Peartune MSO 4.0 For Brose Sram motors only

The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:

Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]

Activation and deactivation is possible via WALK and via +/- buttons.

As default chip is automatically ON when you start the bike, but later you can deactivate easily again (by WALK or +/-) . 99% ebikes with SRAM use no display, so the activation has no indication logically. So it is ON once bike is ON - but just one press of walk for example and the bike is limited at 25kmh again.

Auto shift function has to be DEACTIVATED when chip is in use, it can't work together!!!

Chip lock ("Lock the Chip" function): A feature that makes the tuning module virtually invisible. If the chip lock is activated by using the + and - buttons at the control element, the tuning chip is locked on the software side so that no one can recognize that a tuning tool has been installed on the e-bike. This means that the e-bike and display will function normally, and the tuning can no longer be switched on. The chip lock can only be deactivated later, and again with a specific + and - key combination.

With PearTune 4.0 you can set an individual activation code. When switching on and off, the display briefly shows whether the tuning was actually activated or deactivated for confirmation.

Service menu video:

Activation and deactivation is possible via WALK and via +/- buttons.

As default chip is automatically ON when you start the bike, but later you can deactivate easily again (by WALK or +/-) . 99% ebikes with SRAM use no display, so the activation has no indication logically. So it is ON once bike is ON - but just one press of walk for example and the bike is limited at 25kmh again.

Auto shift function has to be DEACTIVATED when chip is in use, it can't work together

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

Peartune products are thoroughly tested and we stand by their quality - Peartune provides Lifetime warranty to all their products.

Warranty does not cover damage resulting from eBike software updates. Remove the tuning kit before updating the software. Check with us first to ensure the kit is compatible with your updated eBike. We cannot guarantee that the kit will function the same after updates. Please exercise caution.