TC500 2.X
The smart first upgrade
- Max system power
- 30 kW
- Phase current
- 500 A
- Battery current
- 350 A
- Light Bee
- Talaria MX3
- MX4 / Sting R
- MX5
60–80 V · IP67 · 1 kg · 2-year warranty
If Pre-ordered, orders will be dispatched 1-3 weeks after ordering. Please contact us for more precise information.
The TC500 2.X is the smart first upgrade for the SurRon Light Bee / Segway X260. It works with the stock battery and display, reaches up to 19 kW with an 80 V battery on the stock motor, and up to 30 kW with an 80 V battery and the TORP TM25 motor.
Light Bee 2026 is not supported yet: this kit fits the 60 V SurRon Light Bee / Segway X260 up to model year 2025. The 2026 Light Bee (72 V / 10 kW) uses different wiring.
IP67 note: the controller is sealed, but the controller and bike harnesses are not waterproof. If the bike gets wet, fill every connector with dielectric grease (a pack is included). Damage from frequent or long submersion, such as riding through rivers or flooded tracks, is not covered by the 2-year warranty.
TORP Motors · Engineered in Croatia
A controller that keeps your stock battery, display and sensors, and unlocks the power the factory left on the table.
TC500 2.X
Pick your bike
TORP's peak power figures for each bike: stock, with a TORP controller on the stock battery, and a full TORP build.
Shop this build for SurRon Light Bee
Shop this build for Talaria MX3
Peak estimates from TORP, not guaranteed output. Real power depends on the full setup: battery, motor, BMS and settings.
Plug & play
No bypass. No splicing.
TORP controllers talk to the stock BMS, so you keep your original battery, display, sensors and ride modes. The kit plugs into the factory connectors.
Inside the 2.X generation
Up to 50 kW peak on the TC1000 and 30 kW on the TC500 with a TORP motor and 80 V battery. FOC control, sensored and sensorless.
Talks to the original BMS, so the stock pack keeps its protection and you can upgrade the battery later.
Set regenerative braking, throttle response and current limits separately for Sport, Eco and Daily in the app.
Built-in wheelie control hardware, switched on with a firmware update from the TORP App. Calibrate before you ride.
Over-current cut-in under 1 microsecond, over/under-voltage and temperature protection, automotive-standard redundant throttle.
Pre-calibrated and delivered with the harness, hardware and grease. Plugs into the factory connectors.
Choose your controller
Same firmware, app and factory integration. The TC1000 doubles the current headroom for big motor and battery upgrades, and it is the one for the Ultra Bee.
The smart first upgrade
60–80 V · IP67 · 1 kg · 2-year warranty
Maximum headroom
60–80 V · IP67 · 1.3 kg · 2-year warranty
A bigger controller does not add power on its own: on a stock battery and motor, both controllers deliver the same peak power.
Pre-calibrated · Plug and play
Remove the stock controller and fit the TORP unit with the supplied hardware.
Connect the TORP harness to the factory connectors. No cutting or splicing.
Fill every connector with the included dielectric grease.
Lift the rear wheel and calibrate in the TORP App. Then ride.
Free · iOS & Android · Bluetooth
Tune ride modes, read every battery cell, update firmware and run diagnostics over Bluetooth. No laptop, no cables.
Motors · displays · parts
Need a hand?
Send us your bike model and your question, and we'll help you find the right part.
Rider reviews
Loading reviews…
Loading reviews…