SpeedFun Ghost for Mahle Ebikemotion X35 and X35+

Derestrict your e-bike to reach maximum speeds!

Remove speed limits of 16mph (25 km/h) so you would have further motor assistance for your Mahle Ebikemotion X35 and X35+ motor.

Regular price£169.00
/

&Free Delivery Worldwide

You can save money when buying more than one tuning kit. Can be combined with other brand/type tuning kits!
Buy 2 save £5.07
£169.00 £163.93
Buy 3 save £11.83
£169.00 £157.17

GO FROM CAPTAIN SLOW OF YOUR CYCLING GROUP TO JIMMY JET!

- TOM E.

free shipping FREE SHIPPING WORLDWIDE
warranty 1 YEAR WARRANTY
easy to install EASY TO INSTALL

Main Product Information

After the Tuning kit is installed - factory speed limit is removed! Due to the constructive characteristics of this type of motor it is possible to reach around 18/19mph (29/30 km/h) depending on the ebike model and gearing.

The tuning kit for Ebikemotion X35 will be active right away after installation. If you do use app or display with your ebike, you will not be able to see real data. Assistance is slightly reduced beyond 16mph (25kmh).

The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:

Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]

The tuning kit for Ebikemotion X35 will be active right away after installation. If you do use app or display with your ebike, you will not be able to see real data. Assistance is slightly reduced beyond 16mph (25kmh).

After installing your SpeedFun, due to the constructive characteristics of this type of motor it is possible to reach around 18/19mph (29/30 km/h) depending on the ebike model and gearing.

The Chip for Ebikemotion x35 SpeedFun Ghost is available in only one version:
- Slim Version: this round section version measures ∅14 x 170 mm and is slightly flexible. It can be inserted partially or totally inside the tubes in the frame or be fixed externally. Before buying, please check the size on your ebike.

Tuning kit was testes with these ebike models:
- Orbea Gain
- Orbea Vibe H10, H10 Mud e H10 EQ
- Orbea Vibe H30, Vibe H30, H30 Mud e H30 EQ
- Olmo e.vento sport
- SuperSix EVO Neo 3
- Bianchi Aria
- SuperSix EVO Neo 3
- Bianchi Aria E-Road (to install the device you need to remove the cover that goes from the battery to the engine)

Follow these steps for the installation:
1. Remove the zip tie holding the connector cable.
2. Unplug the connector. *DO NOT ROTATE THE CABLE WHILE UNPLUGGING*
3. Slide the female connector wire into the frame (9-10cm.)
4. Connect the Ghost tuning kit as shown. *PAY ATTENTION TO THE ARROWS*
5. Secure the tuning kit using zip tie.

If you are planning to install SpeedFun on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the chip is activated.


Installation Guide:

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedFun may void the warranty of your ebike. We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

Warranty does not cover damage resulting from eBike software updates. Remove the tuning kit before updating the software. Check with us first to ensure the kit is compatible with your updated eBike. We cannot guarantee that the kit will function the same after updates. Please exercise caution.

Unlock the full potential of your ebike!

  • You will ride faster and experience the thrills of owning a derestricted ebike -you will love the difference!
  • Install it effortlessly- quick plug-and-play connection - no setup required.
  •  Feel safe for your e-bike and warranty- it's safe for ebike and undetectable to keep your warranty safe!

SpeedFun Ghost for Mahle Ebikemotion X35 and X35+
SpeedFun Ghost for Mahle Ebikemotion X35 and X35+

Quick plug-and-play installation. No setup!

  • Increase the speed limiter from original 16 mph (25km/h) for a new speed limit!
  • Enable/disable when needed!
  • Get after-sales support from us and a one year warranty from Speedfun!

quote

The bike feels completely different once derestricted - it's just like a whole different bike! The rides are so much more fun now! Tuning kits are safe to your bike and every ebiker should have one installed! You will love riding your ebike with it - guaranteed!

Matt - Owner of Two Wheels Empire

What Our Clients Say About It?

Who Are We?

From Riders to Riders

In Two Wheels Empire, we trust in innovation, premium quality and sustainability - that's what our business is about. Feel assured all our ebike products are carefully selected and we stand by them: if it's on offer here at Two Wheels Empire - it's been tested and selected by our team. Riders working with us are here to help you enjoy your ebike rides!

We are here to build an Empire, of people who strive for freedom, thrills and adventure, it's about time to make the best of your rides!