TC500 2.X
The smart first upgrade
- Max system power
- 30 kW
- Phase current
- 500 A
- Battery current
- 350 A
- Light Bee
- Talaria MX3
- MX4 / Sting R
- MX5
60–80 V · IP67 · 1 kg · 2-year warranty
The TC500 2.X lifts the Talaria MX5 from 13.4 kW to 17 kW peak on the stock battery, and to 22 kW with an 80 V pack. Same app, firmware and factory integration as the TC1000, at a lower price.
Talaria battery check: Greenway packs communicate with the controller; SCUD packs have no BMS communication. Tell us your battery if you are unsure.
IP67 note: the controller is sealed, but the controller and bike harnesses are not waterproof. If the bike gets wet, fill every connector with dielectric grease (a pack is included). Damage from frequent or long submersion, such as riding through rivers or flooded tracks, is not covered by the 2-year warranty.
TORP Motors · Engineered in Croatia
A controller that keeps your stock battery, display and sensors, and unlocks the power the factory left on the table.
TC500 2.X
Pick your bike
TORP's peak power figures for each bike: stock, with a TORP controller on the stock battery, and a full TORP build.
Shop this build for SurRon Light Bee
Controller kit
TORP TC1000 2.X Controller kit for SurRon Light Bee / TM25 / TM40 / TM40Pro motor
1,016.51 EUR
Controller kit
TORP TC500 2.X Controller Kit For Surron Light Bee
780.14 EUR
Motor
TORP TM25 Motor
from 737.16 EUR
80 V battery
SurRon Light Bee 80V 50Ah Performance (S) Battery
2,557.02 EUR
Display
Torp Full-Color Display
158.83 EUR
Shop this build for Talaria MX3
Shop this build for Talaria MX5
Peak estimates from TORP, not guaranteed output. Real power depends on the full setup: battery, motor, BMS and settings.
Plug & play
No bypass. No splicing.
TORP controllers talk to the stock BMS, so you keep your original battery, display, sensors and ride modes. The kit plugs into the factory connectors.
Inside the 2.X generation
Up to 50 kW peak on the TC1000 and 30 kW on the TC500 with a TORP motor and 80 V battery. FOC control, sensored and sensorless.
Talks to the original BMS, so the stock pack keeps its protection and you can upgrade the battery later.
Set regenerative braking, throttle response and current limits separately for Sport, Eco and Daily in the app.
Built-in wheelie control hardware, switched on with a firmware update from the TORP App. Calibrate before you ride.
Over-current cut-in under 1 microsecond, over/under-voltage and temperature protection, automotive-standard redundant throttle.
Pre-calibrated and delivered with the harness, hardware and grease. Plugs into the factory connectors.
Choose your controller
Same firmware, app and factory integration. The TC1000 doubles the current headroom for big motor and battery upgrades, and it is the one for the Ultra Bee.
The smart first upgrade
60–80 V · IP67 · 1 kg · 2-year warranty
Maximum headroom
60–80 V · IP67 · 1.3 kg · 2-year warranty
A bigger controller does not add power on its own: on a stock battery and motor, both controllers deliver the same peak power.
Pre-calibrated · Plug and play
Remove the stock controller and fit the TORP unit with the supplied hardware.
Connect the TORP harness to the factory connectors. No cutting or splicing.
Fill every connector with the included dielectric grease.
Lift the rear wheel and calibrate in the TORP App. Then ride.
Free · iOS & Android · Bluetooth
Tune ride modes, read every battery cell, update firmware and run diagnostics over Bluetooth. No laptop, no cables.
Motors · displays · parts
Need a hand?
Send us your bike model and your question, and we'll help you find the right part.
Rider reviews
Loading reviews…
Loading reviews…