Is my Volspeed compatible with Bosch software?

Is my Volspeed compatible with Bosch software?

We are constantly evaluating the functionality of our tuning modules with the different software versions from Bosch. An overview of the compatible software versions for our VOLspeed Bosch V2, V3 and V4 modules can be found in the following tables. All older software versions are also compatible.

Motor Type Software Version Compatible Remark
Active Line Gen2 from MY2014 1.8.6.0 yes
Active Line (Plus) Gen3 from MY2018 1.2.3.0
1.3.0.0 *
1.3.3.0 *
yes
Performance Line Gen3 from MY2020 1.2.3.0
1.3.0.0 *
1.3.3.0 *
yes
Performance Line (CX) Gen2 MY2014-2019 1.8.6.0 yes
Performance Line CX Gen4 from MY2020 1.0.3.0
1.1.0.0 *
1.1.2.0 *
1.1.5.0 *
yes V3 + V4 only
Cargo Line from MY2020 1.1.2.0 *
1.1.5.0 *
yes V3 + V4 only

*) V2 and V3 only: We recommend setting a maximum speed limit of 35km/h to permanently prevent the tamper detection (error 504) from responding. A higher limit does not necessarily lead to the error, but increases the probability significantly.

Display Type Software Version Compatible Remark
Purion 1.4.0.0 yes
Intuvia 5.9.2.0 yes
Kiox 4.0.2.0 yes
Nyon 1GB 1.9.2.0 yes
Nyon 8GB 2.9.2.0 yes
Nyon from MY2021 3.0.0.0 yes 2)
Smartphone Hub 1.0.7.0 yes 1)
COBI.Bike 1.16.4 yes 1)

Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.