) will appear on your display and the speed limit will reset to 16 mph (25 km/h). Your e-bike will then work the same as before installation of the chip.
You can set the maximum speed of an electric assistance by changing modes: Turbo - Sport - Tour - Eco - Tour - Sport - Turbo. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing WALK button shortly or by turning the rear wheel 360°. The value of 0.9 mph (1.5 km/h) on the display corresponds with the limit of 9.3 mph (15 km/h), 1.2 mph (2 km/h) corresponds with the limit of 12.4 mph (20 km/h), 2,5 corresponds with 15 mph (25 km/h), 3,0 corresponds with 18.6 mph (30 km/h), 9,9 corresponds with 61.5 mph (99 km/h) etc. The last displayed limit will be saved after 5 seconds of inactivity.
When using SpeedBox 3.0 with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 mph/km/h is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip.
This tuning kit is compatible with all eBikes; eMTB; eMountainBikes that have a Bosch Motor manufactured from 2014-2023. Including all Active Line, Active Line Plus, Cargo Line, Performance Line, Performance Line Speed, Performance Line CX models including motors of the 4th generation.
Compatible with displays:
Compatible with motors (incl. Gen4):
- Active Line Plus
- Performance Line
- Performance Line CX Line
- Performance Line Speed
- Cargo Line
Not compatible with:
- 2022 Bosch Smart System
In case of updating the software of your e-bike, uninstall SpeedBox from the e-bike first, update the software and reinstall SpeedBox.
If you would like to use Speedbox app, we recommend to use Speedbox 3.0 B. Tuning.
If your e-bike has Bosch Gen4 with Smart System, we recommend SpeedBox 1.0 for Smart System (incl. Gen4) or SpeedBox 1.0 B.Tuning For Smart System (incl. Gen4).
If your ebike has Bosch Smart system with rim magnet, you would need SpeedBox 1.2 B.Tuning for Bosch (Smart System + Rim Magnet) or SpeedBox 1.2 for Bosch (Smart System + Rim Magnet)
When connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning kit is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated.
Video explaining Count Down function:
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk.
The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.
SpeedBox Products are thoroughly tested and we stand by their quality. SpeedBox provide Life Long warranty to all their Products!
If You have any questions, please do not hesitate to contact us. Thank you for looking! Two Wheels Empire Team
In case of updating the software of your e-bike, uninstall the tuning kit from the e-bike first, update the software and reinstall tuning kit back. Product's warranty does not cover eBike software updates. We recommend to contact us before updating the software.
Unlock the full potential of your ebike!
- You will ride faster and experience the thrills of owning a derestricted ebike -you will love the difference!
- Install it effortlessly- quick plug-and-play connection - no setup required.
- Feel safe for your e-bike and warranty- it's safe for ebike and undetectable to keep your warranty safe!
Quick plug-and-play installation. No setup!
- Increase the speed limiter from original 16 mph (25km/h) to unlimited speed!
- See accurate speed on your ebike display!
- Enable/disable when needed! Just press WALK' or '+ - + - ' buttons.
- Get after-sales support from us and lifetime warranty from Speedbox!
The bike feels completely different once derestricted - it's just like a whole different bike! The rides are so much more fun now! Tuning kits are safe to your bike and every ebiker should have one installed! You will love riding your ebike with it - guaranteed!
Matt - Owner of Two Wheels Empire
What Our Clients Say About It?
Who Are We?
From Riders to Riders
In Two Wheels Empire, we trust in innovation, premium quality and sustainability - that's what our business is about. Feel assured all our ebike products are carefully selected and we stand by them: if it's on offer here at Two Wheels Empire - it's been tested and selected by our team. Riders working with us are here to help you enjoy your ebike rides!
We are here to build an Empire, of people who strive for freedom, thrills and adventure, it's about time to make the best of your rides!