SpeedFun Furious Evo for Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) motors
5.0 · 1 reviewDerestrict your e-bike for 30 mph (50 km/h) speeds!
The active tuning kit makes the speedometer show a slower speed
Tuning kit removes speed limit up to 31mph (50 km/h)
The tuning kit can be activated / deactivated at any time
FREE DELIVERY IN MOST REGIONS
1 YEAR WARRANTY
EASY TO INSTALL
What does this Tuning Kit do?
Achievable speed
Calculate your speed
The achievable speed mostly depends on the eBike model. Enter your own values:
Check the highlighted values to see your speed.
This kit: Tuning kit removes speed limit up to 31mph (50 km/h)
Theoretical value from cadence and gearing only. Your real speed also depends on the motor, the tuning kit, the rider and the terrain.
Speed = cadence [rpm] × wheel circumference [mm] × front chainring teeth ÷ rear sprocket teeth × 60 [min/h] ÷ 1,000,000 [mm/km]
Is this the right tuning kit for my e-bike?
SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebikes with Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) motors mounted mostly on Olympia ebikes (in this case often with the wording “Tuned by Olympia”) regardless of the type of display or side control of the ebike.
Compatible with:
Motors:
- Ananda M60 M81 M100 M230
- Atala AM80 Agile (Gen. 2)
Not Compatible with: This device is not compatible with Atala AM80 Agile (Gen. 1) motor. The product compatible with Atala AM80 Agile (Gen. 1) motor is available HERE
E-bikes with Ananda M60 M81 M100 M230 and Atala AM80 Agile (Gen. 2) motors where the Furious Evo device was successfully installed:
Ananda M100 tuned by Olympia
- Olympia EX 900 and EX 900 Prime
- Olympia Performer 900 and Performer 900 Prime
- Olympia Mistral 900
Ananda M81 tuned by Olympia (100Nm)
- Olympia EX 900 Trail
- Olympia Master 630 29″ or Master 630 26″
- Olympia Explorer 630
- Olympia Super Magnum man and Super Magnum comfort
Other ebikes M60 M81 M100 M230
- Nakamura Crossover XV
- Puch E-Modern N7
How to Install this tuning kit?
FAQ & legal
How does the SpeedFun work?
Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]
IMPORTANT Activation and deactivation:
- Turn the ebike off and on again. Do not move it or do other operations.
- Raise the rear wheel, give a strong pedal with the longest (hardest) gear engaged. Let it run for a few seconds.
- The system recognizes the acceleration and considers it as an activation or deactivation command (cyclically). Upon activation, the display shows the speed that change from real to halved in the manner described above. When deactivated, the display shows the speed change from halved to real and the bike returns to its original state.
Important legal note!
The use of SpeedFun may void the warranty of your ebike. We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.
eBike Software Updates
Warranty does not cover damage resulting from eBike software updates. Remove the tuning kit before updating the software. Check with us first to ensure the kit is compatible with your updated eBike. We cannot guarantee that the kit will function the same after updates. Please exercise caution.
Product safety information (GPSR)
Rider reviews
What riders say about this kit
Write a review
Loading reviews…
Loading reviews…
Need a hand?
Couldn’t find the perfect tuning kit?
No worries — reach out to us through the contact form below or ping us on WhatsApp!
We’re here to help, and we promise we’re friendlier than your bike’s squeaky brakes after a muddy ride!